4-008-35-0616 DISTRIBUTOR 6-FACH SAI-6-11-5P M12 4008350616 Spare Part for Homag

This is a 6-FACH distributor, part number 4-008-35-0616 4008350616, for Homag woodworking machines. It uses M12 connectivity and is identified by SAI-6-11-5P. The part is new and ships as a spare for Homag equipment. To confirm fitment, match the part number 4-008-35-0616 4008350616 and the 6-FACH and M12 markings against the distributor you are replacing. No dimensions or material are stated here. Send your machine model and the old part's markings with your enquiry. Shipping is by DHL, FedEx, UPS, or similar.

When a six-way distributor on a Homag machine stops passing signals cleanly, the machine can fault or run erratically. Replacing the 4-008-35-0616 4008350616 distributor is the direct fix. This part is the 6-FACH unit with M12 connectivity, so it addresses faults tied to that distributor position.

The 4-008-35-0616 4008350616 is a new spare part for Homag machines, carrying the SAI-6-11-5P designation and 6-FACH capability. It uses M12 connectivity. To confirm the fit, compare the part number 4-008-35-0616 4008350616 and the 6-FACH and M12 markings on the distributor you are removing. No dimensions or material are stated.

Check the M12 connection points and the 6-FACH layout against the old unit before mounting. The M12 connector is the interface you will be mating, so inspect its threads and pins. A correct match on part number, 6-FACH capability, and M12 connectivity is what tells you the replacement will seat and connect as the original did.

Supply is straightforward: the part is new and ships by DHL, FedEx, UPS, or similar. No packaging or customisation details are stated. When you enquire, send the part number 4-008-35-0616 4008350616, your Homag machine model, and a photo of the old distributor's markings. That lets the supplier confirm the 6-FACH, M12, SAI-6-11-5P unit before dispatch.

What the specification fixes, and what it leaves to the machine:

• Six-way distribution point — The 6-FACH capability means this distributor handles six functions at one point on the Homag machine, matching the original layout.
• M12 connection interface — M12 connectivity is the connection type on this distributor, so the mating cable end must be M12 to connect.
• Part number identification — The part number 4-008-35-0616 4008350616 is the identifier to match against the distributor being replaced on the machine.
• Model marking check — SAI-6-11-5P is the model designation on this distributor, giving a second marking to verify before installation.
• New condition — The distributor is new, so there is no rework or repair history on the unit you receive for the Homag machine.
• Homag machine fit — Application is as a spare for Homag machines, so the fitment check is against Homag equipment and the existing distributor.
• Connection inspection point — Inspect the M12 connector threads and pins on the old unit before ordering, because that interface must match the new part.
• Six-function layout check — Compare the 6-FACH layout of the old distributor with the replacement, since the six distribution points must align with the machine wiring.

What changes on the shop floor when the right part goes back in:

• Direct replacement for a failed distributor. When the 6-FACH distributor on your Homag machine faults, fitting the 4-008-35-0616 4008350616 unit restores the six-way distribution point without adapting a different part.
• Fitment confirmed by markings, not guesswork. Matching the part number 4-008-35-0616 4008350616 and the 6-FACH and M12 markings on the old unit tells you the replacement matches before you install it.
• M12 interface keeps connection simple. Because the connection type is M12, the mating cable end is a known interface, so you can inspect the old connector and order with confidence.
• New unit, no repair history. The distributor arrives new, so you are not fitting a repaired or reworked part onto a Homag machine that depends on clean six-way distribution.
• Six functions at one point. The 6-FACH capability concentrates six distribution functions in one distributor, matching the original machine layout and keeping the wiring arrangement unchanged.
• Carrier choice for delivery. Shipment by DHL, FedEx, UPS, or similar lets you pick a carrier that fits your workshop's receiving schedule and location.
• Enquiry backed by part numbers. Sending the part number 4-008-35-0616 4008350616, your machine model, and a photo of the old markings lets the supplier confirm the 6-FACH M12 unit before dispatch.

Match the part number 4-008-35-0616 4008350616 and the 6-FACH and M12 markings on your old distributor. If those match, the replacement is the same distributor type for your Homag machine.

6-FACH is the distributor's capability to handle six functions at one point. It is the distribution capability of this unit, so your machine's original distributor should carry the same 6-FACH marking.

The connection type is M12. Check that the cable end you are mating to the distributor is M12, and inspect the old connector's threads and pins before ordering.

It is new. The condition stated for this 4-008-35-0616 4008350616 distributor is new, so there is no repair or rework history on the unit.

Look for SAI-6-11-5P on the old distributor along with 4-008-35-0616 4008350616. Those markings, plus 6-FACH and M12, are what you compare before ordering.

Shipment is by DHL, FedEx, UPS, or similar. Choose the carrier that suits your workshop's receiving schedule when you place the order.

Send the part number 4-008-35-0616 4008350616, your Homag machine model, and a photo of the old distributor's markings. That lets the supplier confirm the 6-FACH M12 unit before dispatch.

No dimensions or material are stated for this distributor. Confirm fit by part number 4-008-35-0616 4008350616 and the 6-FACH, M12, and SAI-6-11-5P markings instead.