125x75x50mm Gray Vacuumpods CNC Vacuum Pods For Cnc Router

Replacing a VCBL-K1 125x75x50 Q pod on a pod and rail table does not have to wait on an OEM confirmation. Art. 10.01.12.00211, model VCB303, is a grey 125 x 75 mm top plate on a 50 mm body, crossways top direction, 1-circuit console, plastic body with rubber sealing faces, shipped as a complete set for Homag, Weeke, IMA, Masterwood, Felder, Holz-Her and Reichenbacher console tables. Wear parts 4-011-11-0079, 10.01.12.00011 and 10.01.12.00228 reorder on their own. Lead time 1 to 7 work days.

A pod and rail table only pays while the pods on it still seal. Three failures cause most idle time: a worn top pad that stops holding vacuum on a narrow part, a pod that arrives with the wrong 125 x 75 mm footprint for its console position, and a part number an OEM takes weeks to confirm. The 10.01.12.00211 pod is built around those three.

It is a grey 125 x 75 x 50 mm vacuum pod: a 125 x 75 mm top plate on a 50 mm body, crossways top direction, plastic body with rubber sealing faces. Crossways is the point of the Q version — the pad's long axis turns across the rail, so it grips a narrow strip instead of overhanging a panel edge.

It is a 1-circuit console pod for PTP machining centres with a pod and rail table, listed as the replacement for the VCBL-K1 125x75x50 Q. Fit covers Homag, Weeke, IMA, Masterwood, Felder, Holz-Her and Reichenbacher. It ships as a complete set under one art number, so body and pads arrive as the same generation.

Wear is handled at pad level. Top pads 4-011-11-0079 and 10.01.12.00011, bottom pad 10.01.12.00228, are stocked separately, so a dulled lip costs one pad rather than a whole pod. Origin China, lead time 1 to 7 work days, shipped by air, by sea or by express.

One art number, one complete pod, three wear parts you can reorder alone.

• Complete set, one art number — body, top pad and bottom pad ship together under 10.01.12.00211, so a changeover is one order line.
• Top plate 125 x 75 mm, 50 mm height — the two numbers that decide whether the pod sits flat are fixed before ordering, not read off a photo.
• Crossways, Q version — the pad's long axis turns across the rail, the layout for clamping narrow parts on a 1-circuit table.
• Rubber faces on a plastic body — rubber seals, plastic carries the 50 mm height, finished grey.
• Three reorderable wear parts — top pads 4-011-11-0079 and 10.01.12.00011, bottom pad 10.01.12.00228, each its own item.
• Narrow 125 x 75 mm footprint — fits a short rail, where a 140 x 115 mm pod would run past the panel edge and clamp air.
• Grey, so mixed sizes stay sorted — one colour across the family keeps a 125 x 75 mm unit out of a 140 x 115 mm position.
• Seven-brand fit list — Homag, Weeke, IMA, Masterwood, Felder, Holz-Her and Reichenbacher PTP centres.
• 1 to 7 work days — stocked as a standard item, shipped by air, by sea or by express.

The choice on a pod and rail table is rarely brand against brand. It is whether a stopped pod gets re-padded or scrapped, and how many shifts the table sits idle.

• Re-pad instead of re-buy. Two pads carry the vacuum and each has its own number, so a worn lip costs one pad while the 50 mm body stays put.
• Same footprint as the pod you pull. A 125 x 75 mm plate at 50 mm height means console positions need no re-setting after the swap.
• Crossways for narrow parts. On a narrow rail the crossways pad holds the strip that a lengthways block would overhang.
• One line on the purchase order. The complete set ships under 10.01.12.00211, so body and pads are always the same generation.
• Mixed-brand floor, one spares list. Seven console brands in the fit list take this family, so one list covers the cell.
• Downtime in days. 1 to 7 work days before the freight leg, not weeks waiting on an OEM confirmation.
• Fewer wrong-fit returns. Footprint, height, direction and circuit count are all stated, so a fitter can check before the clamp closes.
• Pads priced as pads. Three wear-part numbers keep the consumable budget on the rubber, not the whole pod.

Yes, if your console runs 1-circuit pods with a 125 x 75 mm top plate. The pod is listed as the replacement for the VCBL-K1 125x75x50 Q and carries the same 125 x 75 mm plate at 50 mm height. Check the plate size against the pod you are pulling off before ordering.

The whole pod. It ships as a complete set with the plastic body, the top rubber pad and the bottom vacuum pad, and the art number covers all three parts.

Yes. The wear parts are separate items: top rubber pads 4-011-11-0079 and 10.01.12.00011, bottom vacuum pad 10.01.12.00228. Quote the pad number and the pod stays where it is.

Nothing, they are the same pod. VCB303 is our model code and 10.01.12.00211 is the art number to put on the order, and the Q suffix is the crossways version.

No, this one is already crossways. The top direction is turned across the rail, which is what you want for a narrow part on a 1-circuit console table.

A plastic body with rubber sealing pads. The rubber does the sealing, the plastic body carries the 50 mm height, and the finished part is grey.

1 to 7 work days for the goods, then the freight leg. The pod is a stocked standard item, so the clock starts on confirmation rather than on a production slot.

Price is quoted per order, not listed. Send the quantity and the destination and both the quote and the shipping choice — air, sea or express — come back together.