2-212-31-1890 2212311890 Deflection Roller For Homag Doppelrolle Mit Stahl

Product Description

This is a metal deflection roller, also called Doppelrolle Mit Stahl, for Homag machines. It fits as a spare under Homag number 2-212-31-1890 or 2212311890. Material is metal, and the roller runs as a woodworking machine spare in Homag equipment. To confirm the fit, check the Homag number on your old roller or your machine's parts book against 2-212-31-1890 and 2212311890 before ordering. Shipment runs by DHL, FedEx, UPS, or similar carriers. Send your machine details and the number with your enquiry.

A worn or seized deflection roller shows up as poor tracking and uneven feed where the roller steers the workpiece or belt. If the roller stops turning cleanly, the machine no longer guides material the way it should, and you are chasing the fault downstream instead of at the roller. Replacing it is the decision this part addresses.

This is the Deflection Roller for Homag, carried under Homag number 2-212-31-1890 or 2212311890 and known in German as Doppelrolle Mit Stahl. It is made of metal and supplied as a woodworking machine spare. Confirm the fit by matching 2-212-31-1890 or 2212311890 against the number on the old roller or in your machine's parts book.

Pull the old roller and check the bore, the running surface, and how it sits on its mount before the new one goes on. A roller that seats correctly and turns freely keeps material tracking straight through the machine. Check that the mount and the roller's running face are clean, then fit and confirm free rotation before running production.

Packing, customisation, and lead time are not stated for this item, so ask before ordering. Shipment runs by DHL, FedEx, UPS, and other carriers. With your enquiry, send the Homag number 2-212-31-1890 or 2212311890, a photo of the old roller, and your machine model so the fit can be checked.

Product Features

What the specification fixes, and what it leaves to the machine:

• Tracking control — The roller guides material through the machine, so a worn running surface shows up as misalignment rather than an obvious break.
• Number match — Order by 2-212-31-1890 or 2212311890 and check the number on the old roller before you commit.
• Metal body — A metal construction takes the running contact of daily feed work, where softer rollers would wear through faster.
• Homag fit — Built as a spare for Homag machines, it drops into the position the original roller occupied.
• Double roller form — The Doppelrolle Mit Stahl form means two rollers on one unit, so both running faces need checking at replacement.
• Wear check — Inspect the running surface for flat spots and the bore for play before fitting a replacement.
• Free rotation — Confirm the roller turns freely on its mount after fitting, since a stiff roller drags on the workpiece.
• Carrier options — Shipment runs by DHL, FedEx, UPS, and similar carriers, so you can match the delivery to your downtime.
• Spare stock — Keep a spare on the shelf, since a failed roller stops the machine until a replacement arrives.

Product Parameters

Product Advantages

What changes on the shop floor when the right part goes back in:

• Fits by number, not guesswork. Matching 2-212-31-1890 or 2212311890 against the old roller or parts book removes the guesswork, so you order the right spare the first time.
• Metal takes the daily contact. A metal roller carries the running contact of feed work without the fast wear you get from softer materials, so it holds its shape through shifts.
• One unit, two running faces. The Doppelrolle Mit Stahl form puts two rollers in one unit, so you replace both running faces together and avoid a second teardown later.
• Guides material straight. A roller that turns freely keeps material tracking straight through the machine, which cuts the misalignment you chase downstream after a failure.
• Keeps a spare within reach. Holding a spare on the shelf means a failed roller does not idle the machine while a shipment is in transit by DHL, FedEx, or UPS.
• Fast fit check before you buy. Sending the number and a photo of the old roller lets the fit be checked before the order ships, so you avoid return freight and lost days.
• Simple replacement job. Pulling the old roller, cleaning the mount, and fitting the new one is a straightforward job a maintenance fitter can complete without special tooling.

Frequently Asked Questions

Will this roller fit my Homag machine?

Match the Homag number first. Check 2-212-31-1890 or 2212311890 against the number on your old roller or in your machine's parts book; if it matches, this is the roller for that position.

What does Doppelrolle Mit Stahl mean?

It is the German name for this part and means a double roller with steel. The part is the Deflection Roller carried under Homag number 2-212-31-1890 or 2212311890.

What material is the roller made of?

It is made of metal. The Doppelrolle Mit Stahl name points to steel, and the roller is supplied as a woodworking machine spare for Homag equipment.

How do I know when the roller needs replacing?

Look for poor tracking and a roller that no longer turns freely. A worn running surface or play in the bore shows up as misalignment in the feed, and that is the point to replace it.

What should I check before fitting a new one?

Check the bore, the running surface, and the mount. Clean the mount and running face, fit the roller, and confirm it turns freely before you run production.

How is it shipped, and how fast?

Shipment runs by DHL, FedEx, UPS, and similar carriers. Lead time is not stated for this item, so ask about it with your enquiry before you plan the downtime.

Can I order more than one, or ask for custom packing?

Packing and customisation are not stated for this item. Send your quantity and packing requirement with your enquiry and ask what is possible before ordering.

What do you need from me to check the fit?

Send the Homag number 2-212-31-1890 or 2212311890, a photo of the old roller, and your machine model. That lets the fit be checked before the order ships.