3-008-04-0200 Homag Shock Absorber 3008040200 Woodworking Machine Spares

The 3-008-04-0200 PU Shock Absorber fits Homag woodworking machines, damping vibration to protect mechanical parts. It is made of yellow PU and carries the reference number 3008040200. Confirm fit by matching both numbers to the part you are replacing. Supplied as a woodworking machine spare, it ships by DHL, FedEx, UPS, or other carriers. Use it where the original shock absorber has worn, hardened, or stopped absorbing movement.

When a Homag machine starts shaking, knocking, or wearing adjacent parts faster than usual, the shock absorber is often the first suspect. A worn or hardened unit stops damping vibration, so movement transfers into the frame and linkages. Replacing it with the 3-008-04-0200 restores the cushioning the machine was built around.

The 3-008-04-0200 is a shock absorber made of PU, supplied in yellow. It is a woodworking machine spare for Homag machines and carries the reference number 3008040200. To confirm fit, match both 3-008-04-0200 and 3008040200 against the number on the old part or your machine's parts list before ordering.

Check the mounting points on the machine and compare them with the old shock absorber before installation. The PU body should sit without play, and the unit should compress and return as intended. A correct mount keeps vibration away from nearby parts; a loose or wrong fit lets movement travel into the frame.

Supply runs through DHL, FedEx, UPS, and other carriers. No customisation or special packaging is stated for this part. When you enquire, send the machine model, the number 3-008-04-0200 or 3008040200, and a photo of the old shock absorber so the fit can be checked against your order.

What the specification fixes, and what it leaves to the machine:

• Vibration damping on Homag machines — The PU shock absorber reduces vibration transfer into the machine frame, helping protect nearby mechanical parts from extra wear during daily operation.
• Fit confirmation by dual reference — Both 3-008-04-0200 and 3008040200 appear on this part, so you can match either number against the old unit or parts list.
• PU body behaviour — Polyurethane gives the shock absorber elasticity and toughness, so it can absorb movement and return instead of staying compressed.
• Yellow colour identification — The yellow PU body makes the shock absorber easy to spot during inspection, helping you distinguish it from other spares on the machine.
• Wear point protection — By damping shock loads, the unit limits the wear that repeated vibration causes on linkages and mounting points around the machine.
• Installation check at the mount — Before fitting, compare the old and new shock absorber at the mounting points to confirm the PU body sits without play.
• Spare-part role for Homag — As a woodworking machine spare, the 3-008-04-0200 is intended for Homag equipment and supports routine replacement of a worn damper.
• Shipping options — Orders can move by DHL, FedEx, UPS, or other carriers, so you can choose a route that suits your workshop delivery needs.

What changes on the shop floor when the right part goes back in:

• Cuts vibration at the source. A working PU shock absorber takes shock loads out of the machine structure, so linkages and mounts see less repeated movement and wear.
• One part, two numbers to check. Because 3-008-04-0200 and 3008040200 both identify this shock absorber, you have two references to confirm against the old unit.
• PU that keeps its cushion. Polyurethane elasticity and toughness let the absorber compress and recover under load, which is the behaviour a damper needs to keep working.
• Visible during inspection. The yellow colour stands out on the machine, so a worn or damaged shock absorber is easier to find on a routine walk-round.
• Fits Homag spare planning. As a woodworking machine spare for Homag equipment, it belongs in your scheduled replacement list instead of being an emergency order.
• Mount check before fit. Comparing the old and new unit at the mounting points before installation helps you avoid fitting a shock absorber that sits loose.
• Shipping you can route. DHL, FedEx, UPS, and other carriers are available, letting you pick a delivery method that matches how soon the machine needs to run.

Match both 3-008-04-0200 and 3008040200 against the number on the old shock absorber or your machine's parts list. If both numbers match, the part is the correct spare for that position.

It is made of PU, supplied in yellow. Polyurethane gives the unit elasticity and toughness for damping movement on the machine.

Replace it when the old unit has hardened, stopped cushioning, or the machine shows more vibration and knocking. A PU damper that no longer absorbs movement is the signal.

Check the mounting points against the old shock absorber and confirm the PU body sits without play. The unit should compress and return as intended once fitted.

The available facts do not state a pack quantity or minimum order. Send your required quantity with the enquiry and the supplier can confirm what can be supplied.

Shipment is by DHL, FedEx, UPS, or other carriers. Tell the supplier which carrier you prefer when you place the order.

Send the machine model, the number 3-008-04-0200 or 3008040200, and a photo of the old shock absorber. That lets the fit be checked against your order before shipping.

No customisation or special packaging is stated for this part. Ask the supplier directly if you need something beyond the standard supply.