AS24M00421 CNC Vacuum Cups 132*75*74mm Biesse CNC Suction Cups Grey Vac Pods

Need a replacement vacuum pod for a Biesse CNC table? The AS24M00421 is the 132 x 75 x 74 mm cup, also listed as VCB118, supplied in grey with brown available on the same size. It is listed for Biesse CNC machines and does one job: holding the workpiece against the table while the tool cuts. Grey is the standard listing, brown on request, packing is a carton box, OEM marking is available, other sizes are offered. Price is quoted per order — measure 132 mm by 75 mm across, 74 mm high, on the old cup.

A shop running a Biesse CNC table loses money on suction cups in three ways: a cup stops holding and the panel creeps under the cutter, one sheet is written off; a replacement ordered from a photograph arrives with the wrong 132 x 75 mm footprint; and the price question travels for days because nobody quoted a part number. This pod is aimed at all three.

The AS24M00421 is the grey version of the VCB118 Biesse vacuum pod: a suction cup that sits under the workpiece on a Biesse CNC machine and holds it down while the tool cuts. The part data states 132 x 75 x 74 mm — 132 mm by 75 mm across, 74 mm high. Three numbers to measure on the old cup, not one.

Colour is a line on the order, not a surprise. Grey is the standard listing and brown is available on the same size, so a table already running brown cups can stay uniform. OEM marking is available, packing is a carton box, and other sizes are offered when a fixture position is not 132 x 75 mm.

Price is quoted per order rather than listed, which is how a spare-part line usually works: send the part number, the size, the colour and the quantity, and the quote comes back against this pod.

Eight points decide whether a pod belongs on a Biesse fixture. Each one below comes from the part data, so it can be checked instead of trusted.

• 132 x 75 x 74 mm, stated — the size is written in millimetres, so it can be checked against the old cup with a rule before the order goes out.
• Two numbers, one pod — VCB118 is the model code and AS24M00421 the SKU; both point at the same 132 x 75 x 74 mm cup.
• Grey, or brown — two colours on one size: grey is the standard listing, brown suits a table already fitted with brown cups.
• Listed for Biesse CNC — the part data names Biesse CNC machines as the application, and the page claims no fit on other tables.
• Other sizes on the same line — where a position is not 132 x 75 mm, other sizes are offered, so one supplier covers a mixed nest.
• OEM available — marking and customisation are offered, which matters when the cup goes onto a machine that carries the builder's own name.
• Carton box packing — supplied in a carton box, so a small order arrives as a box that goes on a shelf instead of a loose part.
• Quoted against the part number — price is given per order against AS24M00421, so the second order matches the first.

On a Biesse table the real question is not which cup to buy, but how long the nest stands still while the right one is found.

• One number ends the search. AS24M00421 and VCB118 both resolve to 132 x 75 x 74 mm, so a fitter stops comparing photographs of cups that look almost right.
• Measured before money moves. Three numbers, 132, 75 and 74 mm, can be read off the old cup in a minute, so a wrong footprint is caught before the carton is opened.
• Colour does not force a second source. Grey and brown are available on this size, so a table fitted with brown cups keeps one finish and one supplier.
• A mixed nest from one line. Other sizes are offered beside the 132 x 75 x 74 mm pod, so a fixture with mixed positions is covered by a single quote.
• Small part, small freight. A 132 x 75 x 74 mm pod goes into a carton box, so a spare pair adds little weight to a shipment.
• Branding stays consistent. OEM marking is available, so a machine carrying a builder's name can be supplied with a cup that matches it.
• Reorder repeats the first order. Price is quoted against the part number, which leaves only quantity and colour to decide.

Yes, if the position you are replacing takes a 132 x 75 x 74 mm cup. The part data lists it for Biesse CNC machines, and the three numbers — 132 mm by 75 mm across, 74 mm high — are what a fitter checks against the old cup before ordering.

Yes. They are one pod under two numbers: VCB118 is the model code and AS24M00421 the SKU, and both are listed for the 132 x 75 x 74 mm grey cup.

Yes. Brown is available on the same 132 x 75 x 74 mm size. Grey is the standard listing, so a brown order has to say so at the quote stage.

No minimum is stated. Price is quoted per order, so the quantity is the number you ask to be quoted for, and a carton box suits a small replacement order.

In a carton box. That is the only packing line in the part data; if you need a per-carton count or a pallet configuration, ask for it together with the quote.

It is quoted per order — there is no list price on this page. Send the part number AS24M00421, the size, the colour and the quantity, and the figure comes back against those four lines.

Then order another size — other sizes are offered on the same line. Send the footprint and height you need and it is matched to a size instead of a guess.

Yes. OEM is listed as available, so marking and customisation can be quoted together with the pod.