Edge Banding Machine Spare Parts 4V210-08 Electromagnetic Solenoid Valve

A 4V210-08 solenoid valve in white, AC operated, for edge banding machines. It controls air flow to the pneumatic actuators that clamp and trim edges. The valve mounts on the machine's manifold; confirm fit by matching the model number 4V210-08 and AC voltage to the existing coil. This spare part replaces a failed valve that causes erratic clamping or trimming. Buyers should check port size and coil voltage before ordering. The valve is a direct replacement for the 4V210-08 series.

When the solenoid valve on an edge banding machine fails, the pneumatic clamps and trimming units lose timing. Edges clamp unevenly, trim cuts drift, and the machine may stop mid-cycle. Replacing the valve restores the air control that keeps the clamping and trimming sequence consistent.

The 4V210-08 is a white electromagnetic solenoid valve operating on AC. It fits edge banding machines that use the 4V210-08 series for air control. To confirm fit, check the model number on the old valve body and match the coil voltage to the AC supply. The valve is a spare part for edgebander pneumatic systems.

Before mounting, check the port size and coil voltage against the old valve. The valve mounts on the machine's air manifold or bracket; secure it and connect the air lines. Correct mounting ensures the valve switches air at the right moment, keeping the clamp and trim cycle repeatable.

Supply comes as the valve only; packing and customisation are not stated. Send the machine model, the old valve's model number 4V210-08, and the coil voltage with your enquiry. That lets the supplier confirm the AC version matches your machine before shipping. Supply comes from the same range as the rest of the catalogue.

What the specification fixes, and what it leaves to the machine:

• Air control for edgebander clamping — The 4V210-08 valve switches air to the clamping units so edges stay pressed during the glue and trim cycle.
• Coil voltage match — AC operation means the coil must match the machine's AC supply; check the old coil label before ordering.
• Model number fit check — Match the 4V210-08 number on the old valve body to confirm the replacement fits the manifold.
• White body visibility — The white body makes the valve easy to spot during routine inspection on a dark machine frame.
• Manifold mounting — The valve mounts on the machine's air manifold or bracket; secure it to avoid air leaks at the ports.
• Port size check — Confirm the port size on the old valve matches the new one before connecting air lines to avoid mismatch.
• Electromagnetic operation — The electromagnetic coil shifts the valve spool to direct air flow when the machine signals a clamp or trim action.
• Spare part for edgebander — Keep a spare 4V210-08 on hand to reduce downtime when the original valve fails mid-shift.
• AC coil compatibility — The AC coil is suited to machines wired for AC control; verify the supply voltage before installation.

What changes on the shop floor when the right part goes back in:

• Restores clamp timing. A failed valve makes clamps fire late or not at all; fitting a new 4V210-08 brings the clamping sequence back to its normal rhythm.
• Cuts diagnostic time. When edges clamp unevenly, the valve is a known wear point; swapping it with a 4V210-08 removes one variable fast.
• Keeps trim cuts consistent. The valve controls air to the trimming units; stable air switching means the trim cut repeats at the same point on each panel.
• Simple fit check. Matching the 4V210-08 model number and AC coil voltage to the old valve confirms fit without measuring the manifold.
• Reduces mid-shift stops. A spare valve on the shelf means a failed 4V210-08 does not idle the edgebander while a replacement is ordered.
• White body for inspection. The white valve body stands out on the machine, so a leaking or sticking valve is easier to find during checks.
• Direct replacement. The 4V210-08 is a direct replacement for the same model; no adapter is needed when the old valve is the same series.
• It fits the machine you already run. The 4v210-08-ac22ov is made for Edgebander Spare, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Check the model number on your old valve: if it reads 4V210-08 and the coil is AC, this valve is the replacement. Also confirm the port size matches.

It is an AC valve; match the coil voltage to your machine's supply before ordering. The old coil label gives the voltage.

Clamping and trimming become erratic: edges may clamp unevenly, trim cuts drift, or the machine stops mid-cycle. Replacing the valve restores air control.

The model number is 4V210-08; confirm the number on the valve body matches your old unit. The valve is a spare part for edgebander pneumatic systems.

This is a complete valve; the coil is part of the assembly. Replace the whole valve if the coil or spool fails.

Send the machine model, the old valve's model number 4V210-08, and the coil voltage. That lets the supplier confirm the AC version matches.

Packing details are not stated; ask the supplier for packing information with your enquiry. The valve is supplied as the part only.

Customisation is not stated; ask the supplier directly. The standard part is the 4V210-08 AC valve in white.