Woodworking Machine Spare Parts - Edgebander Dust Hood Plastic Dust Collector

This is a red plastic dust hood for an edgebander, used to capture chips at the cutting or trimming station. It measures 250mm long with a 68mm diameter and is supplied in left and right directions. The plastic body is light weight and durable for daily shop use. Before ordering, measure your existing hood's 250mm length and 68mm diameter, and confirm whether your machine needs the left or right orientation.

When the dust hood on an edgebander wears through or cracks, chips escape at the trimming station and pile up around the cutterhead. That buildup pulls maintenance time and leaves a mess on fresh panels. A replacement hood restores capture at the source. This hood fits the left and right sides, so you can match the side that failed without changing the other.

The dust collector is made from red plastic and measures 250mm in length with a 68mm diameter. It mounts on edgebanding machines as a spare for the dust extraction point. Because fit varies by machine model, confirm your existing hood's 250mm length and 68mm diameter before ordering.

Check the mounting collar and the hose connection on your machine before installing. The 68mm diameter must match the port, and the 250mm length must clear the cutterhead guard. A correct fit keeps the hood seated so chips enter the airstream instead of falling onto the panel. The light weight plastic reduces load on the mounting point.

The hood is supplied in left and right directions, with one pair equal to 2pcs. No packaging or customisation details are stated. When enquiring, send the machine make and model, the side you need, and the 250mm length and 68mm diameter of your existing hood. Photos of the mounting area help confirm the fit before you commit to an order.

What the specification fixes, and what it leaves to the machine:

• Left and right fitment — Supplied in left and right directions so you can replace the failed side without ordering the opposite side.
• Wear point at the trim station — The red plastic body takes the chip impact at the trimming station, protecting the mounting area from constant debris.
• Length clearance — At 250mm long, the hood reaches from the mounting point to the cutterhead guard, keeping the extraction path covered.
• Diameter match — The 68mm diameter connects to the dust port, so the hose collar seats without an adapter.
• Light weight handling — Light weight plastic makes the hood easy to lift into place during changeover and reduces stress on the mounting screws.
• Durable plastic construction — Durable plastic resists the daily wear from wood chips and dust that erodes softer hood materials over time.
• Direction check before install — Check the left or right direction against your machine before fitting, because the hood is shaped to sit on one side.
• Edgebander spare fit — As an edgebander spare, the hood replaces the original dust collector when the old one cracks or loses its shape.
• Hose connection check — Confirm the 68mm diameter against your hose end, since a loose connection lets chips escape at the joint.

What changes on the shop floor when the right part goes back in:

• Keeps chips out of the trim area. A seated hood captures chips at the source instead of letting them pile around the cutterhead, which cuts cleanup time between runs.
• Matches the original mounting point. The 250mm length and 68mm diameter let the hood fit the existing port and guard, so you avoid drilling new holes.
• Reduces machine downtime. Keeping a left and right hood on the shelf means a cracked hood does not stop the line while you wait for a replacement.
• Light weight eases changeover. The plastic body weighs little, so one person can fit the hood without support, which shortens the swap.
• Protects panel surfaces. Captured chips stay off fresh edgebanded panels, reducing rework from dust pressed into the glue line.
• Simple direction check. Because the hood is supplied left and right, you match the side that failed and leave the working side untouched.
• Clear enquiry process. Sending your machine model, side, and the 250mm by 68mm dimensions lets the supplier confirm fit before you order.
• It fits the machine you already run. The dust collector is made for Edgebander Spare, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Check the 250mm length and 68mm diameter against your existing hood and confirm the left or right side. Fit depends on your machine model, so measure before ordering.

One pair equals 2pcs, covering left and right. If only one side failed, you can still order the pair and keep the spare on the shelf.

Red plastic. The light weight and durable plastic body suits daily edgebander use and resists wear from wood chips.

Look at the failed hood's position on the machine. The hood is supplied in left and right directions, so match the side that cracked or wore through.

The hood has a 68mm diameter. Measure your hose end and the machine port to confirm the 68mm diameter matches before fitting.

Yes, if the 68mm diameter and 250mm length match your mounting point. Check the collar and hose connection, then seat the hood on the correct side.

Send the machine make and model, the side you need, and the 250mm length and 68mm diameter of your existing hood. Photos of the mounting area help confirm fit.

No packaging or customisation details are stated. Ask the supplier directly if you need specific packing or a modified hood.