132*75*48MM Brown CNC Vacuum Cups Biesse Cnc Router Vacuum Pods Half Size

Need a half size replacement suction cup for a Biesse Rover table? This one is 132 x 75 x 48 mm, brown, in rubber, plastic and steel, and it replaces the vacuum pod on Biesse Rover routers and Biesse Point to Point machines. The 48 mm body raises the workpiece off the flat grid, so solid wood edges and edge detail stay open to the cutter. Gasket, valve insert and locating ring are supplied as separate replacement items. Full size and 1/3 size bodies, plus 29 mm and 74 mm heights, are also available.

A router table that stops for one worn suction cup costs a shift, not a part. Shops running a Biesse Rover keep meeting the same three things: a pod that does not match the footprint of the part, a rubber gasket that fails while the body behind it is still sound, and a replacement that only moves through the machine maker's own channel.

This is that replacement: a 132 x 75 mm suction pod, 48 mm high, brown, in rubber, plastic and steel, for the flat grid of Biesse Rover routers and Biesse Point to Point machines.

The 48 mm body raises the material off the table, which is what opens solid wood edges and edge detail to the cutter instead of letting the tool run into the grid. Large parts run on the open top face; for a small part, gasket sections the grid off around it, so vacuum is not lost through unused area.

Wear is separated from the body: gasket, valve insert and locating ring come as replacement items, so the plastic and steel body outlasts the rubber on its face. Heights of 29 mm and 74 mm, plus full size and 1/3 size bodies, are also available.

Footprint, height, size family and what can be changed when the rubber goes decide whether a cup holds a part flat.

• Biesse Rover fit — listed for the flat grid of Biesse Rover routers and Biesse Point to Point machines.
• 132 x 75 mm top face — half size footprint, so a rail or a small panel gets vacuum over its own area.
• 48 mm working height — lifts the workpiece clear of the table, which is what makes edge detail possible on a flat grid.
• Three heights — 29 mm, 48 mm and 74 mm, picked to the part thickness rather than padded out on the table.
• Three sizes — full size, half size and 1/3 size, so one order covers a panel job and a rail job.
• Separate wear parts — gasket, valve insert and locating ring each come as a replacement item.
• Sectioned vacuum — gasket shuts off grid the workpiece does not cover, so vacuum is not wasted on open table.
• Rubber, plastic and steel — the three materials listed for this cup, named for the part that seals and the part that carries load.
• Hand fitting — the cup goes onto the flat surface and releases by hand, so a job change is a cup swap.

The usual choice is waiting on a maker's parts channel, or rebuilding a fixture around whatever cup is on the shelf. Neither is needed here.

• Buy the cup, not the pod. Gasket, valve insert and locating ring are separate, so a worn rubber costs one part, not a 48 mm body.
• Half the footprint, all the vacuum. At 132 x 75 mm the top face closes in on a narrow part, not a wide open grid.
• Edge work off the surface. The 48 mm height lifts material clear of the table, so a cutter reaches edge detail.
• Changeover in minutes. Hand fitting makes a job change a cup swap rather than a fixture rebuild, so a 10 piece run still pays.
• One shelf, three heights. 29 mm, 48 mm and 74 mm are available, so thin panels and thick blocks are covered.
• Repair stops at the rubber. Valve insert, locating ring and gasket are replaced on their own, so the body keeps working.
• One order for a mixed shop. Homag vacuum blocks are offered alongside these Biesse cups, so two brands are filled from one place.
• Quote in one message. Give the quantity and the destination, and price and freight come back together, by air, by sea or by express.

Yes, if your table is a Biesse Rover router or a Biesse Point to Point machine. The cup is listed for the flat grid of those machines, with a 132 x 75 mm top face and a 48 mm body. Send a photo of the pod position on your table and we will check this part against it before you order.

Half size. The top face measures 132 x 75 mm and the body is 48 mm high; full size and 1/3 size bodies are also available, and the other two heights are 29 mm and 74 mm.

No. Gasket, valve insert and locating ring are supplied as separate replacement items, so the plastic and steel body stays on the table and only the worn part is changed.

Three: 29 mm, 48 mm and 74 mm. This listing is the 48 mm; say which height your job needs when you ask for a quote.

Yes. Run large parts on the open top face, or section the grid off with gasket when the part is small, so vacuum is not lost through the area the workpiece does not cover.

Rubber, plastic and steel. Those are the three materials listed for this part.

Yes. The 48 mm height raises the material off the table, which is what opens the edge of a workpiece to the cutter on a flat grid.

Send the quantity and the destination. The price comes by quote, freight is updated once the destination is known, and shipping goes by air, by sea or by express.