132x75x74 Biesse CNC Vacuum Cup Half Size Block Piston CNC Machining Spare Parts

Replacing a worn vacuum pod on a Biesse Rover does not need a machine shutdown order. This is the 1/2 size block piston pod: 132 mm long, 75 mm across the top face, 74 mm tall on the ATS drawing (131.5 x 75 mm), moulded in PF phenol formaldehyde. It answers to nine OEM numbers — AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160 — with 48 mm and 29 mm pods on the same footprint. Brown is standard, grey available, price quoted per order.

A Rover cell usually stops for one of three reasons: a half size pod has lost its grip under a small panel, a spare ordered by machine brand turns up with the wrong footprint, or a moulded block sits weeks behind an import. On a point-to-point center the smallest item on the table causes all three.

This is the 132 x 75 x 74 mm half size block piston pod for Biesse Rover point-to-point CNC processing centers. The body is moulded in PF, phenol formaldehyde: a phenolic block keeps its flat top face and seal groove under cutting fluid, does not rust at a coolant line, and resists abrasion and chemical exposure.

Size is written the way a fitter measures it. The block is 132 mm long, 75 mm across the top face and 74 mm tall; the ATS pod drawing calls it 131.5 x 75 mm at H = 74. Two lower heights share the footprint, 48 mm and 29 mm, so a low nest and a raised fixture come from one part family.

Nine OEM numbers resolve to this pod: AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159 and 6308A0160. Brown is standard and grey is available. Seal, ball valve and locating ring are separate accessories, so only the worn item is replaced. Origin China, price quoted per order.

Eight details decide whether a pod belongs on your fixture; each is on the part data, so it can be checked against the old block.

• Half size footprint — the block sits in the 1/2 size seat, 132 mm long by 75 mm across the top face.
• 74 mm working height — 48 mm and 29 mm pods on the same footprint cover a lower nest or a raised fixture.
• Moulded PF body — phenol formaldehyde, so the block insulates, holds a flat top face and does not rust where coolant collects.
• Drawing value 131.5 mm — the ATS pod is drawn at 131.5 x 75 mm at H = 74 and listed as 132 x 75 x 74 mm nominal.
• Nine OEM cross references — AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160.
• Brown as standard — grey is available on the same size, so pods can be coded by machine, shift or nest.
• Seal, ball valve, locating ring — the three wearing items are separate accessories, not a kit bundled with the block.
• Listed for Biesse Rover — the application is spares for Rover point-to-point processing centers; no fit is claimed for another table.
• Quoted per order — price comes back against the colour and quantity, and origin is China.

A worn half size pod leaves two bad choices: run a block that creeps under load, or tie a purchase order to a photograph and a guess.

• One block ends a nine-number search. Nine OEM codes resolve to this pod, so a fitter holding the old block and one number stops comparing cups that look almost right.
• The height becomes a choice. 74 mm, 48 mm and 29 mm share the footprint, so a nested job with two levels is covered from one supplier file.
• Grip comes back to the small panel. A 132 x 75 mm top face puts suction back under the area a 1/2 size position is meant to hold.
• Coolant stops being the failure mode. A PF body does not rust at a coolant line, so the top face the seal sits on stays flat.
• Colour keeps the table readable. Brown standard and grey available on one size lets a mixed nest be coded by position.
• Wear parts stay a small purchase. Seal, ball valve and locating ring are separate items, so a block that still holds does not carry a full kit onto the invoice.
• Reorder repeats the first order. Price is quoted per order against the pod and colour, leaving quantity as the only number to decide the second time.

Yes, if the position you are replacing takes a 132 x 75 x 74 mm 1/2 size block. The pod is listed as a spare for Biesse Rover point-to-point processing centers; measure the old block across the top face and in height before ordering.

Nine of them. AS24M00421, AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159 and 6308A0160 all resolve to this 1/2 size block.

Measure the old block. 74 mm is this pod; 48 mm and 29 mm are the lower versions on the same footprint, so the number that comes off the old block is the number to order.

PF, phenol formaldehyde. It is a moulded phenolic block rather than cast aluminium, so it insulates, holds a flat top face and does not rust in a coolant environment.

No. They are listed as available accessories. The pod is supplied as the block, and the seal, ball valve and locating ring are ordered as separate items when the old ones are also worn.

Yes. Brown is the standard colour and grey is available on the same 132 x 75 x 74 mm size, so a brown table and a grey table can be fed from one order.

Price is quoted per order, so there is no list figure on this page. Send the OEM number, the colour and the quantity you want to replace, and the block is quoted against exactly that.

No. A vacuum block holds by suction, so the same pod is used on solid timber, MDF, composite panels and laminates; the 132 x 75 mm top face and the seal decide the grip, not the material name.