2-031-95-6510 GEAR MIT POLYGONEINSATZ DB 32 LI-VERZ 2031956510 Left Drive Gear Wheel

The 2-031-95-6510 Left Drive Gear Wheel is a metal spare part for Homag woodworking machines. It fits as the left-side drive gear with sleeve, part number 2031956510. The right-side counterpart is 2031956500. Before ordering, confirm your machine's parts book shows 2-031-95-6510 or 2031956510 for the left drive position. The gear is new and made of metal. Buyers should send the machine model and the part number from the old gear when enquiring.

When a Homag machine starts slipping, jumping, or losing drive on the left side, the left drive gear wheel is often the first place to look. A worn gear with sleeve can stop transmitting power cleanly, disrupting the feed and risking damage to other drive components.

This is the left drive gear wheel with sleeve, part number 2-031-95-6510, also shown as 2031956510. It is made of metal and fits Homag woodworking machines. To confirm fit, check the parts book or the old gear for 2-031-95-6510 or 2031956510 and confirm it is the left-side position; the right-side part is 2031956500.

Check the sleeve and gear teeth for wear, then mount the new gear in the left drive position. A correct left gear with sleeve restores the drive path on that side, so the machine can transmit power as intended. Confirm rotation and alignment against the old part before running production.

Supply is straightforward: the gear is new and made of metal. No packing or customisation details are stated, so confirm those with the supplier. Send the machine model, the part number 2-031-95-6510 or 2031956510, and a photo of the old gear with your enquiry. Supply comes from the same range as the rest of the catalogue.

What the specification fixes, and what it leaves to the machine:

• Left-side drive position — Fits the left drive position on Homag woodworking machines, matching part number 2-031-95-6510 and 2031956510 for that side.
• Right-part distinction — The right-side counterpart is 2031956500; check which side you need before ordering to avoid fitting the wrong gear.
• Metal construction — Made of metal, the gear is built for the drive loads in a Homag woodworking machine's power transmission path.
• Sleeve included — Supplied as a left drive gear wheel with sleeve, so the sleeve is part of the assembly rather than a separate item.
• Wear check point — Inspect the gear teeth and sleeve for wear; a worn left gear can cause slipping or loss of drive on that side.
• Fit confirmation — Confirm the fit by matching 2-031-95-6510 or 2031956510 against the parts book or the number on the old gear.
• New condition — Each gear is new, so you are replacing a worn part with an unused one rather than reworking the old gear.
• Drive path role — This gear transmits power from the motor to the machine components, helping move workpieces through cutting or shaping.
• Installation check — Before running production, check rotation and alignment against the old gear to confirm correct mounting in the left position.

What changes on the shop floor when the right part goes back in:

• Restores left-side drive. Fitting the correct left gear with sleeve brings the left drive path back into service, so the machine can transmit power as intended instead of slipping.
• Clear left/right choice. Part numbers 2-031-95-6510 and 2031956500 separate left from right, which reduces the chance of ordering and fitting the wrong-side gear.
• Metal gear for drive loads. A metal gear suits the power transmission role in a Homag woodworking machine, where the drive gear carries load from the motor to the machine components.
• Sleeve comes with the gear. Because the sleeve is included with the left drive gear wheel, you replace the assembly as one item and avoid sourcing the sleeve separately.
• Simple fit check. Matching 2-031-95-6510 or 2031956510 to the parts book or old gear gives a direct confirmation before you commit to the order.
• New part, no rework. A new gear removes the need to rework a worn one, so the left drive position can be returned to service with an unused metal component.
• Enquiry-ready details. Sending the machine model, the part number, and a photo of the old gear with your enquiry helps the supplier confirm you receive the correct left-side part.

The left gear is 2-031-95-6510 or 2031956510; the right-side part is 2031956500. Check the number on your old gear and the parts book to confirm the left position before ordering.

Fit depends on your machine showing 2-031-95-6510 or 2031956510 for the left drive position. Confirm against the parts book or the old gear, and send your machine model with the enquiry.

The gear is made of metal. That is the stated material for this left drive gear wheel with sleeve.

Yes, it is supplied as a left drive gear wheel with sleeve. The sleeve is part of the assembly, not a separate item in this part number.

Yes, the condition is new. You are ordering an unused metal gear for the left drive position.

Check the gear teeth and sleeve for wear, then confirm rotation and alignment against the old gear. Mount it in the left drive position and verify before running production.

Send the machine model, the part number 2-031-95-6510 or 2031956510, and a photo of the old gear. Ask about packing and customisation, since those details are not stated.

A worn left gear can slip or lose drive on that side, disrupting the feed and risking damage to other drive components. Replacing it with the correct new gear restores the left drive path.