1/3 Size Vacuum Pods For Biesse CNC Machine CNC Spares Vacuum Cup 132x54x29mm

Need a 1/3 size vacuum pod that drops onto a Biesse CNC table without changing the panel height? This cup is 132 x 54 x 29 mm and covers nine Biesse reference numbers, from AS24M00425 to AS24M00421. The body is moulded PF (phenol formaldehyde plastic), a rigid thermoset, supplied in brown with grey also available. Heights of 48 mm and 74 mm are listed separately when 29 mm sits too low. Valve insert, locating ring and gasket are offered on the same order.

A pod that lets go mid-batch does more than drop one panel. It stops the nesting cycle, and the operator spends the next hour hunting for a replacement in the right length, the right width and the right height, or fits a pad that is close enough and accepts a lifted corner. Shops usually hit this three ways: the wrong size for the small stations, a soft pad that creeps under clamp load, and no reference number on the part to check before ordering.

The 132x54x29 mm 1/3 size vacuum suction cup is a replacement pod for Biesse CNC machines and answers all three. It measures 132 mm long, 54 mm across the top face and 29 mm tall, the lowest of the three heights listed, so it holds the narrow stations where a full-size cup would crowd the panel next door.

The body is moulded from PF (phenol formaldehyde plastic), a rigid thermoset rather than a soft elastomer, and comes in brown with grey also available. Nine Biesse references are covered: AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160 and AS24M00421.

Keeping the original 29 mm height keeps the panel plane where the machine expects it, so a pad change does not move the Z reference. Same height, same reference number, same cycle time: that is the part that stops the downtime.

What separates this pod from a look-alike cup of similar size.

• 1/3 footprint, 132 x 54 mm - 132 mm long and 54 mm across the top face, sized for the small stations where a full pod would foul the panel next door.
• Three heights on one listing - 29 mm as ordered here, with 48 mm and 74 mm also available for jobs that need taller support points.
• PF thermoset body - moulded phenol formaldehyde plastic holds its shape under a clamped panel instead of creeping the way a soft pad does.
• Nine Biesse references - AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160, AS24M00421.
• Brown standard, grey available - both colours on the same 132 x 54 x 29 mm body, so a mixed table stays consistent to look at.
• Direct port mounting - the pod seats on the existing vacuum port, with no adapter plate and no machining of the table.
• Station rebuild in one order - valve insert, locating ring and gasket are listed beside the cup, so a leaking station is closed out in a single delivery.
• Three material families - cabinet and furniture panels, plastics and composite sheet, the materials this pod is listed for.

When a pod fails, most shops choose between waiting for an original part and fitting a pad that is close enough. This listing is the third option.

• The right height, so the Z does not move. A 29 mm pod keeps the panel plane exactly where the machine expects it, so the first cut after the swap lands where the last one did.
• One order rebuilds the whole station. Cup, valve insert, locating ring and gasket are all listed, so a leaking pod is fixed in one delivery instead of three.
• No table work. The pod bolts onto the existing port, so there is no adapter plate, no extra joint to leak, and no re-levelling of the spoilboard.
• Stiff under clamp load. A PF thermoset body keeps its 132 x 54 mm top face flat, so the seal stays where it was set for the whole cycle.
• Check the number, not the worn pad. Match the moulded reference against the nine Biesse numbers above; measuring a compressed pad is what puts the wrong size on the table.
• Small stations stay in the cycle. The 1/3 size keeps pods on the narrow stations that a full-size cup would push out of the layout.

Nine of them. This pod is listed against AS24M00425, AS24M00246, AS24M00072, FNAW550127, FNAW550128, 1614A0118, 6308A0159, 6308A0160 and AS24M00421, so check the number on your old pod against that list before ordering.

132 x 54 x 29 mm. The length is 132 mm, the top face is 54 mm wide and the height is 29 mm, which makes it the shortest of the three heights listed.

Yes. 48 mm and 74 mm heights are also available, and 29 mm is the low-profile one on this listing, so pick the height that matches what came off the machine.

PF, phenol formaldehyde plastic. It is a moulded thermoset, so the 132 mm body stays rigid under a clamped panel instead of deforming the way a soft rubber pad does.

Wood-based panels, plastics and composite sheet. It is listed for cabinet and furniture work, for plastic parts and for composite material processing, which is where a stable pod on the small stations matters most.

Yes if the pod you are replacing carries one of the nine Biesse numbers above. Measuring the old pod to 132 x 54 x 29 mm is the second check, and the machine model settles it.

Yes. Valve insert, locating ring and gasket are offered as replacements next to the cup, so a station can be rebuilt with one order rather than three.

Contact us for a quote. Prices are quoted per order, so send the quantity, the height you need (29, 48 or 74 mm) and the part numbers your machine carries.