Top Suction Plates For CNC Vacuum Pod 130x30x15mm Vacuum Suction Cup Cover

Need a replacement top pad for a CNC vacuum pod without buying the whole block? This plate is the one-piece top rubber cover for 130 x 30 mm vacuum pods. It replaces the top cover on Schmalz 130 x 30 x 50 L and Q vacuum pods and on Homag vacuum blocks. Rubber, gray, new. The name gives 15 mm thickness, the SKU gives 17 mm - both are in the parameter table. Nine further footprints, 120 x 50 x 17 mm up to 140 x 130 x 17 mm. Origin China, export carton, price per order.

A shop clamping small parts on a CNC pod runs into the same three things: a worn top rubber pad stops holding vacuum on a narrow rail, buying a complete pod costs more than buying one pad, and ordering that pad from the machine builder parks the machine. This plate is the single part that clears all three.

This is the top rubber plate that seats on a 130 x 30 mm pod. The listing name gives 15 mm thickness; the SKU and the OEM cross-reference give 17 mm (130 x 30 x 17 mm). It is the replacement top cover for Schmalz 130 x 30 x 50 L and Q replacement vacuum pods and for Homag vacuum blocks on CNC machining centers.

Material is rubber, color is gray, condition new. The pad is one piece, so fitting is a swap: lift the old cover off, seat the new plate in the same position, and the block is clamping again. No machining, no adapter plate, no change to the vacuum circuit.

The same pad family covers nine further footprints, from 120 x 50 x 17 mm to 140 x 130 x 17 mm, plus round pads at 109 x 54 x 18 mm and 122 x 61 x 15 mm. Origin China, standard export carton, shipped by air, sea or express; price is quoted per order.

What this 130 x 30 mm plate is, part by part:

• 130 x 30 mm pod face — seats on the 130 x 30 mm top of a CNC vacuum pod.
• 15 mm name, 17 mm SKU — the title says 130 x 30 x 15 mm, the SKU says 130 x 30 x 17 mm; both are in the table, so the old pad can be measured first.
• Rubber top cover — moulded rubber, gray, new, supplied as one replaceable piece.
• Schmalz 130 x 30 x 50 L and Q fitment — cross-referenced for those replacement vacuum pods on CNC machining centers.
• Homag vacuum block fitment — also listed for Homag CNC vacuum blocks, same 130 x 30 mm top-cover position.
• Small workpiece clamping — listed for small workpiece vacuum clamping, where the pod face is the full contact area.
• Nine further pads — 120 x 50, 125 x 75, 126 x 75, 145 x 115, 160 x 115 and 140 x 130 mm at 17 mm, plus round 109 x 54 x 18 and 122 x 61 x 15 mm.
• Pod parts around it — valve inserts, locating rings and gaskets for the same pod; Homag vacuum blocks supplied too.
• Packed for export — standard export carton, by air, by sea or by express to suit the order quantity.
• Origin China — gray, new, priced per order.

A shop with a dull pod pad normally has two moves: send the pod out and wait, or keep clamping on a pad that leaks. This plate is the third move.

• Replace the pad, keep the pod. The 130 x 30 mm top cover is the part that wears first, so the block behind it does not have to be re-bought.
• Start from the pad, not the machine. Cross-referenced to Schmalz 130 x 30 x 50 L and Q pods and to Homag vacuum blocks, so the search does not depend on the machine model plate.
• Both thicknesses printed. 15 mm in the name and 17 mm in the SKU are stated side by side, so a buyer can measure the old pad and order once.
• Small parts stay clamped. The plate is listed for small workpiece vacuum clamping, the case that fails first when the rubber face is worn.
• Nine more footprints, one carton spec. From 120 x 50 x 17 mm to 140 x 130 x 17 mm, plus round 109 x 54 x 18 mm and 122 x 61 x 15 mm.
• Quote first, ship when it suits. Price is per order and freight is chosen from air, sea or express, so a 1-pad trial and a full pod refit can both be priced.

Schmalz 130 x 30 x 50 L and Q replacement vacuum pods on CNC machining centers, plus Homag vacuum blocks. It sits in the top-cover position on a 130 x 30 mm pod face.

Both are listed, and the difference is in the naming. The product name and the page title say 15 mm; the SKU and the OEM cross-reference say 17 mm (130 x 30 x 17 mm). Measure the old pad before ordering and quote the SKU.

No. This is the replacement top rubber cover only. The pod body, valve insert, locating ring and gasket stay where they are unless they are damaged as well.

Rubber, in gray, supplied new. It is a one-piece moulded top plate, not a two-part assembly.

Yes, that is the job it is listed for. Small workpiece vacuum clamping on CNC machining centers is exactly where a 130 x 30 mm pod face is the full contact area.

Nine more. Rectangular pads at 130 x 30, 120 x 50, 125 x 75, 126 x 75, 145 x 115, 160 x 115 and 140 x 130 mm with 17 mm thickness, and round pads at Ø109 x 54 x 18 mm and Ø122 x 61 x 15 mm.

Standard export carton, then by air, by sea or by express. The method is chosen to suit the order quantity, and freight is confirmed once the destination is known.

Send the SKU or the size and the quantity, and the price is quoted per order. The page price field is a quote request, because pad price moves with quantity and shipping method.