CNC Vacuum Pods Replacement for Biesse Dimensions 160mm x 152mm x 24mm High with Valve

Replacing a vacuum pod on a Biesse table usually means waiting on an import part while a damaged pod keeps leaking. This pod is 160 × 152 × 24 mm, 0.7 kg, PVC, black, and it ships with its valve. The footprint is 8 mm longer than it is wide, so it seats one way only, and it is listed as a spare for Biesse CNC machining centres. Part number 55115473. Customisation is supported and the price is by quotation.

Three things go wrong when pods are treated as consumables. A damaged pod stays in the middle of a nesting grid, and every sheet cut over it lifts at the corner. A pod shipped without its valve borrows one from a spare. And a pod bought by height alone, without the 160 × 152 mm footprint, sits 8 mm out of line and leaks. This replacement pod closes all three.

It is a 160 × 152 × 24 mm CNC vacuum pod for Biesse CNC machining centres, delivered with its valve. Because the footprint is 8 mm longer than wide, the pod drops into the grid in one orientation — the same orientation as the part it replaces. The valve is inside the delivery, not a separate purchase-order line, and 24 mm is the height the grid was set for.

Net weight is 0.7 kg per pod, light enough for one operator to lift a worn pod out and press a new one in without help. The body is PVC in black. Function is vacuum clamping of workpieces on woodworking tables through cutting, drilling and milling.

It is listed as a spare for Biesse machines, so it is bought against the machine model and the footprint, not a colour chart. Customisation is supported. Origin is China and price is by quotation, because quantity and freight move the number.

What the pod is, in the terms a maintenance buyer checks:

• Valve in the box — the pod is supplied with its valve, so one replacement order closes one gap instead of two.
• 160 × 152 × 24 mm footprint — 8 mm longer than wide, so it locates in the grid in one orientation only.
• 24 mm height — the pod stands at the height the nesting grid was set for, so panel support does not change.
• 0.7 kg net per pod — one operator can lift a pod out and press a new one in by hand, between sheets.
• PVC body, black — the material and colour on the specification sheet, in 160 × 152 × 24 mm.
• Listed for Biesse — a spare for Biesse CNC machining centres, aimed at furniture, cabinetry and panel processing.
• Vacuum clamping duty — the pod holds the workpiece down through cutting, drilling and milling, the three operations it is specified for.
• Customisation supported — where a grid has been altered, the pod is quoted against the drawing or the sample you send.
• Quoted, not listed — price is by quotation, because 160 × 152 × 24 mm pods are ordered by the piece in whatever quantity the grid needs.

On a Biesse table, a vacuum pod is either swapped on schedule or run until it leaks. This one is quoted on its own part number and footprint, so the swap can be done before the sheet that fails.

• One part number to reorder. The pod is identified by 55115473 and by 160 × 152 × 24 mm, so a reorder does not depend on whoever raised the last purchase order remembering the shape.
• No separate valve line. Valve included means one item on the sheet instead of two, and the store does not end up holding pods and valves in the wrong ratio.
• 0.7 kg in one hand. A pod swap stays a hand operation, so grid maintenance is done between sheets rather than inside a planned stop.
• The 8 mm difference is the alignment. A 160 × 152 mm pod seats one way only; ordering the same footprint keeps panel height and vacuum path where the machine expects them.
• A specification you can check by hand. PVC, black, 0.7 kg, 24 mm high — each line can be measured against the pod you are replacing.
• Customisation when the grid differs. If the table has been modified, customisation is supported and the pod is quoted against the drawing.
• Priced on the order. Quantity and freight are inside the quotation, so the figure you compare covers what you buy.

Biesse CNC machining centres. It is listed as a spare part for Biesse machines and is used for vacuum clamping on woodworking tables during cutting, drilling and milling.

Yes. The valve is included with the pod, so the replacement arrives complete and does not need a separate valve order.

Yes. 55115473 is the reference for this pod, and it is the number to put on an enquiry together with 160 × 152 × 24 mm.

160 × 152 × 24 mm — 160 mm long, 152 mm wide, 24 mm high. The footprint is 8 mm longer than it is wide, so the pod fits the grid in one orientation.

0.7 kg net. That is light enough for a single operator to remove and refit a pod by hand.

PVC, in black. Both are stated on the specification, so they can be checked against the pod being replaced before it is ordered.

Yes. Customisation is supported; send the drawing, part number or a sample and the pod is quoted against it.

Price is by quotation. Send the quantity, the machine model and the part number 55115473, and the figure comes back against that order.