75mm Spinidle CNC Dust Cover Dust Shoe For CNC Router Machine Dust Proof

A 75mm dust shoe for CNC router spindles, made by Shunhongyu in white-painted iron and nylon brush. It fits a 75mm spindle and collects chips at the cut. The detachable, push-pull design lets you remove the cover for bit changes or cleaning without pulling the spindle. Confirm fit by measuring your spindle collar at 75mm before ordering. Other sizes are 67, 70, 80, 90, 100, 105 and 125mm. Send your spindle diameter and machine model with any enquiry.

Chips pile up around the collet during routing, and a fixed guard makes bit changes slow. A dust shoe that pulls away in one motion solves that. Without one, debris reaches the rails and the cut quality drops on the next pass.

This is a 75mm dust shoe in white-painted iron with a nylon brush, branded Shunhongyu. It suits CNC router spindles with a 75mm collar. Sizes run 67, 70, 80, 90, 100, 105 and 125mm. Measure your spindle collar with a caliper and match it to 75mm before ordering.

The brush sits around the cutter and the cover slides open for bit access. Iron holds the body shape over repeated removal; nylon brush strands stay flexible against the work surface. Check that the brush clears your longest bit and that the slide path is free.

Orders ship as single units; packing and customisation are not stated. Send your spindle diameter, machine model and the size you need with an enquiry. State whether you want the 75mm or another size from 67 to 125mm so the correct cover is picked. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Spindle fit check — The 75mm bore matches a 75mm spindle collar; measure the collar with a caliper before ordering to avoid a loose or tight fit.
• Detachable cover — The cover separates from the brush ring so you can remove it for bit changes or cleaning without unbolting the spindle.
• Push-pull access — The sliding door type opens in one motion, giving hand access to the collet area during setup and tool changes.
• Brush wear point — Nylon brush strands contact the work surface and wear over time; inspect them for bent or missing strands during routine checks.
• Iron body — The upper body is thick iron plate, which holds its shape through repeated removal and refitting on the spindle.
• Size range — Sizes of 67, 70, 80, 90, 100, 105 and 125mm cover common spindle collars; the 75mm version is this item.
• White finish — White-painted iron makes chips and dust visible on the cover, so a buildup is easy to spot before it reaches the cut.
• CNC router use — Designed as a spare for CNC router and engraving machines, it mounts at the spindle to collect chips at the source.

What changes on the shop floor when the right part goes back in:

• Faster bit changes. The cover detaches and slides open in one motion, so the operator reaches the collet without removing the spindle or the dust hose.
• Less debris on the rails. The nylon brush surrounds the cutter and blocks chips at the source, which keeps debris off the rails and the next pass cleaner.
• Fit confirmed before shipping. Matching the 75mm bore to a measured spindle collar avoids a return and keeps the machine running with the correct cover.
• Shape holds over time. Iron plate resists bending through repeated removal and refitting, so the cover keeps its fit on the spindle collar.
• Visible buildup. White-painted iron shows chip buildup early, so the operator can clear the brush before debris reaches the cut.
• One spare for several spindles. The size range from 67 to 125mm lets a shop stock the correct cover for each spindle without mixing part numbers.
• Brush conforms to the work. Flexible nylon strands follow the work surface, keeping the sweep close without scratching the material being cut.
• It fits the machine you already run. The dust shoe is made for CNC Machine Spares, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Check your spindle collar diameter first. This cover has a 75mm bore and fits spindles with a 75mm collar; measure with a caliper before ordering.

The range is 67, 70, 80, 90, 100, 105 and 125mm. This item is the 75mm version; order the size that matches your measured spindle collar.

White-painted iron for the upper body and nylon for the brush. The iron holds shape and the nylon stays flexible against the work surface.

The cover detaches and the push-pull door slides open. That gives hand access to the collet without removing the spindle or dust hose.

Yes, it is intended for CNC router and engraving machine spindles. Confirm the 75mm collar size and that the brush clears your longest bit.

Send your spindle diameter, machine model and the size you need from 67 to 125mm. Packing and customisation details are not stated, so ask.

The cover is detachable for maintenance and cleaning. Brush replacement is not stated in the product data, so ask about spare brushes with your enquiry.

White is the stated colour. Other colours are not stated; ask about finish options when you send your spindle size and machine model.