2007111280 Homag Rubber Infeed Roller 2-007-11-1280 Homag Edge Feed Wheels

Product Description

The 2007111280 Homag Rubber Infeed Roller (also 2-007-11-1280) is a feed wheel for Homag edge banding machines. It measures 33 mm diameter, 12 mm bore, and 40 mm width, made of rubber with a steel core. Rubber grip pulls workpieces into the machine without slipping. To confirm fit, check your machine parts book for Homag number 2-007-11-1280 or 2007111280 and measure the old roller: 33 mm diameter, 12 mm bore, 40 mm width.

When an infeed roller wears smooth or glazes, workpieces slip instead of feeding evenly. Edge banding then runs out of line, and the operator has to stop the machine to clear jams.

The 2007111280 is a rubber and steel feed wheel for Homag edge banding machines. It is black and measures 33 mm in diameter, 12 mm in bore, and 40 mm in width. To confirm it fits your machine, look up Homag number 2-007-11-1280 or 2007111280 in the parts book and measure the old roller.

Check the bore and width on the shaft before mounting. With a 12 mm bore and 40 mm width, the roller seats on the shaft and contacts the workpiece across its face. A worn roller can be swapped without changing machine settings, so the machine is back in production after a short stop.

SHUNHONGYU supplies various woodworking machine parts. Send the Homag number 2-007-11-1280 or 2007111280, the quantity you need, and a photo of the old roller with your enquiry. That lets us confirm the rubber infeed roller matches your Homag machine before you order.

SHUNHONGYU supplies various woodworking machine parts. Send the Homag number 2-007-11-1280 or 2007111280, the quantity you need, and a photo of the old roller with your enquiry. That lets us confirm the rubber infeed roller matches your Homag machine before you order.

Product Features

What the specification fixes, and what it leaves to the machine:

• Grip on the feed line — Rubber face grips the workpiece and pulls it into the edge bander without slipping on the infeed.
• Fit on Homag edge banders — Fits Homag edge banding machines that use Homag number 2-007-11-1280 or 2007111280.
• Roller dimensions — Measures 33 mm in diameter, 12 mm in bore, and 40 mm in width for a direct fit on the shaft.
• Steel core support — Rubber bonded to a steel core holds the roller's shape under the pressure of feeding workpieces.
• Colour identification — Black rubber face makes it easy to spot wear or glazing during a quick check of the feed area.
• Bore fit check — 12 mm bore seats on the shaft; check the old roller's bore before mounting the replacement.
• Width contact area — 40 mm width gives a contact band across the workpiece for steady feeding through the machine.
• Wear point to watch — Rubber face wears with continuous feeding; replace the roller when the surface glazes or slips.
• Straightforward swap — Remove the old roller from the shaft and fit the 2007111280 in its place to restore feed grip.
• Spare part supply — SHUNHONGYU supplies various woodworking machine parts; send the Homag number to confirm the roller.

Product Parameters

Product Advantages

What changes on the shop floor when the right part goes back in:

• Restores feed grip. A worn rubber face lets workpieces slip; fitting the 2007111280 brings back the rubber contact that pulls stock into the edge bander.
• Cuts jam downtime. When the roller grips evenly, workpieces feed without stalling, so operators spend less time clearing the infeed area.
• Matches the machine. The 33 mm diameter, 12 mm bore, and 40 mm width are the dimensions to check against the old roller and the Homag parts book.
• Keeps edge banding in line. Steady feeding from the infeed roller helps keep the workpiece against the fence, so the edge band runs where it should.
• Simple replacement. The roller mounts on the shaft with a 12 mm bore; swapping it does not require changing the machine's feed settings.
• Easy wear check. The black rubber face shows glazing or flat spots, so a fitter can decide on replacement during a routine inspection.
• Order with confidence. Send the Homag number 2-007-11-1280 or 2007111280 and a photo of the old roller; SHUNHONGYU supplies various woodworking machine parts.
• It fits the machine you already run. The feeding wheel is made for Homag Woodworking Machine, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Frequently Asked Questions

Will this roller fit my Homag edge bander?

Check your machine parts book for Homag number 2-007-11-1280 or 2007111280; if it is listed, the roller fits. Also measure the old roller to confirm 33 mm diameter, 12 mm bore, and 40 mm width.

What are the dimensions of the roller?

The roller measures 33 mm in diameter, 12 mm in bore, and 40 mm in width. Measure your old roller against these figures before ordering.

What material is the roller made from?

The roller is made of rubber with a steel core. The rubber face provides the grip that pulls workpieces into the machine.

How do I know when to replace the infeed roller?

Replace the roller when the rubber face looks glazed, smooth, or flat, or when workpieces start slipping at the infeed. A new 2007111280 restores the rubber grip.

Is there a minimum order quantity?

Contact SHUNHONGYU with the quantity you need; minimum order details are confirmed with your enquiry. Send the Homag number and a photo of the old roller.

How do I place an order?

Send an enquiry with the Homag number 2-007-11-1280 or 2007111280, the quantity, and a photo of the old roller. SHUNHONGYU will confirm the part and supply details.

Can you supply other Homag spare parts?

SHUNHONGYU supplies various woodworking machine parts. Send the part numbers you need with your enquiry and we will confirm availability.

What should I send with my enquiry?

Send the Homag number 2-007-11-1280 or 2007111280, the quantity required, and a photo of the old roller. This helps confirm the rubber infeed roller matches your machine.