4011110079 125*75*17 Suction Cup Cover Top Rubber Pad For CNC Vacuum Suction Cup 4-011-11-0079

Replacing a spent top pad on a Homag vacuum pod? The 4011110079 suction cup cover measures 125 × 75 × 17 mm, is moulded in rubber, and comes as the small hole version. It is the same pad catalogued as 4-011-11-0079 and 10.01.12.00011, so any of those 3 numbers on the old cover resolves to this one part. The big hole cover, 4-011-11-0196, is a separate item and also available, so check the hole before ordering. Colour grey, packed in a carton.

Three things stop a nesting table on a Homag drilling machine, and a worn top cover causes all of them: a flattened pad loses grip and the board creeps under the drill, the wrong hole version arrives because two covers share one drawing, and a whole vacuum block is ordered when only the rubber pad is spent. This cover removes the last two.

The 4011110079 suction cup cover is the top rubber pad that sits on a CNC vacuum suction block, 125 mm long, 75 mm wide and 17 mm thick. It is the small hole version, moulded in grey rubber, and listed for HOMAG CNC drilling machines and the upper suction plates of CNC router processing centres.

The part is catalogued under 3 numbers: 4011110079, 4-011-11-0079 and 10.01.12.00011, so a store can match whichever number survives on the old cover or in the parts list. The big hole cover, 4-011-11-0196, is a separate item and also available, so the hole in the old pad is checked first.

Each cover is packed in a carton and quoted at price to be negotiated, with shipping arranged per order. Brand Shunhongyu, origin China: one shelf line covering 3 cross-references, and a pod back in production for the cost of a 125×75×17 mm pad.

What a buyer checks on this cover before raising the order:

• Three numbers, one pad — 4011110079, 4-011-11-0079 and 10.01.12.00011 all identify this cover.
• Small hole version, stated up front — The hole type is in the description, and the big hole item 4-011-11-0196 is listed separately, so the 2 versions never mix on an order.
• 125 × 75 × 17 mm — Length 125 mm, width 75 mm, thickness 17 mm: the 3 figures that decide whether the pad seats on the block.
• Top cover, not the block — It is the moulded rubber top of a vacuum suction block, so the block body and its plumbing stay on the machine.
• Grey rubber — Colour is grey, body material rubber, matching the pad it replaces on the pod.
• HOMAG CNC drilling machines — The usage this cover is listed for, on the upper suction plates of the drilling machine.
• CNC router processing centres — The same pad is the replacement top rubber cover on router processing centre blocks.
• Upper suction plates — Listed as the top pad for upper suction plates, the position it is bought for most often.
• Carton packed — Orders ship in a carton, so a store refill arrives boxed rather than loose.
• Price and shipping negotiated — Price is to be negotiated and shipping is arranged per order, on 1 quotation line.

The usual choice on a dull pod is a pad that no longer holds, or a whole new suction block. This cover is the option in between.

• Replace the pad, keep the block. Only the top cover is renewed, so the block, fittings and table position stay: 1 part replaced, not an assembly.
• The hole question is settled before the order. Small hole is this line and 4-011-11-0196 is the big hole item, so the pad that arrives matches the pad removed.
• One shelf line for three numbers. 4011110079, 4-011-11-0079 and 10.01.12.00011 point at the same cover, keeping 3 catalogue entries in 1 bin.
• Quote from whichever number you have. Old invoice, parts list or the cover itself: any of the 3 references identifies this pad.
• Stock that fits in a drawer. At 125×75×17 mm it stores flat, so a spare set takes centimetres of shelf, not a pallet position.
• No fixture to remake. The pad seats on the existing suction block, so a new cover needs no re-setting of the nest: 0 new fixtures.
• Carton packing for a clean handover. Boxed in a carton, pads reach the store counted, not loose in a bag.
• Terms that follow the order size. Price is to be negotiated, shipping arranged per order: a trial pad and a store refill sit on one quotation line.

Yes, if the old pad is the 125 × 75 × 17 mm small hole cover. Those 3 dimensions and the small hole are what this item is listed as, so measure the pad and check the hole before ordering.

Look at the hole in the pad you are taking off. This line is the small hole version; the big hole cover is 4-011-11-0196 and is a separate item, also available.

Yes. 4011110079 and 4-011-11-0079 are two ways of writing the same cover, and 10.01.12.00011 is the third number it is catalogued under.

No. The pad is the top rubber cover only, so the block body and its fittings stay on the machine and 1 cover is replaced.

Rubber, in grey. Both are stated on the item, so the cover that arrives matches the colour of the pad being replaced.

125 mm long, 75 mm wide and 17 mm thick — written 125*75*17mm on the item and on the quotation, so the 3 figures can be checked against the old pad.

HOMAG CNC drilling machines, as the top rubber cover of the vacuum suction block, and on the upper suction plates of CNC router processing centres.

Price is to be negotiated, packing is a carton, and shipping is arranged per order — all 3 are confirmed on the quotation rather than assumed from the page.