4008410096 Heating Cartridge Heating Element For Homag Adhesive Glue Pot

The 4-008-41-0096 heating cartridge is a spare part for Homag edgebanding machines. It is a heating tube, also called a heating rod, that melts glue in the adhesive glue pot. The Homag part number is 4-008-41-0096, also written 4008410096. Fitment is confirmed by matching this number to your machine's parts list or the old cartridge. Customization is supported. Other heating elements such as heating plates, thermocouples, and heating sensors are also available. The minimum order quantity is 10PCS.

When the glue pot stops melting adhesive evenly, the heating cartridge is often the cause. A failed cartridge leaves glue too cool to flow, causing weak bonds and edgebanding that lifts. Replacing the 4-008-41-0096 restores heat to the glue pot so adhesive reaches the temperature needed for a solid bond.

This heating cartridge is a heating tube, also known as a heating rod, used in Homag adhesive glue pots. It carries the Homag part number 4-008-41-0096, also written 4008410096. It is a spare part for woodworking edgebanding machines. Confirm fit by matching this part number to your machine's parts list or the number on the old cartridge.

Before installing, check the glue pot for hardened adhesive and clean the cartridge bore. The cartridge mounts in the glue pot and heats the adhesive for melting. A correct fit keeps heat transfer steady, so glue reaches the edge and board at a consistent temperature. A loose or dirty fit can slow melting and cause uneven glue flow.

Ordering is straightforward. Customization is supported, and the minimum order quantity is 10PCS. Other heating tubes for Homag machines are available, including 4-008-40-0130, 4-008-41-0297, and 4-008-41-0214. Send your machine model, the part number 4-008-41-0096, and the quantity you need with your enquiry.

What the specification fixes, and what it leaves to the machine:

• Glue pot heating — Heats the adhesive in the glue pot so glue melts and flows for edgebanding.
• Homag part match — Matches Homag part number 4-008-41-0096, also written 4008410096, for direct identification.
• Edgebander spare — Serves as a spare part for woodworking edgebanding machines that use a Homag glue pot.
• Heating tube form — Comes as a heating tube, also called a heating rod, for mounting in the glue pot.
• Customization option — Customization is supported, so you can request changes to suit your maintenance needs.
• Glue melting use — Designed for melting glue, keeping adhesive ready for edge application.
• Wear replacement — Replaces a failed cartridge when the glue pot no longer melts adhesive properly.
• Fit check by number — Confirm fit by matching 4-008-41-0096 to your machine's parts list or old cartridge.
• Other elements available — Heating plates, thermocouples, and heating sensors are also available for Homag machines.
• Minimum order — Minimum order quantity is 10PCS, suiting planned maintenance or stock.
• Fit — built for Woodworking Edge-banding Machine, in the position the original part occupied.
• Customisation — Supported.
• Direct replacement — the mounting point is unchanged, so no adapter, shim or re-machining is needed.

What changes on the shop floor when the right part goes back in:

• Restores glue pot heat. A failed cartridge stops melting glue; replacing it brings heat back so adhesive flows and bonds hold on the edge.
• Clear part identification. The Homag part number 4-008-41-0096, also 4008410096, lets you match the cartridge to your parts list before ordering.
• Fits Homag edgebanders. As a spare for woodworking edgebanding machines, it targets the glue pot area where adhesive is heated for edge application.
• Simple fit check. Match the number on the old cartridge or in the parts list to 4-008-41-0096 to confirm before you buy.
• Customization supported. If your maintenance plan needs a variation, customization is supported so you can discuss options with the supplier.
• Consistent melting. A correctly fitted cartridge keeps heat transfer steady, so glue reaches a consistent temperature for reliable edge bonds.
• Stock-friendly MOQ. With a minimum order of 10PCS, you can keep spares on hand and reduce downtime when a cartridge fails.
• It fits the machine you already run. The heating rod is made for Woodworking Edge-banding Machine, so it returns to the same shaft, bracket or spindle without re-machining the mounting.
• Downtime measured in minutes, not days. A replacement held on the shelf turns a worn part into a changeover instead of a stopped line.

Match the Homag part number 4-008-41-0096, also written 4008410096, to your machine's parts list or the number on the old cartridge.

The minimum order quantity is 10PCS, so plan your spares order around that quantity.

Yes, customization is supported; send your requirements with your enquiry to discuss options.

Other heating tubes include 4-008-40-0130, 4-008-41-0297, 4-008-41-0214, and others; ask for the full list.

Send your machine model, the part number 4-008-41-0096, and the quantity you need so the supplier can respond accurately.

This is a spare part identified by Homag part number 4-008-41-0096 for use in Homag adhesive glue pots.

It heats the adhesive so glue melts and flows for edgebanding, helping maintain the temperature needed for bonding.

Yes, heating plates, thermocouples, and heating sensors are also available for Homag machines.