2-026-92-4781 Bearing Support Poly-V-L8 Bearing Seat For Homag Saw Machine

This is a black original bearing support, also called a bearing seat, with the POLY-V-L8 designation and Homag part number 2-026-92-4781 or 2026924781. It fits HOMAG HOLZMA WEEKE main saw machines. The part supports the bearing that carries the saw blade arbor. Check the part number on your old seat or machine manual to confirm fit. It is a woodworking machine spare part for the main saw. Send your machine model and the old part number when you enquire.

When the main saw bearing seat wears, blade vibration shows up as a rough cut and the arbor no longer runs true. The 2-026-92-4781 bearing support holds the bearing in line so the saw blade keeps its position. Replacing a worn seat removes that play before it reaches the cut.

This is a black bearing support with the POLY-V-L8 designation, supplied as an original part. It fits HOMAG HOLZMA WEEKE main saw machines. To confirm the fit, read the Homag part number on the old seat: 2-026-92-4781 or 2026924781. Match it before ordering.

Check the bearing seat bore and the mounting face for wear before fitting. The seat must sit flat so the bearing runs square to the arbor. A square seat keeps the blade aligned and limits vibration in the cut. Torque the mounting fasteners to the machine maker's figures.

Supply is for the bearing support as a spare part. SHUNHONGYU supplies various woodworking spares, including Biesse, Homag and SCM machine parts, CNC woodworking tools, edgebander parts and CNC panel beam saw parts. Send your machine model, the old part number and a photo of the seat with your enquiry. Supply comes from the same range as the rest of the catalogue.

What the specification fixes, and what it leaves to the machine:

• Blade arbor support — The bearing seat carries the saw arbor bearing so the blade stays in line during the cut on the main saw.
• Part number match — The seat carries Homag part number 2-026-92-4781 or 2026924781 for matching against your machine records.
• POLY-V-L8 fit — The POLY-V-L8 designation identifies the bearing support type so you can compare it with the seat on your machine.
• Original part — Supplied as an original bearing support, so the seat replaces the worn unit without adapting the mounting.
• Black finish — The black bearing support is a direct replacement seat for the HOMAG HOLZMA WEEKE main saw machine.
• Wear point — The bearing seat is a wear point; replacing a worn seat removes play between the bearing and its housing.
• Mounting face — The seat mounts against the machine frame, so its face must sit flat to keep the bearing square to the arbor.
• Vibration control — A seated bearing holds the arbor steady, which limits vibration that shows up as marks on the cut edge.
• Durability — The bearing support is built for the load of the main saw arbor, so it holds the bearing in position through the cut.

What changes on the shop floor when the right part goes back in:

• Cuts arbor play. A worn bearing seat lets the arbor move, and that movement reaches the cut. Fitting the 2-026-92-4781 support restores a fixed bearing position on the main saw.
• Keeps the blade in line. The bearing support holds the bearing square to the arbor, so the blade stays where it was set. That reduces the sideways movement that marks a panel edge.
• Simple number check. You confirm the fit by matching 2-026-92-4781 or 2026924781 against the old seat or the machine manual before you order, so the wrong seat stays out of your stores.
• One seat, one machine. The bearing support is made for HOMAG HOLZMA WEEKE main saw machines. That focus means the mounting and the bearing location match the machine it comes off.
• Fewer vibration marks. A bearing held square in its seat runs with less vibration. On the saw, that means a cleaner cut edge and less time spent on rework after the saw.
• Wear part on the shelf. The bearing seat is a wear point on the main saw. Keeping a spare 2-026-92-4781 on the shelf cuts the wait when the old seat shows play.

It fits HOMAG HOLZMA WEEKE main saw machines. The bearing support is a spare part for the main saw, and the Homag part number is 2-026-92-4781 or 2026924781.

Read the number on the old bearing seat and match it to 2-026-92-4781 or 2026924781. If the old seat is unmarked, check the machine manual or send a photo of the seat with your enquiry.

Yes, it is supplied as an original bearing support. The seat is black and carries the POLY-V-L8 designation for the HOMAG HOLZMA WEEKE main saw machine.

POLY-V-L8 is the designation for this bearing support type. Use it together with the Homag part number 2-026-92-4781 or 2026924781 when you check the seat against your machine.

Replace the seat when the bearing shows play in its housing or the cut edge shows vibration marks. A worn seat no longer holds the bearing square to the arbor on the main saw.

Check the seat bore and the mounting face for wear, and make sure the seat sits flat. A flat seat keeps the bearing square to the arbor, which keeps the blade aligned in the cut.

Send the machine model, the old part number and a photo of the bearing seat. That lets the supplier check the 2-026-92-4781 bearing support against your HOMAG HOLZMA WEEKE main saw.

Yes, SHUNHONGYU supplies various woodworking spares, including Biesse, Homag and SCM machine parts, CNC woodworking tools, edgebander machine parts and CNC panel beam saw parts.