Sealing Frame Friction Plate Rubber Pad 130*30mm For Vacuum Suction Block

Need to renew the top rubber face of an SCM or HOMAG CNC router suction block without buying a complete vacuum pod? The VCB401 set is the direct answer: one sealing frame plus one friction plate, both moulded in rubber, both grey, both square, measuring 130 x 30 mm (L 130 mm, W 30 mm), and it takes the place of HOMAG top rubber cover 4011110249, which the original listing states at 130 x 30 x 17 mm. The set ships in a carton. Used on the upper suction plates of SCM, HOMAG and other CNC router processing machines.

A shop running SCM or HOMAG CNC router processing machines meets the same three things every few months: a suction block that stops holding a panel flat because its top rubber cover has torn, a quote for a complete new vacuum pod when only the rubber face is worn, and a machine sitting idle while that replacement travels. The VCB401 set fixes the first one by making the worn rubber face a stock item, not a project.

A 2-piece set: a square sealing frame and a friction plate, both moulded in rubber and both supplied in grey. The pad is 130 x 30 mm - 130 mm long (L) by 30 mm wide (W) - the footprint of the top cover it replaces, HOMAG part number 4011110249, listed for that cover at 130 x 30 x 17 mm.

Fit is by position, not by tooling. The sealing frame drops onto the top of the vacuum suction block and the friction plate sits inside it, so the rubber lip that carries the vacuum across the 130 mm length is renewed in one operation.

It is used on the upper suction plates of vacuum pod blocks on SCM, HOMAG and other CNC router processing machines, in woodworking, furniture and panel processing work. One carton holds one set. Price is quoted per order, to be negotiated.

What the set contains, what it measures and where it fits - one line each.

• Two parts, not one. The carton holds the sealing frame and the friction plate together, so a worn top face is renewed in a single order of 1 set.
• 130 x 30 mm footprint. 130 mm length (L) by 30 mm width (W) - the size the suction block top plate is cut for.
• Square sealing frame. A square profile, so the vacuum lip runs straight along all 4 sides of the frame rather than around a circle.
• Rubber for both parts. Frame and plate are both moulded in rubber, which is the material stated for this item, and both are supplied in the same grey.
• Replacement cover reference. The set takes the place of HOMAG top rubber cover 4011110249, which is listed at 130 x 30 x 17 mm - the 17 mm being the cover thickness, not the pad footprint.
• Fits SCM and HOMAG routers. The stated usage is the upper suction plate of vacuum pod blocks on SCM, HOMAG and other CNC router processing machines.
• One number to stock. SKU VCB401 covers the complete set, so the spare-parts bin carries one line instead of two.
• Carton packed. Each set travels in a carton, which is what the specification lists for this item, and the pads keep their square shape in transit.

When a suction block stops holding, the two usual options are both bad: pay for a complete vacuum pod, or keep running a torn rubber face and re-clamp panels by hand. The VCB401 set is the third.

• You replace the face, not the pod. A 2-piece set restores the rubber contact face of the suction block, so the pod and its vacuum circuit stay on the machine.
• The size is decided before you order. 130 x 30 mm, L by W, plus HOMAG cover number 4011110249 as the cross reference, so the part can be checked against your block in 1 measurement instead of a photo exchange.
• Nothing is left half-renewed. Frame and plate arrive as one set in one carton, so a replaced lip is not held back by a plate that was ordered separately and is still in transit.
• One SKU in the spare-parts bin. VCB401 covers the whole set, which means one reorder line, one stock count and one number on the purchase order.
• No tooling to buy first. The square frame is positioned on the top plate; there is no jig, no adhesive and no machining step between the carton and the machine.
• Clear pricing. The price is quoted per order and to be negotiated, so a mixed order of sets and other CNC vacuum cups can be priced in one reply.

Two parts: a sealing frame and a friction plate. Both are rubber, both are grey, both are square, and the pair covers the top face of one vacuum suction block at 130 x 30 mm. One carton holds one set.

Yes, if your block takes top rubber cover 4011110249. Measure the top plate first: it must be 130 mm long (L) by 30 mm wide (W), which is the pad footprint stated for this set. The original cover is listed at 130 x 30 x 17 mm, where 17 mm is the thickness of that cover.

Rubber. The specification for this item lists Material: Rubber, and the frame and plate are both supplied grey. One line in the original source text also mentions a foam gasket, which conflicts with the rubber specification, so confirm the material with us before a repeat order.

No. They ship as one set in one carton. Order 1 set and you get the sealing frame plus the friction plate - not two half orders and two freight charges.

Yes. The stated usage is SCM, HOMAG and other CNC router processing machines, on the upper suction plate of the vacuum pod block. If your machine is a different make, check the cover number and the 130 x 30 mm footprint before ordering.

Nothing extra. The sealing frame sits on the top of the vacuum suction block and the friction plate goes inside the frame, so the fit is decided by the 130 x 30 mm square outline rather than by adhesive or fasteners.

The price is to be negotiated and is quoted per order, so it is not a fixed figure on the page. Send the SKU VCB401, the number of sets you need, and the machine make, and you get a quotation for that quantity.

No. It only fits blocks that take a 130 x 30 mm cover. This set is a replacement for cover 4011110249 at that footprint, so a 140 x 115 mm or 125 x 75 mm block needs a different pad - send the size and it can be quoted separately.