Machining Centers CNC Vacuum Cups 130x30x50 Q Replacement Vacuum Pods For CNC

Tired of narrow boards sliding because the pod under them no longer seals? The VCB305 is the direct replacement: a 130 x 30 mm top plate, 50 mm height, crossways arrangement, art 10.01.12.00646, built as a Schmalz VCEL-K2 130x30x50 Q equivalent for 1-circuit console tables. It arrives as a complete block, and its three wear parts — upper friction plate 10.01.12.00805, sealing frame 10.01.12.00804, bottom suction plate 10.01.12.00228 — can be reordered on their own. Price on request.

A pod and rail table only clamps what its pods can seal. Three things go wrong most often: a narrow rail or offcut slides because the block under it has lost its grip, one torn rubber lip writes off a block that is otherwise sound, and the replacement that finally arrives has a different footprint than the console position it has to sit in. This block is built around those three failures.

It is a 130 x 30 mm top plate, 50 mm high vacuum block with a crossways arrangement, in the 1-circuit console format pod and rail tables use. Bottom rubber pad is 140 x 115 mm. It is listed as the replacement for the Schmalz VCEL-K2 130x30x50 Q block, art 10.01.12.00646, and it carries the same use as 10.01.12.00379.

It ships as a complete suction cup, and the three parts that actually wear are stocked on their own: upper friction plate 10.01.12.00805, sealing frame 10.01.12.00804 and bottom suction plate 10.01.12.00228. A worn lip therefore costs one pad, not a whole block. The 130 x 30 x 50 L layout is available separately.

Fit covers the German and Italian machining centres on pod and rail tables: Homag, Weeke, Felder, Masterwood, Busellato, Biesse, Format4 and IMA, plus HolzHer machines that take OEM 2760258. Shipping is by air, by sea or by express. Price is quoted per enquiry.

One art number, one complete block, three wear pads you can reorder on their own.

• Top plate 130 x 30 mm, height 50 mm. The two numbers that decide whether a block sits flat on a rail console are fixed before ordering.
• Crossways arrangement. The sealing face runs across the rail, the orientation the 130x30x50 Q console position takes.
• 1-circuit console format. One vacuum circuit per block, the layout pod and rail tables are built around.
• Three replaceable wear parts. Upper friction plate 10.01.12.00805, sealing frame 10.01.12.00804, bottom suction plate 10.01.12.00228.
• Bottom rubber pad 140 x 115 mm. The base is wider than the 130 x 30 mm top plate, so vacuum is spread over the console face.
• 30 mm narrow face. Reaches boards a 75 mm or 130 mm wide pod cannot clamp, which is what narrow rails need.
• Complete block, one art number. Top plate, sealing frame and bottom plate ship together under 10.01.12.00646.
• Equivalent to 10.01.12.00379. Same use, so a spares list already carrying that number needs no second line.
• L layout available. The same block comes as 130 x 30 x 50 L where a console position runs lengthways.
• Fit list covering 8 machine names. Homag, Weeke, Felder, Masterwood, Busellato, Biesse, Format4, IMA, plus HolzHer OEM 2760258.

The real choice is not brand against brand; it is whether a tired block gets re-padded or bought again, and how long the table stands idle while you decide.

• Re-pad instead of re-buy. Three pads on the block each carry their own art number, so a torn lip costs one pad and the body stays in service.
• Same footprint as the block you pull off. 130 x 30 mm at 50 mm height means the console positions do not have to be re-set after a swap.
• Narrow boards stop moving. A 30 mm face is what reaches a narrow rail, so offcuts that shifted under a wide pod now hold.
• One number on the purchase order. The complete block ships under 10.01.12.00646, so body and pads are always the same generation.
• Mixed-brand floor, one spares list. Homag, Weeke, Biesse and IMA consoles take the same family of blocks, so one list covers the cell.
• Fit confirmed before the clamp closes. Footprint, height and arrangement are all stated, so a fitter can check the position instead of guessing.
• Fewer wrong-fit returns. The 130 x 30 mm plate is stated in the title, the table and the part number, so the wrong size is filtered out at enquiry.

Yes, if the console position takes a 130 x 30 mm top plate at 50 mm height. The block is listed as the replacement for the Schmalz VCEL-K2 130x30x50 Q, art 10.01.12.00646.

The whole block. It ships as a complete suction cup: upper friction plate, sealing frame and bottom suction plate.

Yes. All three carry their own number: upper friction plate 10.01.12.00805, sealing frame 10.01.12.00804, bottom suction plate 10.01.12.00228.

Nothing, they are the same block. VCB305 is the model code and 10.01.12.00646 is the art number to put on the order.

The Q version, crossways. The 130 x 30 x 50 L layout is a separate item if your console position runs lengthways.

Narrow strips. The top plate is 130 x 30 mm at 50 mm height, so it fits a 30 mm wide rail where a 75 mm or 130 mm pod would overhang the panel edge.

Yes. It is listed as the replacement for HolzHer OEM 2760258 as well as for the Schmalz 130x30x50 Q block.

By air, by sea or by express, chosen per order, and the price is quoted per enquiry. Send the quantity and the destination and both come back together.