4-086-05-0172 BUS Terminal EL3202 IN-2 PT100 Spares For Homag Machine 4086050172

This BUS terminal, model EL3202, is a Homag spare part for woodworking machines. It carries two PT100 sensor inputs and handles temperature signals on the machine's bus. The Homag number is 4-086-05-0172, also written 4086050172. It mounts as a bus terminal module. Before ordering, confirm your machine's wiring diagram lists EL3202 and that your existing terminal has two PT100 inputs. Send a photo of the old terminal and the machine's electrical schematic with your enquiry.

When a Homag machine loses temperature readings from its PT100 sensors, the bus terminal is often the first place to check. The EL3202 module handles two PT100 inputs, so a failure here can stop temperature monitoring on that section of the machine. Replacing the terminal restores the signal path.

This is a bus terminal module with model number EL3202. It carries two PT100 sensor inputs and connects to the machine's bus system. The Homag number 4-086-05-0172, or 4086050172, identifies it for Homag woodworking equipment. Buyers confirm fit by matching that number and checking the machine's wiring diagram for EL3202.

Check the terminal's wiring against the machine schematic before mounting. The EL3202 takes two PT100 inputs, so each sensor channel must land on the correct terminal points. In use, correct wiring keeps temperature readings stable; a loose or crossed connection shows up as a fault on that channel.

Supply runs through DHL, FedEx, UPS and similar carriers. No packing or customisation details are stated. When enquiring, send the Homag number 4-086-05-0172 or 4086050172, the model EL3202, and a photo of the existing terminal. That lets the supplier match the part to your machine. Supply comes from the same range as the rest of the catalogue.

What the specification fixes, and what it leaves to the machine:

• Temperature signal input — The EL3202 terminal carries two PT100 sensor inputs, so it handles temperature signals from two sensor points on the machine.
• Homag number match — Marked with Homag number 4-086-05-0172 or 4086050172, this terminal is identified for Homag woodworking machine spare parts.
• Model identification — The model number EL3202 appears on the terminal, giving a direct check against the machine's electrical documentation.
• Bus terminal function — As a bus terminal, it connects field wiring to the machine's bus system, carrying sensor data back to the control.
• Two-channel wiring — Each of the two PT100 inputs has its own terminal points, so a faulty sensor can be isolated to one channel during troubleshooting.
• Spare part role — Kept as a spare, this terminal replaces a failed unit without waiting for a full machine service call.
• Fit confirmation — Match the Homag number and the model EL3202 against the machine schematic before ordering to confirm compatibility.
• Shipment options — Delivery is by DHL, FedEx, UPS or similar carriers, so the terminal can reach the shop through standard courier routes.
• Wear point — The terminal's wiring connections are a wear point; check for loose screws or corrosion when temperature readings drift.

What changes on the shop floor when the right part goes back in:

• Restores temperature monitoring. A failed bus terminal can take out PT100 readings on the machine. Fitting the EL3202 brings those two sensor channels back into service.
• Number-based fit check. The Homag number 4-086-05-0172 and model EL3202 give two identifiers to match against the machine's wiring diagram before you order.
• Two inputs in one module. One EL3202 terminal covers two PT100 sensor inputs, so a single spare can serve either channel if one fails.
• Clear troubleshooting path. With two separate input channels, a technician can trace a temperature fault to one sensor or one wiring point instead of the whole circuit.
• Spare on the shelf. Keeping an EL3202 terminal in stores means a failed unit can be swapped out without waiting for a service visit to diagnose the fault.
• Courier delivery. Shipment by DHL, FedEx, UPS or similar means the terminal arrives through a tracked courier route rather than a specialist freight booking.
• Simple enquiry. Send the Homag number, model EL3202 and a photo of the old terminal, and the supplier can match the part without a long machine history.
• It fits the machine you already run. The EL3202 is made for woodworking machines, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Match the Homag number 4-086-05-0172 or 4086050172 and the model EL3202 against your machine's wiring diagram. A photo of the old terminal also helps confirm the fit before ordering.

It carries two PT100 sensor inputs and connects them to the machine's bus system. In use, it passes temperature signals from those sensors back to the control.

The terminal is a separate spare part, so you can replace it on its own. Check the PT100 sensors and wiring first, because a fault may sit at the sensor rather than the terminal.

Each of the two PT100 inputs has its own terminal points. Follow the machine's electrical schematic for the correct landing points and check each connection is tight.

Send the Homag number 4-086-05-0172 or 4086050172, the model EL3202, and a photo of the existing terminal. That gives the supplier enough to match the part.

Shipment is by DHL, FedEx, UPS or similar carriers. No packing details are stated, so ask the supplier about packing if your site has specific requirements.

No condition is stated for this terminal. Ask the supplier directly about the condition of the unit before you order.

Check the two PT100 input connections first, since a loose or crossed wire shows as a fault on that channel. If wiring is correct, test the sensor on the affected channel.