ZCMD21C12 Limit switches - 4-008-32-0801 Spares for Homag Woodworking Machine

This ZCMD miniature limit switch body (spare 4-008-32-0801) fits Homag woodworking machines. It is a fixed-body switch in the Telemecanique XC Standard range, series Standard Format, device short name ZCMD. The body takes one of the ZCE66, ZCEF2, ZCE14, ZCE62, ZCE06, ZCE09, ZCE21, ZCE28, ZCE27, ZCE64, ZCE65, ZCEG1, ZCE10, ZCE11, ZCE01, ZCE29, ZCE67, ZCE24, ZCE07 or ZCE13 heads. Confirm fit by matching the old body's ZCMD mark and the head code on your machine before ordering.

When a Homag machine stops indexing or fails to hold a position, a worn limit switch body is often the cause. The ZCMD21C12 body (spare 4-008-32-0801) replaces the switch that signals end of travel on moving carriages, clamps and fences. A failed body gives no signal, so the control waits or faults out, and production stops until the switch is changed.

This is a miniature, fixed-body limit switch in the Telemecanique XC Standard range, series Standard Format, device short name ZCMD. It fits Homag woodworking machines that use ZCMD bodies. To confirm the fit, read the old body: it must carry the ZCMD mark, and the head on your machine must match one of the ZCE66, ZCEF2, ZCE14, ZCE62, ZCE06, ZCE09, ZCE21, ZCE28, ZCE27, ZCE64, ZCE65, ZCEG1, ZCE10, ZCE11, ZCE01, ZCE29, ZCE67, ZCE24, ZCE07 or ZCE13 codes.

Check the actuator head and the mounting holes on the old unit before you order. The body is fixed, so it mounts in the same position as the original, and the head you fit must be one of the ZCE codes above.

Supply is the bare switch body. No packaging, customisation, price or lead time is stated here. Send the machine model, the old body's ZCMD mark and the head code with your enquiry, and ask for the body under spare number 4-008-32-0801 or SKU 4-008-32-0259.

What the specification fixes, and what it leaves to the machine:

• Replacing a worn travel switch — Use this ZCMD body when the old switch no longer signals end of travel on a Homag machine.
• Miniature body for tight mounts — The miniature fixed body fits where space around the carriage or fence is limited.
• XC Standard range fit — Belongs to the Telemecanique XC Standard range, series Standard Format, so it matches machines built around that range.
• Head matching before order — The body accepts ZCE66, ZCEF2, ZCE14, ZCE62, ZCE06, ZCE09, ZCE21, ZCE28, ZCE27, ZCE64, ZCE65, ZCEG1, ZCE10, ZCE11, ZCE01, ZCE29, ZCE67, ZCE24, ZCE07 or ZCE13 heads.
• Fixed mounting position — A fixed body mounts in the original position, so the trip point stays where the machine expects it.
• Spare number check — Match spare 4-008-32-0801 or SKU 4-008-32-0259 against the old unit before ordering.
• ZCMD device mark — The ZCMD short name on the old body is the quick check that this replacement belongs on your machine.
• Head code on the machine — Read the head code on the old switch; it must appear in the ZCE list for this body to work.
• One body per switch point — Each body serves one switch point, so count the failed points on the machine before you order.

What changes on the shop floor when the right part goes back in:

• Get the machine moving again. A failed limit switch body stops the cycle, so replacing it with the correct ZCMD body restores the travel signal and lets the machine run.
• Fit checked at the machine. Reading the ZCMD mark and the ZCE head code on the old unit before ordering avoids a wrong body and a second shutdown.
• Repeatable trip point. The fixed body mounts in the original position, so the switch trips at the same point every cycle and the machine's stop or reverse action stays consistent.
• Works in tight spaces. The miniature body fits where a larger switch will not, which matters around carriages, clamps and fences on Homag machines.
• One range, fewer mistakes. Because the body belongs to the Telemecanique XC Standard range, series Standard Format, buyers who already run that range can match it by sight.
• Order by the right number. Using spare 4-008-32-0801 or SKU 4-008-32-0259 in your enquiry keeps the order tied to the exact body you need.
• Clear enquiry, faster answer. Sending the machine model, ZCMD mark and head code with your enquiry gives the supplier what is needed to confirm the body.

Only if your machine uses a ZCMD body and the head on it is one of the ZCE codes listed. Check the old body for the ZCMD mark and read the head code before ordering.

Read the old switch body and head. The body must carry the ZCMD mark, and the head code must match one of the ZCE66, ZCEF2, ZCE14, ZCE62, ZCE06, ZCE09, ZCE21, ZCE28, ZCE27, ZCE64, ZCE65, ZCEG1, ZCE10, ZCE11, ZCE01, ZCE29, ZCE67, ZCE24, ZCE07 or ZCE13 codes.

Quote spare 4-008-32-0801 or SKU 4-008-32-0259. Either number identifies the ZCMD21C12 limit switch body for Homag woodworking machines.

The body is supplied on its own. The associated head is not included unless you ask for it, so order the ZCE head separately if you need one.

ZCMD is the device short name for this miniature fixed limit switch body. If the old body carries that mark, this replacement is the same body type.

It is intended for Homag woodworking machines that use ZCMD bodies. For any other machine, check the old body's marks and head code first.

Send the machine model, the ZCMD mark from the old body and the head code. That lets the supplier confirm the body before you order.

Order one body for each failed switch point. Count the points that no longer signal on the machine, then order that many bodies.