Pressure Roller With Bearing Woodworking Wrapping Machine Silicon Wheel

A pressure roller for woodworking wrapping machines, supplied with a bearing and a blue rubber wheel. The outer diameter is 60mm, and the rubber wheel is available in 15 kinds of specifications with angle sizes R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60. It mounts as a wrapping machine accessory. To confirm fit, check the angle size and the 60mm outer diameter against the roller you are replacing, and send those details with your enquiry.

When the pressure roller on a wrapping machine stops tracking, the wrap can slip or crease at the edge instead of pressing flat. This roller addresses that wear point on the machine: the rubber wheel is the part that contacts the workpiece, and the bearing inside it carries the rotation.

This is a pressure roller with a bearing, made with a rubber wheel and supplied in blue. The outer diameter is 60mm, and the wheel comes in 15 kinds of specifications with angle sizes R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60. It fits woodworking wrapping machines as an accessory.

Check the angle size stamped or measured on the old roller before ordering, because the R1 through R60 range covers different edge profiles. The bearing is already in the roller, so mounting is a matter of fitting the roller to the machine’s roller position and checking that it turns freely.

Supply is by specification: tell us the angle size you need from the R1 to R60 range and confirm the 60mm outer diameter. If you are replacing a worn roller, send the machine model and the old roller’s angle size with your enquiry. Packing and customisation details are not stated here, so ask about them when you send the specification.

What the specification fixes, and what it leaves to the machine:

• Bearing fit — The roller is supplied with a bearing already in place, so it mounts as a rotating pressure roller on the wrapping machine.
• Edge profile choice — Angle sizes R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60 let you match the roller to the edge profile.
• Rubber contact wheel — The rubber wheel is the contact surface against the workpiece, and the 60mm outer diameter sets the roller’s running size.
• Wrapping machine fit — As a woodworking wrapping machine accessory, the roller fits the roller position on that machine type.
• Specification range — 15 kinds of specifications are available, so buyers replacing a worn roller can order by angle size rather than by machine model.
• Visual check — The blue wheel colour makes it easy to spot the roller on the machine when checking rotation or wear.
• Wear point — The rubber wheel takes the contact wear, and the bearing carries rotation, so the roller is the part to check when pressure drops.
• Installation check — After mounting, turn the roller by hand to confirm the bearing runs free before running the wrapping machine.

What changes on the shop floor when the right part goes back in:

• Bearing included, fewer parts to source. Because the bearing comes with the roller, you order one item instead of matching a separate bearing to a wheel. That shortens the replacement step when a roller seizes.
• Angle sizes cover the range you see. With R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60 available, you can specify the edge profile instead of forcing a roller that does not match.
• 60mm outer diameter is a known reference. The 60mm outer diameter gives you a fixed size to check against the old roller, so the fit is confirmed before the order goes out.
• Rubber wheel for contact pressure. The rubber wheel is the part that presses against the workpiece, and its condition decides whether the wrap runs flat or slips at the edge.
• Blue wheel is easy to identify. A blue rubber wheel stands out on the machine, which helps when you are checking roller rotation or looking for the wear point.
• 15 specifications in one range. The 15 kinds of specifications mean a buyer can order by angle size from a single range, rather than hunting different rollers for each machine.

It fits woodworking wrapping machines as an accessory. Check the roller position on your machine and match the angle size and 60mm outer diameter to the roller you are replacing.

Choose the angle size by the old roller on your machine. The available angle sizes are R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60, so measure or read the old roller before ordering.

Yes, the roller is supplied with a bearing. That means the bearing is already in the roller, and you fit the roller as one unit rather than matching a separate bearing.

The outer diameter is 60mm. Confirm that 60mm matches the roller on your machine, because the angle size range shares that outer diameter.

The wheel is rubber, and it is blue. The rubber wheel is the contact surface that presses against the workpiece on the wrapping machine.

There are 15 kinds of specifications. The range covers the angle sizes R1, R1.5, R2, R3, R5, R8, R10, R11, R15, R20 and R60, all with a 60mm outer diameter.

Send the angle size you need and the 60mm outer diameter, plus the machine model if you are replacing a worn roller. That lets the roller be checked against your wrapping machine.

The bearing is already in the roller, so mounting is fitting it to the machine’s roller position. After mounting, turn it by hand to confirm the bearing runs free before running the machine.