160*115*17mm Upper Suction Plates Rubber Pads With Step For Precision CNC Machine

Need to renew the gripping face of a CNC vacuum cup without buying a new pod? The VCB411 is the upper suction plate with a step, sized 160 × 115 × 17 mm (160 mm long, 115 mm wide, 17 mm thick), moulded in rubber, supplied in grey and packed in a carton. It is the upper rubber plate of CNC vacuum cups used on HOMAG CNC drilling machines. The same 160 × 115 × 17 mm size is also made as VCB410, the no-step version. Price is quoted per order.

A shop running HOMAG CNC drilling machines meets the same three things. The upper rubber face of a vacuum cup goes flat or torn, so the panel stops being pulled down. The reflex answer is a quote for a complete cup assembly when only the rubber plate is worn. And the plate that finally arrives is the wrong version, so the step sits where it should not and the cup leaks. The VCB411 is that one part, sold on its own.

It is the upper rubber suction plate that sits on a CNC vacuum cup, 160 × 115 × 17 mm, 17 mm thick, moulded in rubber and supplied grey. Its job is the one the vacuum circuit depends on: give the panel a flat, closed contact face so the pump pulls suction across the whole 160 mm × 115 mm footprint.

What separates it from the plate beside it on the shelf is the step. This is the step version; the identical 160 × 115 × 17 mm size is also made as VCB410 without a step, for cups that take a flat plate. Plates are supplied in versions with different hole patterns, so both the step and the pattern have to match.

Packing is one carton, which keeps the rubber face flat in transit. Price is quoted per order.

What the plate is, what it measures and which version to order - one line each.

• Step version, clearly marked. VCB411 carries the step; VCB410 is the same 160 × 115 × 17 mm size without it, so the version is chosen on the cup.
• 160 × 115 × 17 mm. 160 mm long, 115 mm wide, 17 mm thick - 3 numbers to check against the old plate with a rule.
• Rubber, grey. Moulded in rubber and supplied in grey, the material and the colour listed for this item, in one piece.
• The face the panel touches. It is the top of the cup stack, the 1 part in contact with the workpiece - not the pod body or the valve.
• HOMAG CNC drilling machine usage. The stated use is the upper suction plate of the vacuum cups on HOMAG CNC drilling machines.
• Matched hole pattern. Plates come in versions with different hole patterns, so the order quotes 2 things: version and pattern.
• One part, not an assembly. The carton holds 1 rubber plate; cup body, piston and valve stay bolted to the machine.
• Carton packed. Each plate travels in a carton, holding the 17 mm thickness and the step undistorted to the machine.
• Price quoted per order. Price is per order, so plates and cups are answered in 1 reply, not 2.

When a cup stops holding, both usual answers cost more than the part: buy a complete vacuum pod, or keep running a smoothed rubber face and re-clamp panels by hand. This plate is the third answer.

• You replace a face, not a pod. Only the 160 × 115 × 17 mm rubber plate carries the wear against the panel, so the cup body, piston and valve stay on the machine.
• The version is settled before the order. VCB411 means with step and VCB410 means without, both at 160 × 115 × 17 mm, so a wrong part is caught by 1 word and 3 measurements.
• Suction returns over the whole footprint. A flat, closed 160 × 115 mm rubber face lets the pump pull across the entire plate instead of leaking past a torn edge.
• One line in the spare-parts bin. A single SKU covers the plate - 1 stock count, 1 reorder point, 1 number on the purchase order.
• No jig, no adhesive. The plate sits on the cup by its own 17 mm body and its step, so there is no machining or gluing step between the carton and the spindle.
• Quoted in one reply. Price is per order, so plates, cups and pads go out as 1 quotation with a single delivery date to confirm.

VCB411 if your cup seats a stepped plate. Both are 160 × 115 × 17 mm, rubber, grey; the only difference is the step, and VCB410 is the no-step version of the same size. Send one photo of the old plate in its cup and the version is confirmed before you order.

160 × 115 × 17 mm - 160 mm long, 115 mm wide, 17 mm thick. That is the only size this SKU is made in, so it is worth measuring the old plate with a rule before the order goes out.

Rubber, supplied in grey. Both the material and the colour are listed for this item, and the plate is moulded in one piece, so the contact face and the step are the same material.

HOMAG CNC drilling machines, on the upper suction plates of the CNC vacuum cups. That is the stated usage; on another make of machine, check the 160 × 115 × 17 mm size and the hole pattern against the old plate first.

No. This SKU is the upper rubber suction plate on its own. The cup body, piston and valve stay on the machine, which is why the carton holds a single plate rather than an assembly.

It matters. Plates are supplied in versions, each with a different hole pattern, so the pattern has to match the cup as well as the 160 × 115 × 17 mm outline. Compare the old plate hole for hole before ordering.

Price is quoted per order. Send the SKU VCB411, the version (step or no step), the quantity and the machine model, and a price for that quantity comes back in one reply.

In a carton. Each plate is packed in its own carton, which keeps the rubber face flat and the step undistorted between the warehouse and your machine.