EGURKO Woodworking Machinery Parts Conveyor Track Chain Pads 65x55mm Rubber

Conveyor track chain pads for EGURKO edgebanders, sized 65*55mm and made from rubber and plastic. These pads sit on the conveyor track chain and support the panel as it moves through the machine. Worn pads let the chain run unevenly, so check the size against your old pad and confirm the EGURKO model before ordering. Shipment by DHL, FedEx, UPS, etc. Contact us for product details.

When the pads on the conveyor track chain wear down, the chain no longer holds the panel steady. The panel can shift or stall, and edges come out uneven. Replacing the pads at 65*55mm puts a fresh contact surface back under the chain.

These are conveyor track chain pads made from rubber and plastic. Each pad measures 65*55mm and fits EGURKO edgebanding machines. To confirm the fit, measure your old pad and compare it to 65*55mm, then check that your machine is an EGURKO edgebander.

Pull a worn pad and check the chain for slack before fitting new ones. The pads mount on the track chain and carry the panel along. With 65*55mm pads in place, the chain runs with a consistent contact surface, which reduces uneven movement.

Pads ship by DHL, FedEx, UPS, etc. No customisation or packing details are stated, so ask if you need either. When you enquire, send your EGURKO model, the pad size 65*55mm, and the quantity you need. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch. The model number and the dimensions together identify the part.

What the specification fixes, and what it leaves to the machine:

• Wear point — The pad face is the contact point between the conveyor track chain and the panel, so it takes the wear instead of the chain.
• Size check — Each pad measures 65*55mm, so measure your old pad before ordering to confirm the size matches.
• Machine fit — These pads are spares for EGURKO edgebanding machines, so check your machine is an EGURKO edgebander before buying.
• Material behaviour — Rubber and plastic construction gives the pad a contact surface that supports the panel along the track chain.
• Chain contact — The pad sits on the conveyor track chain and gives the chain a contact surface to carry the panel through the machine.
• Replacement point — Fit new pads when the old ones are worn, so the chain has a fresh 65*55mm contact surface under the panel.
• Panel support — A pad at 65*55mm supports the panel as it moves, which helps keep the panel steady on the track chain.
• Fit confirmation — Compare the 65*55mm size with your old pad and check the EGURKO model to confirm the pad fits your machine.
• Wear prevention — Replacing worn pads puts a new contact surface under the chain, which helps limit wear on the chain itself.

What changes on the shop floor when the right part goes back in:

• Restores chain contact. A worn pad leaves the chain with an uneven contact surface. Fitting a 65*55mm pad puts a fresh surface under the chain, so the panel is carried more steadily.
• Takes the wear off the chain. The pad is the contact point between chain and panel. Replacing the pad at 65*55mm means the pad wears instead of the chain, which keeps the chain running.
• Simple size match. The pad is 65*55mm. Measure your old pad against that size before ordering, so you know the replacement matches what came off the machine.
• Built for EGURKO machines. These pads are spares for EGURKO edgebanding machines. Check your machine is an EGURKO edgebander, so the pad fits the conveyor track chain.
• Rubber and plastic. The pad is made from rubber and plastic. That gives a contact surface for the track chain, so the panel is supported as it moves through the machine.
• Fewer panel shifts. When pads wear, the panel can shift on the chain. A new 65*55mm pad gives the chain a consistent surface, which helps keep the panel steady.

Check that your machine is an EGURKO edgebander and that your old pad measures 65*55mm. These pads are spares for EGURKO edgebanding machines and are sized 65*55mm.

The pads measure 65*55mm. Measure your old pad against that size before ordering to confirm the match.

They are made from rubber and plastic. That material gives the pad a contact surface for the conveyor track chain.

Count the pads on your conveyor track chain and order that number. Send the quantity with your enquiry so the order matches your machine.

Measure your old pad and compare it to 65*55mm, then check your machine is an EGURKO edgebander. Send your EGURKO model with the enquiry.

Shipment is by DHL, FedEx, UPS, etc. Ask which carrier is used for your destination when you send your enquiry.

Contact us for product details. Send your EGURKO model, the 65*55mm size, and the quantity you need so we can answer your question.

No customisation or packing details are stated for these pads. Ask when you enquire if you need either for your order.