4-011-11-0367 10.01.12.00210 CNC Vacuum Cups Rubber Plastic Weeke Vacuum Pods 140*115*50mm

Losing hold on a Weeke or Homag pod-and-rail table? This is the 10.01.12.00210 pod, also sold as 4-011-11-0367, 4011110367 and VCB307: a 140 x 115 x 50 mm gray rubber-and-plastic cup for a 1-circuit console, top direction lengthwise. The 140 x 115 mm face is the sealing area and 50 mm is the height the panel rides above the table. Top pads 4-011-11-0077 and 10.01.12.00488, bottom pad 10.01.12.00228 come separately, so a worn face is a pad change rather than a new pod. MOQ 10 pcs, carton packed, price on request.

A vacuum pod rarely fails all at once. The rubber face goes slick, the panel creeps a fraction of a millimetre under the drill, and the batch is scrap before anyone hears a difference. Two more costs follow: buying a whole pod when only the top pad is dead, and fitting one whose height is a couple of millimetres off. The 10.01.12.00210 pod is the part for shops where all three keep happening on the console table.

It is a 140 x 115 x 50 mm vacuum cup in gray rubber and plastic, type VCBL-K1 140 x 115 x 50, for a 1-circuit console, top direction lengthwise. The 140 x 115 mm top face is the sealing area; 50 mm is the height the panel rides above the table. One pod carries three numbers — 10.01.12.00210, 4-011-11-0367 and 4011110367 — plus the short model number VCB307, supplied as a complete set.

It seats on pod-and-rail console tables: Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato and Format 4 machining centres are the ones this listing names — hold the workpiece down and it machines without moving.

Wear parts are stocked separately: top rubber pads 4-011-11-0077 and 10.01.12.00488, and bottom vacuum pad 10.01.12.00228, so the soft faces are renewed and the body kept. Minimum order 10 pcs, cartons, price to be negotiated.

What the 140 x 115 x 50 mm pod gives you at the table:

• 140 x 115 mm top face — the sealing area that meets the panel, with four cross-shaped pads moulded into it to carry the workpiece.
• 50 mm height — the same height as the pods either side of it, so a row of blocks sits level on the console.
• 1-circuit console fit — the single-circuit vacuum supply used on pod-and-rail tables, not the 2-circuit console.
• Lengthwise top direction — the 140 mm side runs along the rail; turn a pod across the rail and the sealing pattern no longer lines up.
• Three numbers, one pod — 10.01.12.00210, 4-011-11-0367 and 4011110367 are the same part, with VCB307 as the short model number.
• Rubber and plastic body — a soft rubber sealing face over a rigid plastic body, gray as shown in the photographs.
• Renewable top pads — 4-011-11-0077 and 10.01.12.00488 replace the wear face on its own, without buying the pod again.
• Renewable bottom pad — 10.01.12.00228 renews the face that seals the pod to the console plate.
• Supplied as a complete set — 10 pcs to the carton, one part number to quote, price on request.

When a pod lets go mid-batch there are two bad answers — stop the job, or run the panel on a block that does not match. This is the third:

• The table is back on shift, not next week. One pod on the shelf is one console position holding again the same day, instead of a batch waiting on a delivery.
• Buy the pad, not the pod. 4-011-11-0077, 10.01.12.00488 and 10.01.12.00228 are separate items, so a dead rubber face costs a pad, and the body keeps its number.
• One spare covers a row of machines. Nine machine families — Homag, Weeke, IMA, Masterwood, Felder, Holz-Her, Reichenbacher, Busellato, Format 4 — are served by the same 10.01.12.00210.
• Height errors stop at the order. Three figures decide the fit: 140 mm across, 115 mm along, 50 mm in height. Send those and the machine model, and the pod is confirmed before it ships.
• Order by number, not by photograph. The colour is gray as shown; the fit is set by 10.01.12.00210 and 140 x 115 x 50 mm, so the shade on a screen does not change the part.
• Small quantity, real carton. 10 pcs minimum, packed in cartons, so a shop can restock one row without carrying a pallet of rubber.

Yes, if the position takes a 140 x 115 x 50 mm pod on a 1-circuit console. Measure the old block — 140 mm across, 115 mm along, 50 mm in height — and send the machine model with those three numbers; that is enough to confirm before the order.

Yes — one pod, written three ways. 10.01.12.00210 is the dotted article number, 4-011-11-0367 the grouped form and 4011110367 the same digits without separators, so any of them orders the same item.

No. The soft faces are separate items: top pads 4-011-11-0077 and 10.01.12.00488, bottom pad 10.01.12.00228. A slick or torn face is replaced on its own and the body stays on the table.

It is the short model number for this pod — the same part as 10.01.12.00210. Quote either one, though the article number is the safer of the two when a stores list is being matched.

Lengthwise — the 140 mm side runs along the rail of the console table. Fit it across the rail and the sealing pattern no longer sits over the vacuum port.

It is a 1-circuit pod, type VCBL-K1 140 x 115 x 50. Fitting it to a 2-circuit console leaves one circuit with nothing to seal against, which shows up as a panel that lets go as soon as the cut loads up.

Three numbers, taken off the old block: 140 mm across the top, 115 mm along the side, 50 mm in height. If any of them reads differently, say so on the enquiry — the answer comes back as the correct article number.

10 pcs, packed in cartons. Price is to be negotiated, so send the quantity and the machine model; shipping is quoted with the order, by air, sea or express depending on the quantity.