Aluminum Roller Track Woodworking Machinery Parts ART-P1 Yellow Plastic Roller

The ART-P1 is an aluminum roller track with plastic rollers for woodworking edgebanding machines. It supports long panels at the infeed and outfeed, reducing manual handling. The frame is aluminum profile; rollers are yellow plastic. Length is customized to your machine layout. Before ordering, measure the mounting area and confirm the track length and roller spacing suit your edgebanding machine model. Shipment is by sea because the goods are heavy.

When feeding long panels into an edgebanding machine, the infeed end can sag, causing the panel to catch or drift off line. This roller track supports the panel before and after the pressure rollers, keeping the edge square to the cutter. It removes the need for a second operator to hold the tail end.

Aluminum profile forms the frame, with yellow plastic rollers set along its length. Length is customized to your machine and shop layout. It fits woodworking edgebanding machines; no universal mounting pattern is stated. To confirm fit, measure your existing support points and compare them with the track's mounting holes, and check that the roller height matches your machine bed.

Check that the mounting surface is flat and that the track sits level with the machine bed. Rollers should turn freely; any drag will show up as panel scuffing. Because the frame is aluminum, it resists corrosion and stays light enough to reposition when you change jobs.

Shipment is by sea because the goods are heavy. Length is customized, so the buyer should send the required length, the machine model, and the mounting dimensions with the enquiry. Confirm the roller spacing you need for the panel sizes you run. No packaging details or lead time are stated; ask for both when requesting a quote.

What the specification fixes, and what it leaves to the machine:

• Infeed support — Supports long panels before the edgebanding machine infeed, reducing sag and helping keep the panel edge square to the cutters.
• Outfeed support — Holds panels after the outfeed so they do not drop or tip, allowing one operator to handle the panel.
• Frame material — Aluminum profile frame keeps the track light enough to reposition yet rigid enough to support panels without bending.
• Roller material — Yellow plastic rollers turn with low friction, so panels slide without scratching laminated boards or MDF surfaces.
• Length customization — Length is customized to your machine and shop layout, so the track can match your existing infeed and outfeed distances.
• Machine fit — Fits woodworking edgebanding machines; confirm your machine model and mounting hole pattern before ordering.
• Roller spacing check — Check roller spacing against your shortest panel so small workpieces always rest on at least two rollers.
• Mounting height — Set the track level with the machine bed; a step at the joint will catch panel edges and cause misfeeds.
• Corrosion resistance — Aluminum frame resists corrosion in shop conditions, so the track stays free of rust and keeps rollers turning freely.

What changes on the shop floor when the right part goes back in:

• One operator can run long panels. With infeed and outfeed support, the tail end of a long panel no longer needs a second person to hold it, freeing labor for other tasks.
• Panel edges stay square to the cutter. A level, low-friction track keeps the panel from drifting as it enters the machine, so the edgebanding line stays straight and rework drops.
• Surface scratches from manual handling drop. Plastic rollers contact the panel instead of a bare table or hands, reducing scuff marks on laminated boards and MDF during transfer.
• Repositioning between jobs is quick. The aluminum frame is light enough for one person to move, so changing from one panel length to another does not require a forklift.
• Corrosion does not seize the rollers. Aluminum profile does not rust like steel, so roller axles stay free and the track keeps rolling in humid or dusty shop conditions.
• Custom length matches your layout. Because length is customized, the track can span your exact infeed and outfeed distances without gaps or overhang that catch panels.
• Heavy goods ship by sea. Sea shipment suits the weight of the track; ask for packing details and lead time with your enquiry so you can plan installation.

Measure your machine's mounting points and compare them with the track's mounting holes; no universal pattern is stated, so send your machine model with the enquiry.

Yes, length is customized; send the required length in millimeters and the distance between your infeed and outfeed support points.

The rollers are plastic and yellow; they run quiet and will not scratch laminated boards or MDF.

Mount it on a flat surface level with the machine bed; a step at the joint will catch panel edges, so check height before tightening.

The aluminum profile frame supports panels without bending, but confirm the load with your panel sizes; no load rating is stated.

Shipment is by sea because the goods are heavy; ask for packing details and lead time when you request a quote.

It suits wood-based panels, laminated boards, and MDF; plastic rollers contact the surface without scratching.

Send the required length, your machine model, mounting dimensions, and roller spacing you need, so the track can be made to fit.