6308A0160 Vacuum Clamping Block for Biesse CNC Machine 132x54x48mm Vacuum Cup

The 6308A0160 vacuum clamping block is a brown replacement vacuum cup for Biesse Rover CNC machines. It measures 132x54x48mm and sits in the 48mm height series, so it is a 1/3 vacuum pod. It securely fixes the workpiece on the machine table. To confirm fit, check your machine's vacuum pod height and mounting pattern against the 132x54x48mm dimensions and the 6308A0160 part number. Customization is supported.

When a vacuum cup loses its edge, the workpiece shifts under the cutter and scrap marks start showing up. The 6308A0160 addresses that wear point on Biesse Rover tables: a brown vacuum clamping block that holds the workpiece down through the cut. Replace it when holding force drops or the cup no longer sits flat.

This is a vacuum clamping block sized 132x54x48mm, part number 6308A0160. It belongs to the 48mm height series, known as 1/3 vacuum pods. It fits Biesse Rover vacuum replacement positions. To confirm fit, compare the 132x54x48mm dimensions and the 6308A0160 number with the cup you are removing.

Mounting starts at the base: the block locates on the machine table and the top face meets the workpiece. Check that the 132x54x48mm footprint clears your pod bore and that the 48mm height matches the series. Correct seating keeps the workpiece fixed and reduces movement during machining.

Supply is straightforward: the 6308A0160 vacuum cup is brown and customization is supported. Send the part number, the 132x54x48mm size, and a photo of the old cup with your enquiry. That lets the supplier match the 48mm height series and the Biesse Rover application before anything ships.

What the specification fixes, and what it leaves to the machine:

• Workpiece holding on Biesse Rover tables — The 6308A0160 clamps the workpiece to the machine table so it stays fixed through cutting and shaping operations.
• Fit for Biesse Rover vacuum positions — This vacuum clamping block is a replacement cup for Biesse Rover machines, matching the 6308A0160 replacement position.
• Footprint check before installation — At 132x54x48mm, the block gives a defined footprint to compare against the pod bore on your machine table.
• Height series match — The 48mm height places this cup in the 1/3 vacuum pod series, so height match is checked against your existing pod.
• Wear point at the sealing face — The brown cup body is the contact point between vacuum and workpiece; replace it when holding force drops or the face no longer sits flat.
• Mounting at the base — The block seats on the machine table at its base, and the top face meets the workpiece for clamping.
• Part number identification — 6308A0160 is the number to quote when ordering, so the replacement matches the cup being removed.
• Color for quick identification — The brown color lets you identify the cup style on the table during changeover and maintenance checks.

What changes on the shop floor when the right part goes back in:

• Keeps the workpiece fixed during the cut. A seated 6308A0160 vacuum block holds the workpiece on the machine table, which reduces movement that causes scrap marks and rework on Biesse Rover runs.
• Replacement made simple by part number. Ordering by 6308A0160 removes guesswork: the number matches the cup you are removing, so the replacement goes straight to the machine.
• Size you can check before ordering. The 132x54x48mm dimensions give a concrete check against your pod bore and table, so you confirm the footprint before the cup ships.
• Height series keeps the table consistent. The 48mm height places the block in the 1/3 vacuum pod series, so it matches the height of the cups already on your Biesse Rover table.
• Wear part you can plan around. The cup is a wear point at the workpiece contact face; keeping a spare 6308A0160 on hand cuts the downtime when holding force drops.
• Customization supported for specific needs. If your setup needs a variation, customization is supported; send the 6308A0160 part number and 132x54x48mm size with your requirement.
• Clear enquiry path for correct supply. Sending the part number, size, and a photo of the old cup with your enquiry gives the supplier what is needed to match the Biesse Rover application.

Check the 132x54x48mm size and the 6308A0160 part number against the cup you are removing. The block is a vacuum replacement for Biesse Rover machines, and the 48mm height places it in the 1/3 vacuum pod series.

It refers to the 48mm height series. The 6308A0160 measures 132x54x48mm, so the 48mm height is the figure to compare with the pods already on your machine table.

Measure the old cup and compare it with 132x54x48mm. Also quote the 6308A0160 part number; matching both the size and the number is the check before you order.

Yes, customization is supported. Send the 6308A0160 part number, the 132x54x48mm size, and your requirement with the enquiry so the request is clear.

Send the part number 6308A0160, the 132x54x48mm size, and a photo of the old cup. That gives the supplier the details to match the Biesse Rover application.

The cup is brown. The brown color helps identify the style on the table during changeover and maintenance checks.

It is made in China. The part number is 6308A0160 and the size is 132x54x48mm.

It securely fixes the workpiece on the machine table. The block seats at its base on the table and the top face meets the workpiece, so the cup clamps the part through vacuum.