1/3 Size Biesse Vacuum Block 132x54x74 Vacuum Suction Cup Woodworking Machinery

Need the 74 mm tall block that holds a panel flat on a Biesse table? This is that part: 132 mm long, 54 mm wide, 74 mm high, the 1/3 size vacuum block, moulded in PF (phenol formaldehyde) plastic. Brown is standard and grey is also available. It mounts on the existing vacuum block with no adapter plate, holds wood, plastic and composite panels through routing, drilling, cutting and edge shaping, and is listed against nine exchange numbers. Customization is supported for non-standard height or colour; price is quoted per order.

A nesting table usually fails in three places at once: the tallest pods lose their seal first, a panel lifts a fraction of a millimetre at that high point, and the replacement arrives at the wrong height, so the grid must be levelled again. The 132x54x74 vacuum block settles all three. It is a fixed-size part, 132 mm long, 54 mm wide, 74 mm tall, ordered as the height you run, so nothing is packed underneath.

It is one vacuum pod, moulded in PF (phenol formaldehyde) plastic, the brown thermoset of the bakelite family, also produced in grey. Under vacuum a thermoset body keeps its 132 x 54 mm section instead of closing inward like a soft rubber cup. It sits on the existing vacuum block at the same slot position, with no adapter plate and no re-drilling.

This is the 1/3 size block: 54 mm across, 74 mm high. It seats workpieces for routing, drilling, cutting and edge shaping on Biesse CNC machines and machining centres, in woodworking, plastic fabrication and composite machining, where a panel must stay still instead of creeping.

Customization is supported for non-standard height or colour, and the pod is listed against nine exchange numbers, including AS24M00421, so a worn seat is matched by number. Brand SHUNHONGYU, origin China, price quoted per order.

The numbers below decide whether the pod seats on your table without a shim, and what changes when it does.

• Fixed 74 mm height - the body measures 74 mm as ordered, so a high position is filled by a 74 mm pod, not a shorter cup packed up on shims.
• 132 x 54 mm footprint - the 1/3 size block matches the existing slot pitch, so the block you already have accepts it without re-machining.
• PF thermoset body - phenol formaldehyde plastic holds its 132 x 54 mm section under vacuum, where soft rubber closes up as the pump pulls.
• Brown standard, grey too - 2 colours are produced; a fresh pod in the other colour is visible on a walk-round of the table.
• Drop-in Biesse spare - listed for Biesse CNC machines and machining centres, mounted on the existing block with no adapter plate.
• Nine exchange numbers - AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159 and 6308A0160 are listed against this pod.
• Three material groups - wood, plastic and composite panels use the same pod, so a mixed-material week needs one spare, not three.
• Single-part ordering - supplied as one replacement pod, so a cracked seat costs one part, not a table set.
• Customization supported - a non-standard height or colour is produced to order, from the same source as the standard part.

The choice on a worn pod is usually between running it until a panel slips mid-cut and buying a set of pods you do not need. Neither is a good trade.

• Buy the height you run. The 74 mm body is ordered on its own, so a high position gets a 74 mm pod instead of a shorter cup shimmed up to table height.
• A seal line that stays closed. A machined face and a thermoset body keep the contact ring continuous around 132 x 54 mm, so vacuum holds the panel instead of leaking past a witness mark.
• One pod, three material schedules. Wood, plastic and composite panels are held by the same 132 x 54 x 74 mm pod, so a mixed week needs one spare.
• Consumable logic, not capital logic. Pods wear out; a single replacement keeps a worn seat at one part instead of a table set.
• Colour as a maintenance cue. Brown is standard and grey is also available, so a fresh pod stands out within a 1-minute walk-round.
• Matched by number, not by photo. Nine exchange numbers are listed against this pod, so a clerk confirms the part before the order leaves.
• Custom sizes without a new supplier. Because customization is supported, a non-standard height or colour comes from the same source.

Only if the position takes a 132 x 54 x 74 mm pod. The block is listed as a spare for Biesse CNC machines and machining centres and mounts on the existing vacuum block without an adapter plate, but length, width and height are fixed at 132 mm, 54 mm and 74 mm, so measure the pod you are pulling off first.

132 mm long, 54 mm wide and 74 mm high. Overall size is quoted as 132x54x74 mm, the SKU is 132x54x74, and the 54 mm width is what the listing calls the 1/3 size block.

PF, phenol formaldehyde plastic. That is a thermoset in the bakelite family, and it matters under vacuum: the body holds its 132 x 54 mm section instead of collapsing inward the way a soft rubber cup does.

Brown is standard and grey is also produced. Both are the same PF part at 132 x 54 x 74 mm; colour is a visual cue on the table, not a difference in the seal.

Yes. Customization is supported, so a non-standard height or colour is produced to order, with the 132x54x74 mm brown version as the baseline.

Match the number on the old pod against the nine exchange numbers listed for this block: AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159 and 6308A0160. If none of the nine matches, measure length, width and height against 132 x 54 x 74 mm before ordering.

No. It is supplied as a single replacement pod, so a cracked seat is a one-part order, and replacing only the failed position keeps the rest of the table at its existing levelled height.

Wood, plastic and composite panels. The listing covers woodworking, plastic fabrication and composite machining, and the pod holds the workpiece through routing, drilling, cutting and edge shaping, where a panel that creeps ruins the cut.