3-607-11-2720 3607112720 SPROCKET Z 15- 06B-1 Woodworking Machinery Tool

This is a 15-tooth sprocket (06B-1) for Homag woodworking machines, part number 3-607-11-2720 3607112720. It drives the chain in feed or transfer sections, and a worn sprocket shows as chain noise, tight links, or uneven movement. Check the old sprocket for 15 teeth and 06B-1 chain before ordering. Material is not stated in the data, so confirm with the supplier if you need a specific grade. SHUNHONGYU supplies various woodworking machine parts and ships by DHL, FedEx, UPS, or similar.

When the chain starts jumping or the feed stutters, a worn 15-tooth sprocket is often the cause. This sprocket (3-607-11-2720 3607112720) wears at the tooth flanks, and that wear shows up as chain noise, tight links, or uneven movement on the machine.

The part is a sprocket with 15 teeth, sized for 06B-1 chain, and fits Homag woodworking machines. Material is not stated in the data, so ask the supplier if you need a specific grade. To confirm fit, count the teeth on the old sprocket and check the chain pitch against 06B-1.

Before ordering, check the old sprocket for 15 teeth and confirm the chain is 06B-1. Also inspect the shaft and keyway for wear. A correct 15-tooth sprocket keeps the chain running true and reduces load on the chain and shaft.

SHUNHONGYU supplies various woodworking machine parts and ships by DHL, FedEx, UPS, or similar. Packing and customisation details are not stated. When you enquire, send the part number 3-607-11-2720 3607112720, the quantity, and a photo of the old sprocket showing the 15 teeth. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Tooth count check — With 15 teeth, this sprocket matches the original count; confirm by counting teeth on the old part before ordering.
• Chain size fit — The 06B-1 chain size means you can verify the chain pitch against the old sprocket and chain before installation.
• Wear point at teeth — Tooth flanks wear first; a 15-tooth sprocket showing hooked or sharp teeth needs replacement to avoid chain damage.
• Machine fit — Fits Homag woodworking machines; check the old sprocket part number 3-607-11-2720 3607112720 against this number.
• Installation check — Inspect the shaft and keyway for wear before mounting; a worn shaft can cause the new 15-tooth sprocket to run off-centre.
• Part number match — The part number 3-607-11-2720 3607112720 is the key identifier; use it to confirm the sprocket matches your machine's parts list.
• Shipping method — Ships by DHL, FedEx, UPS, or similar, so you can plan downtime around the delivery once the order is confirmed.
• Supplier support — SHUNHONGYU supplies various woodworking machine parts; contact them with the part number and a photo to confirm the 15-tooth sprocket.
• Replacement decision — Replace the sprocket when chain noise increases or the chain jumps; a 15-tooth sprocket with worn teeth will not hold chain pitch.

What changes on the shop floor when the right part goes back in:

• Correct tooth count reduces chain wear. Using a 15-tooth sprocket that matches the original count helps keep the chain running at the intended speed and reduces uneven wear on the chain links.
• Chain size match avoids mismatch. The 06B-1 chain size means you can check the chain pitch before ordering, so you avoid the downtime of receiving a sprocket that does not fit the chain.
• Early replacement prevents feed stops. Replacing a worn 15-tooth sprocket before the chain jumps or the feed stutters helps avoid unplanned stops and keeps the machine running through the shift.
• Part number check saves time. Confirming the part number 3-607-11-2720 3607112720 against your machine's parts list reduces the risk of ordering the wrong sprocket and waiting for a return.
• Shaft inspection protects the new part. Checking the shaft and keyway before mounting a 15-tooth sprocket helps the new part run true and prevents early wear from a worn shaft.
• Shipping options support planning. DHL, FedEx, UPS, or similar shipping means you can choose a method that fits your maintenance schedule and keep the machine's downtime to a minimum.

Check the part number 3-607-11-2720 3607112720 against your machine's parts list. Also count the teeth on the old sprocket; it should have 15 teeth and use 06B-1 chain.

It uses 06B-1 chain. Confirm the chain pitch on your machine matches 06B-1 before ordering, as a different chain size will not fit the 15-tooth sprocket.

Material is not stated in the data. Contact SHUNHONGYU directly if you need a specific material grade for your application.

It is intended for Homag woodworking machines. Check the part number and chain size against your machine's requirements before using it elsewhere.

Inspect the shaft and keyway for wear, then mount the 15-tooth sprocket and align it with the chain. A worn shaft can cause the new sprocket to run off-centre.

Replace it when you see hooked or sharp teeth, hear increased chain noise, or notice the chain jumping. A worn 15-tooth sprocket will not hold chain pitch.

Shipping is by DHL, FedEx, UPS, or similar. Confirm the shipping method and cost with SHUNHONGYU when you place your order.

Send the part number 3-607-11-2720 3607112720, the quantity you need, and a photo of the old sprocket showing the 15 teeth. This helps confirm the fit quickly.