CNC Routers Cnc Suction Cups Biesse Vacuum Suction Cup 132x75x74mm Brown Grey AS24M00421

Replacing a tired cup on a Biesse Rover console is a part order, not a machine order: this is the full-size 132 x 75 x 74 mm cup, part number AS24M00421. Top face 132 x 75 mm, height 74 mm, plastic body with a rubber sealing face and a steel insert, in brown or black, bulk packed. It is built to the same 74 mm height as the half size and 1/3 size cups, so the three can be mixed on one table and unused fixture positions are simply capped off.

A console table loses money in three quiet ways: a cup that stops sealing and lets the panel creep mid-cut, a replacement picked off a photo that arrives with the wrong footprint, and the machine standing idle while somebody works out whether the old cup was 74 or 75 mm. This cup answers all three.

The AS24M00421 is a Biesse vacuum suction cup, catalogued as a vacuum block at 132 x 75 x 74 mm: top face 132 x 75 mm, body height 74 mm, the full-size cup of the Biesse Rover console family. Half size and 1/3 size are built to the same heights, 29 mm, 48 mm and 74 mm. Plastic body, rubber sealing face, steel insert.

Inside sits a valve that only releases suction when a workpiece is placed on it, which is what keeps changeover quick: consoles a nest does not need stay on the machine, and an unoccupied fixture is closed with a dummy cap that shuts the vacuum there and keeps dust and swarf out.

Fitting is a screwdriver job, with no special tooling, and 132 x 75 mm of footprint is small enough to ship cheaply. Cups are bulk packed, in brown or black, and quoted per order.

Nine points decide whether a cup fits a console position, each taken off the size block.

• Full-size 132 x 75 mm top face — the footprint that has to line up with the position, printed before the order rather than measured off a photo.
• Height 74 mm — the second matching number; the family is built at 29, 48 and 74 mm, so height comes off a list, not a guess.
• Plastic, rubber and steel — body, sealing face and fixing insert, so one part covers three jobs.
• Valve opens only under load — suction is released when a workpiece is placed, so an empty position is not pulling air.
• Dummy cap for unused fixtures — shuts the vacuum at that position and keeps dust and chips out between jobs.
• Full, half and 1/3 size combine — all three come in the same heights, so one table can run mixed sizes.
• Brown or black — colour is a line on the order, not what happens to be on the shelf.
• Screwdriver fitting — no press, no special tooling; a cup comes off and goes back at the table.
• Small and light — 132 x 75 x 74 mm keeps freight and shelf space low, and bulk packing keeps the unit cost down.

The question on a console table is never which cup to buy; it is how long the nest stands still while a seal is sorted.

• One cup ends the search. AS24M00421 with 132 x 75 x 74 mm resolves to one part, so a fitter stops hunting photos of cups that look almost right.
• A mixed nest keeps working. Full, half and 1/3 size share the 29 / 48 / 74 mm heights, so a big cup goes where panel area is, a small one where it is not.
• Wasted vacuum stops at the empty position. The valve only opens under a workpiece and the dummy cap shuts the fixture, so a half-loaded console is not bleeding air.
• Changeover is minutes. Consoles the nest does not need stay bolted to the machine; the operator caps the empties and gets to the panel.
• A swap does not move the pad line. Another 74 mm cup keeps the same height at that position, so the rest of the setup stays where it was.
• Cheap to keep two on the shelf. 132 x 75 x 74 mm is small, freight is low and packing is bulk, so a spare pair costs little.
• One number to quote and reorder. The part number ties colour, height and footprint together, which makes the second order identical to the first.

Yes, if the position takes a full-size cup with a 132 x 75 mm top face and a 74 mm height. The cup is part AS24M00421 and is listed for Biesse Rover CNC routers and NC machines; send a photo of the position you are replacing and the size is confirmed before it ships.

The whole cup. One part number covers the assembled 132 x 75 x 74 mm unit — plastic body, rubber sealing face and steel insert — not a loose pad, so it goes onto the console as it arrives.

The vacuum stays shut. The cup carries a valve that only releases suction when a workpiece is placed on it, and unoccupied fixtures are closed with a dummy cap that shuts the vacuum in that position and keeps dust and swarf out.

Yes. All three sizes are offered in the same three heights, 29 mm, 48 mm and 74 mm, so they can be combined at will on the same console layout without changing the bed height of any position.

74 mm is the height of this cup. The 75 in the data sheet belongs to the 132 x 75 mm top size, and the family heights are 29 mm, 48 mm and 74 mm; order by part number and the height is not in question.

No special tooling. The cup is fixed with a screw, so a screwdriver takes it off and puts the replacement back, in seconds, with the console still on the machine.

You choose. The cup is supplied in brown and in black, so the colour is fixed on the order; state it next to part number AS24M00421 and the two are interchangeable on the machine.

Bulk packed, quoted per order, shipped by air, by sea or by express. Send the quantity, the colour, the machine model and part AS24M00421 and the quotation comes back against this exact 132 x 75 x 74 mm cup.