132x146x74mm Brown Grey CNC Vacuum Cups CNC Routers Biesse Vacuum Pods Vakum CNC

Need a replacement suction cup for a Biesse Rover pod and rail table? This 132 x 146 mm brown grey CNC vacuum cup drops into the fixture you already have: no adapter plate, no table re-drilling. Top face 132 x 146 mm, height 74 mm, grating in 15° steps for angled positioning. Gasket, valve insert and locating ring are separate replacement items, so a sound body is not scrapped with its rubber. Full size, half size and 1/3 size bodies come in 29 mm, 48 mm and 74 mm heights.

A nested router that stops for a worn suction cup costs a shift, not a part. Shops running a Biesse Rover meet the same three things: a pod height that does not fit the job, a rubber gasket that dies while the body behind it is still sound, and a replacement that only comes through the machine maker's own channel.

This is a 132 x 146 mm suction cup, 74 mm tall, in brown and grey, for the pod and rail table of Biesse Rover and Biesse Point to Point machining centres. The base body inserts into the existing holding fixture, and that fixture is divided into 15° steps, so the cup turns to a set angle instead of sitting flat in one place.

Wear parts are separate: gasket, valve insert and locating ring are all supplied as replacements, so a 74 mm body outlasts its rubber. Large parts run on the full cup; smaller ones are sectioned off with gasket on the same grid.

Fitting is by hand and takes seconds, so a job change costs about a pod swap rather than a fixture rebuild. Bodies come in full size, half size and 1/3 size, in 29 mm, 48 mm and 74 mm heights, and AS24M00423 is available too.

Footprint, height, angle steps and what can be replaced when the rubber goes decide whether a cup holds a panel flat.

• Biesse Rover fit — the base body is shaped for the standard pod and rail holding fixture, so it goes into the table you run, no adapter plate.
• 132 x 146 mm top face — full size footprint on the grid, in the same family as the 29 / 48 / 74 mm heights.
• 74 mm working height — lifts the workpiece clear of the surface, which makes edge detail and solid wood work possible on a flat grid.
• 15° angle grating — the fixture divides a full turn into step positions, so the cup is set at a known angle.
• Three heights, three footprints — 29 mm, 48 mm and 74 mm bodies in full, half and 1/3 size, picked to suit the part.
• Separate wear parts — gasket, valve insert and locating ring each come as a replacement item, so repair is a rubber change.
• Hand mounting — the cup attaches to a flat surface and releases in seconds, with no special fixturing between.
• Second reference — AS24M00423 is offered alongside this cup, so one order serves a parts list written with either number.

The usual choice is waiting on a maker's parts channel or rebuilding a fixture around whatever cup is on the shelf. Neither is needed here.

• Buy the cup, not the pod. With gasket, valve insert and locating ring as separate items, a worn rubber costs one small part, not a 74 mm body.
• One order covers the table. 29 mm, 48 mm and 74 mm bodies in full, half and 1/3 size let you stock the heights your jobs use.
• Changeover in seconds. Hand fitting makes a job change cost about one cup swap, so a run of 10 parts still pays.
• Angles without a new fixture. The 15° grating gives repeatable positions around the pod, so an angled setup is dialled.
• Small parts on a big table. Gasket sectioning shuts off unused grid area, so the same 132 x 146 mm cup holds a narrow rail or a panel.
• Edge work off the surface. The 74 mm height lifts the part clear of the table, so a cutter reaches edge detail without touching the grid.
• Fits what is on the floor. The 132 x 146 mm footprint is the full size of this table family, so old and new pods line up in one set.
• Quote in one message. Give quantity and destination, and price and freight return together, by air, by sea or by express.

Yes, if your table uses the standard pod and rail holding fixture. The body is 132 x 146 mm at the top and 74 mm high and inserts into that fixture the same way the original cup does. If your fixture is a different pattern, send a photo of the pod base and we will check it before you order.

No. Gasket, valve insert and locating ring are all supplied as separate replacement items, so the 74 mm body stays on the table and only the worn part is changed.

Three heights (29 mm, 48 mm, 74 mm) in three footprints (full size, half size, 1/3 size). The three heights exist so you can match the part thickness instead of padding the table.

By turning the body in the fixture. The holding fixture grating is divided into 15° steps, so the cup sits at fixed increments around a full turn rather than at an eyeballed angle.

Yes. Use the full cup for large panels, or section the grid off with gasket when the part is small, so vacuum is not lost through open grid area.

It is a second reference that is also available from us. If your parts list shows AS24M00423, quote that number when you ask and we will confirm it against this 132 x 146 x 74 mm cup.

Send the quantity and the destination. The price comes by quote, and freight is updated once the destination is known; shipping goes by air, by sea or by express, chosen to suit the order quantity.

Seconds per cup. It attaches to a flat surface by hand and releases again the same way, so a full table change is minutes of work, not a fixture rebuild.