4-006-10-4224 Clamping Linear Guide LCP2505AK-10 Spares For Homag Machine

The 4-006-10-4224 Clamping Linear Guide LCP2505AK-10 is a clamping linear guide spare for Homag woodworking machines, also called a Clamping Element or CLAMPING LINEARFUEHRUNG. It carries model number 2031954481 or 2-031-95-4481 and is made of metal and plastic. Durable and precise, it sits in the machine's linear motion system. Before ordering, check the model number LCP2505AK-10 and the part number 4-006-10-4224 against the guide on your Homag machine, and confirm the mounting position.

When a Homag machine starts drifting on a clamped axis, the cause is often the clamping linear guide losing its grip. Play shows up as inconsistent cuts and repeated re-setting. Replacing the worn guide restores the clamping action the motion system needs to hold position.

This is a clamping linear guide, also called a clamping element or CLAMPING LINEARFUEHRUNG, model LCP2505AK-10, part number 4-006-10-4224. Metal and plastic construction. It fits Homag machines as a woodworking machine accessory. Confirm the fit by matching LCP2505AK-10, 4-006-10-4224, and 2031954481 or 2-031-95-4481 to the old part.

Before fitting, check the guide seat for wear and clean the mounting face so the new guide sits flat. Compare the old and new parts side by side at the mounting points. A correctly seated guide holds the clamp without play, so the axis stops moving once clamped.

Spares ship as single parts. SHUNHONGYU supplies various woodworking machine parts and asks buyers to contact them now. With your enquiry, send the model number LCP2505AK-10, the part number 4-006-10-4224, and the alternate number 2031954481 or 2-031-95-4481 so the correct guide is picked. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Clamp grip on the axis — The clamping linear guide holds the axis position once clamped, so the machine stops drifting between passes on Homag work.
• Model match check — Match model LCP2505AK-10 against the old guide before ordering; a mismatched model will not seat correctly on the machine.
• Part number cross-check — The number 4-006-10-4224 ties this guide to the Homag machine, and the alternate 2031954481 or 2-031-95-4481 helps confirm it.
• Metal and plastic build — Metal and plastic construction makes up the guide, so the clamping faces wear as a unit and are replaced as one spare.
• Wear point to watch — Watch the clamping faces for play; once the guide loses grip, cuts drift and the axis needs re-setting more often.
• Mounting face prep — Clean the mounting face before fitting the guide so it sits flat; a raised seat tilts the guide and adds play at the clamp.
• Seat inspection — Check the guide seat for wear before installation; a worn seat lets the new guide rock even when the clamp is engaged.
• Side-by-side fit check — Compare the old and new guide at the mounting points before assembly, so any difference in the clamp body shows up early.

What changes on the shop floor when the right part goes back in:

• Holds the clamp position. Once engaged, the guide keeps the axis from creeping, so cuts stay where the operator set them and re-setting between passes drops.
• Fit confirmed by number. Matching LCP2505AK-10 and 4-006-10-4224 to the old guide before ordering avoids a wrong part sitting on the shelf.
• Wear caught early. Checking the clamping faces for play lets you swap the guide before drift shows up in finished cuts and scrap rises.
• Flat seat, less play. Cleaning the mounting face before fitting keeps the guide seated flat, so the clamp engages without added movement.
• One unit to replace. Metal and plastic build as one guide means the worn clamp faces come off together and the new part goes straight on.
• Spare on the shelf. A spare guide for Homag machines keeps the axis running when the old clamp wears out mid-production instead of waiting.
• Clear enquiry path. Sending the model and both part numbers with your enquiry lets SHUNHONGYU match the guide to your Homag machine before shipping.
• It fits the machine you already run. The clamping element is made for Homag machines, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Check the model number LCP2505AK-10 and part number 4-006-10-4224 against the old guide on your machine. Match both numbers before ordering, and use the alternate 2031954481 or 2-031-95-4481 as a second cross-check.

2031954481 and 2-031-95-4481 are the two forms of the same model number for this guide. Either form identifies the same clamping linear guide, so quote whichever appears on your machine paperwork.

It goes by clamping linear guide, clamping element, or CLAMPING LINEARFUEHRUNG. All three names refer to the same spare for Homag machines, model LCP2505AK-10, part number 4-006-10-4224.

Metal and plastic make up the guide. The metal carries the clamping load and the plastic forms the guide faces, and the unit is replaced as one spare when the faces wear.

Play at the clamp and drift on the axis are the signs to watch. If the axis moves after clamping, or cuts need re-setting more often, inspect the guide faces and the seat.

Clean the mounting face and inspect the guide seat for wear first. A flat, clean seat lets the new guide sit correctly, while a worn seat adds play even with a new part.

Send the model LCP2505AK-10, the part number 4-006-10-4224, and the alternate 2031954481 or 2-031-95-4481. SHUNHONGYU supplies various woodworking machine parts and matches the guide from those numbers.

Ask SHUNHONGYU about quantity when you enquire. Include the model and part numbers with your request so the guides are matched to your Homag machine before supply is confirmed.