3-412-08-5730 3412085730 HOLDER ROLLEN ROLLENSCHIENE HUTPROFIL Homag Spare Parts

The 3-412-08-5730 (3412085730) Holder Rollen Rollenschiene Hutprofil is a plastic spare part for Homag woodworking machines, black in color. It fits the roll guide system. Confirm fitment by matching the part number 3-412-08-5730 or 3412085730 to your machine's parts manual and checking that the holder, roller, and rail profile match the original. Shipment is by DHL, FedEx, UPS, or similar. Contact us with your machine details and part number to order.

When the roll guide on a Homag machine starts to bind or the holder no longer keeps the roller seated, the cause is often a worn or cracked Holder Rollen Rollenschiene Hutprofil. A loose holder lets the roller wander off the rail, which shows up as inaccurate material handling and scrap. Replacing the worn holder restores the roll guide to its original working position.

This part is a black plastic holder for the roller and rail profile, identified by part number 3-412-08-5730 or 3412085730. It is a spare for Homag woodworking machines. To confirm the fit, check your machine's parts manual for the same part number and compare the holder shape, roller seat, and rail profile with the original before ordering.

Check the holder for cracks, wear at the roller seat, and a loose fit on the rail. The holder mounts in the roll guide assembly and keeps the roller aligned along the rail. A correct fit means the roller tracks smoothly without side play, which maintains accurate positioning of the workpiece through the machine.

Supply is straightforward: we ship by DHL, FedEx, UPS, or similar. No customisation or special packaging is stated. When you enquire, send the part number 3-412-08-5730 or 3412085730, your machine model, and a photo of the old holder. We supply various woodworking machine parts, so include any other part numbers you need.

What the specification fixes, and what it leaves to the machine:

• Roller seating — The holder seats the roller in the roll guide, keeping it aligned along the rail during material handling.
• Rail profile match — The Hutprofil shape matches the rail profile so the holder sits correctly in the guide.
• Wear point — Cracks or wear at the roller seat are the first signs the holder needs replacement.
• Material behaviour — Plastic construction and black color suit the holder's role in the roll guide assembly.
• Fitment check — Match part number 3-412-08-5730 or 3412085730 to your Homag machine's parts manual before ordering.
• Installation detail — The holder mounts in the roll guide; check for side play after fitting to confirm correct alignment.
• Machine compatibility — Designed as a spare for Homag woodworking machines, fitting the roll guide system.
• Replacement trigger — Replace when the roller no longer tracks smoothly or the holder feels loose on the rail.
• Part identification — The part number 3412085730 is marked for identification; compare with the old holder on removal.
• Supply format — Shipped by DHL, FedEx, UPS, or similar; send your machine model and part number with your enquiry.
• Fit — built for Homag machines, in the position the original part occupied.

What changes on the shop floor when the right part goes back in:

• Restores roll guide alignment. A worn holder lets the roller drift off the rail, causing inaccurate cuts. Fitting a new holder brings the roller back to its correct position for smoother material handling.
• Simple fitment check. You can confirm the fit by matching the part number 3-412-08-5730 or 3412085730 to your machine's parts manual and comparing the old holder's shape before you order.
• Clear wear indicator. Cracks or a loose roller seat tell you the holder is worn. Checking these points during maintenance helps you replace the holder before it affects the roll guide.
• Plastic holder for the roll guide. The black plastic holder is made for the roll guide assembly, where it seats the roller and matches the rail profile for consistent tracking.
• Straightforward replacement. The holder mounts in the roll guide assembly. After fitting, check for side play at the roller to confirm the holder is seated correctly.
• Shipping by major carriers. Orders ship by DHL, FedEx, UPS, or similar, so you can plan the replacement around your maintenance schedule.
• Support for multiple parts. We supply various woodworking machine parts. Send all your part numbers with your enquiry to source the holder and other spares together.

Match the part number 3-412-08-5730 or 3412085730 to your machine's parts manual. Also compare the holder shape, roller seat, and rail profile with the old part before ordering.

It holds the roller in the roll guide and keeps it aligned along the rail. A worn holder lets the roller wander, which affects material handling accuracy.

It is made of plastic and is black in color. The plastic construction suits its role in the roll guide assembly.

Replace it when you see cracks, wear at the roller seat, or a loose fit on the rail. These signs mean the holder no longer keeps the roller aligned.

It mounts in the roll guide assembly. After fitting, check for side play at the roller to confirm correct alignment.

Yes, we supply various woodworking machine parts. Include all your part numbers and machine details in your enquiry.

Shipment is by DHL, FedEx, UPS, or similar. No special packaging or customisation is stated.

Send the part number 3-412-08-5730 or 3412085730, your machine model, and a photo of the old holder. This helps confirm the correct part.