132x146x29mm Vacuum Block For Biesse CNC Machining Center CNC Vacuum Cup

Need a vacuum pod that actually fits the table? The 132x146x29mm vacuum block is the Bakelite pod body for Biesse Rover CNC machining centers: 132 x 146 mm across the base, 29 mm tall, 1 kg each. Brown as standard, grey also available. A locating ring and a foam strip are available with it, other sizes are available, customization is supported, and the price is quoted on request.

Three things stop a nested router, and all three start at the pod: a sealing face that has gone out of flat, a block that no longer matches the base it sits on, and a spare that was ordered in the wrong size. The first leaks vacuum, the second lets the panel move, the third arrives and does not fit. This block is sized to remove the third one, and at 1 kg it is cheap enough to keep the first two covered by one on the shelf.

The 132x146x29mm vacuum block is the Bakelite pod body that holds flat panels on a Biesse Rover CNC machining center. It measures 132 x 146 mm across the base and stands 29 mm tall, and it is one size inside a wider vacuum cup range. Brown is the standard colour and grey is also available, which matters when the pods already on the machine are coded by colour.

A locating ring and a foam strip are available as separate items, so a face that has gone out of flat can be renewed without buying a second 1 kg body. Other sizes are available and customization is supported, so a pod base that is not 132 x 146 mm is a drawing, not a dead end. Shipping is by air, by sea or by express, and the price is quoted on request.

What separates this block from a generic suction cup is the material, the three dimensions and the fact that the parts around it are supplied separately.

• Rover pod footprint - 132 x 146 mm across the base, the size that lands on the standard Biesse Rover pod positions.
• 29 mm stack height - one number to check with a caliper before a used block goes back on the table.
• Premium Bakelite body - a hard thermoset face rather than a soft rubber cup, so the sealing edge keeps its shape under vacuum.
• 1 kg per block - one hand can lift it, and the weight keeps it seated while the vacuum is pulled.
• Brown standard, grey available - the same block in two finishes, so a set can be coded by colour on the table.
• Locating ring available - the ring centres the cup in the 132 x 146 mm position instead of relying on the bolts.
• Foam strip available - renews the sealing face without replacing the 1 kg Bakelite body.
• Other sizes available - this is one size in the range; state the length, width and height you need.
• Customization supported - size, colour and accessory set can be built to the drawing you send.

A pod is a wear item. The question is not whether the face will go out of flat, but whether a replacement is on the shelf when it does.

• Fits the table you already run. No adapter plate, because the block is the 132 x 146 x 29 mm size the Rover pod base was built for.
• A spare costs one kilogram. Two blocks per pod is a few kilograms of shelf space, not a pallet you have to find room for.
• The wear parts are separate. Locating ring and foam strip are available on their own, so a leaking face is a small order, not a new block.
• Non-standard grids stop being a dead end. Customization is supported, so a size that is not 132 x 146 x 29 mm can be quoted instead of improvised.
• Colour stays consistent. Brown and grey are both available, so a top-up does not break the colour code on the table.
• Bakelite, not rubber. The face is a hard thermoset, so the sealing edge does not take a set and the body stays at 29 mm.
• Quoted against quantity. Price is on request, so the quote follows the quantity on your enquiry rather than a list figure.

Yes, if your pod base takes the 132 x 146 x 29 mm block. Measure the base of the block you are replacing - 132 x 146 mm across, 29 mm tall - and compare the three numbers before ordering, because the Rover is built with more than one pod size.

Premium Bakelite. The body is a hard thermoset rather than a soft rubber cup, and each block weighs 1 kg.

Yes, they are separate accessories. A locating ring and a foam strip are available to be provided with the block, so the body can be ordered alone or the complete set in one go.

Yes. Other sizes are available and customization is supported. Send the length, width and height you need and the block is quoted to those three numbers instead of the 132 x 146 x 29 mm standard.

Brown is the standard colour, and grey is also available. Order the same colour as the pods already on the table if they are coded that way.

1 kg. That is light enough to fit one-handed, and heavy enough to stay seated while the vacuum is pulled.

Ask for a quote. The price is given on request rather than as a list figure, so put the quantity, the size and the colour on the enquiry.

By air, by sea or by express. The channel follows the size of the order, and the most economical express company is used for small parcels.