2-056-17-0930 125x75x100 CNC Vacuum Cups Cnc Vacuum Pods 2056170930 SUCTION CUP

Need a 125 x 75 x 100 mm vacuum block that drops straight onto a pod-and-rail table? The 2-056-17-0930 is that block. It is the VCBL-K2 125*75*100 type, ordered as 2056170930 or as Art-No 10.01.12.00447, gray, with the top plate facing crosswise. Height is 100 mm and the footprint is 125 x 75 mm. It ships as a complete set with the top rubber pad and the bottom vacuum pad fitted, and it is listed for Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato and Format 4 console tables.

A pod-and-rail table is only as accurate as the block standing on it. Shops running woodworking CNC machining centres meet three problems: a sealing pad gone hard that lets a panel creep mid-cut, a replacement block at the wrong height so the console table has to be levelled again, and a pod that arrives as a bare body, leaving the machine down while a second order ships. The 2-056-17-0930 closes the three.

It is a vacuum block measuring 125 x 75 x 100 mm, ordered as 2-056-17-0930, as 2056170930, or as Art-No 10.01.12.00447. The type is VCBL-K2 125*75*100, the colour is gray, and the top plate faces crosswise. It clamps workpieces on the pod-and-rail console tables of woodworking CNC machining centres.

Height decides the swap. 100 mm carries the sealing face to the height the rail was levelled for, so a block exchange does not send you back to re-tram the table. The 125 x 75 mm footprint gives 9,375 mm2 of clamping face, listed for Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato and Format 4 tables.

Each block ships as a complete set with the top rubber pad and bottom vacuum pad fitted, so nothing else has to be ordered. Both pads are also listed on their own for later wear. Price is quoted on request; shipping is by air, sea or express, matched to the order quantity.

What the three dimensions and the pad set decide:

• 125 x 75 x 100 mm envelope — the footprint and height of the VCBL-K2 block, so the old block is measured against three numbers before ordering.
• 100 mm working height — sets where the sealing face meets the panel, so a swap does not send the rail back to be levelled.
• Crosswise top plate — the sealing face runs across the 125 mm width, the orientation the console table clamps against.
• 9,375 mm2 of clamping face — the 125 x 75 mm top plate that sits against the panel under vacuum.
• Complete set out of the box — body, top rubber pad and bottom vacuum pad arrive fitted, so no part of the pod is on back order.
• Replaceable pads — top rubber pads and bottom vacuum pads are listed separately, so worn rubber is a one-part fix instead of a new block.
• Nine console table brands — listed for Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato and Format 4 tables.
• Three numbers, one block — 2-056-17-0930, 2056170930 and Art-No 10.01.12.00447 all resolve to the same VCBL-K2 125*75*100 body.
• Gray body — a block stained with glue and dust reads as used against a new one at a glance.
• Shipping to suit the order — air, sea or express, so a few blocks do not wait for a container.

On a worn pod the usual choice is an original part with a long lead time or a cheap cup that does not stand at the right height. This block takes that choice away.

• The table runs again the same shift. Body, top pad and bottom pad arrive assembled at 100 mm, so one block restores the sealing face without a second order or a re-levelling job.
• Wear costs a pad, not a block. The top rubber pad and the bottom vacuum pad are both replaceable on their own, so the part that actually wears is the only part bought again.
• One part number, three ways buyers search. 2-056-17-0930, 2056170930 and Art-No 10.01.12.00447 are the same VCBL-K2 125*75*100 block, which lowers the risk of a wrong-part repeat order.
• It fits the table already on the floor. The 125 x 75 mm footprint and 100 mm height are listed against nine console table brands, so an existing pod set is topped up rather than replaced.
• Pads are ordered with the block. Top rubber pads and bottom vacuum pads for the same pods come from the same range, so a rebuild is one enquiry instead of three purchase orders.
• Freight matched to the quantity. Air, sea or express is chosen to the order size, so a handful of blocks moves as fast as the machine needs them.

Yes, if the block coming out measures 125 x 75 x 100 mm. It is a VCBL-K2 125*75*100 block listed for Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato and Format 4 pod-and-rail console tables, so the three dimensions are the only check needed before ordering.

Yes. 2-056-17-0930, 2056170930 and Art-No 10.01.12.00447 are the same VCBL-K2 125*75*100 vacuum block, so any of the three can be quoted from.

Yes, it ships as a complete set. The top rubber pad and the bottom vacuum pad are fitted to the body, so the block goes onto the rail without anything else being ordered.

Yes. Top rubber pads and bottom vacuum pads are supplied as replacements on their own, so a worn sealing face is repaired with the pad rather than a whole new block.

Because 100 mm is the height the console table was levelled for. A block that stands shorter or taller moves the sealing face away from that reference, and the panel is then machined off the height the program assumes.

Crosswise. The sealing face runs across the 125 mm width rather than along the 75 mm side, which is how this VCBL-K2 block sits on a pod-and-rail table.

Quoted on request, shipped by air, by sea or by express. The price is given per order rather than listed, and the shipping method follows the order quantity, with freight confirmed once the destination is known.

Size and quantity: 125 x 75 x 100 mm, the number of blocks, the machine model and the destination. With those four items the reply covers the block and the freight in one message.