3-601-14-0220 HUB SECHSKANTKUPPLUNG - Woodworking Machine Tools For Homag

The 3-601-14-0220 HUB SECHSKANTKUPPLUNG is a hexagonal coupling hub for Homag woodworking machines. It measures 24*41mm with a height of 41mm and a countersink diameter of 17mm, and it is made of metal. Before ordering, confirm the fit by matching these dimensions and the 3-601-14-0220 / 3601140220 model number to the part you are replacing.

When the hexagonal coupling hub wears, the machine loses drive alignment and the spindle or feed can slip under load. Replacing the worn hub restores the connection between the shaft and the coupling, so the machine runs without the vibration and missed steps that come from a loose fit. This hub is the direct replacement for the worn or damaged original.

The 3-601-14-0220 HUB SECHSKANTKUPPLUNG is a metal hub with a 24*41mm size, a 41mm height, and a 17mm countersink diameter. It fits Homag machines as a spare part for woodworking machine tools. A buyer confirms the fit by checking the model number 3-601-14-0220 / 3601140220 against the machine's parts list and measuring the old hub.

Check the shaft and the mating coupling for wear before mounting. The 17mm countersink diameter must match the screw head, and the 41mm height sets how the hub sits in the assembly. A correct fit keeps the hexagonal drive engaged and prevents the hub from working loose during cutting or feed cycles.

Supply comes as the hub only; no packaging or customisation details are stated, so ask before ordering if you need either. Send the model number 3-601-14-0220 / 3601140220, the 24*41mm size, and a photo of the old part with your enquiry. That lets the supplier check the metal hub and the 17mm countersink against your order.

What the specification fixes, and what it leaves to the machine:

• Direct replacement for Homag machines — The 3-601-14-0220 HUB SECHSKANTKUPPLUNG is made for Homag woodworking machines, so it replaces the worn hub without adapting the surrounding assembly.
• Hexagonal drive engagement — The hexagonal shape of the hub engages the coupling to transmit drive; a worn hex profile causes slip, and this hub restores the original fit.
• Overall size 24*41mm — At 24*41mm, the hub matches the space in the coupling assembly; check this size against the old part before ordering.
• 41mm height for seating — The 41mm height sets how the hub seats in the machine; a hub that is too tall or too short will not align the coupling correctly.
• 17mm countersink diameter — The 17mm countersink diameter must match the screw head used to secure the hub; confirm this measurement on the old part.
• Metal construction — Made of metal, the hub resists the wear that comes from continuous drive loads in woodworking machinery and holds its shape.
• Model number 3-601-14-0220 / 3601140220 — Both numbers 3-601-14-0220 and 3601140220 identify this hub, so you can match either format when checking the parts list.

What changes on the shop floor when the right part goes back in:

• Restores drive alignment. A worn hub lets the coupling shift, which shows up as vibration or missed feed steps. Fitting the 3-601-14-0220 hub brings the hex drive back to its original position.
• One part number to match. The hub carries both 3-601-14-0220 and 3601140220, so you can check either format against the parts list and avoid ordering the wrong spare.
• Dimensions you can measure. With a 24*41mm size, 41mm height, and 17mm countersink, the hub can be checked against the old part with a caliper before you commit to the order.
• Metal hub for repeat loads. The metal body holds the hex profile under continuous drive load, so the coupling stays engaged through cutting and feed cycles instead of loosening.
• Fits Homag machines. Made for Homag woodworking machines, the hub goes into the existing coupling assembly without adapters, which keeps the repair to a direct swap.
• Clear wear inspection. The hex and bore are the working surfaces; checking them on the old hub tells you whether the coupling problem is the hub or the mating shaft.
• Simple enquiry process. Send the model number, the 24*41mm size, and a photo of the old hub; the supplier can then check the metal hub and 17mm countersink against your order.

Check the model number 3-601-14-0220 / 3601140220 against your machine's parts list and measure the old hub. The 24*41mm size, 41mm height, and 17mm countersink must match what you are replacing.

The hub measures 24*41mm with a height of 41mm and a countersink diameter of 17mm. These are the dimensions to compare with the old part before ordering.

The hub is made of metal. That is the material stated for this part, and it is the working surface that carries the hex drive load.

Measure the screw head that secures the old hub and compare it with the 17mm countersink diameter. If the head does not match, the hub will not seat correctly.

Send the model number 3-601-14-0220 / 3601140220, the 24*41mm size, and a photo of the old hub. That lets the supplier check the metal hub and the 17mm countersink against your order.

No packaging or customisation details are stated for this hub. Ask the supplier directly if you need either before placing the order.

Inspect the hex profile and the bore on the old hub for rounding or looseness. Wear at either point lets the coupling shift, which shows as vibration or missed drive.

Check the shaft and mating coupling for wear before mounting the new hub. A worn shaft will not hold the new hub in alignment even if the hub itself is correct.