Steel Glue Pot Base Woodworking Machine Spare Parts For Edge Banding Machine

A steel glue pot base for edge banding machines, made by Shunhongyu. It weighs 1 kg and mounts under the glue pot to hold it steady. Use it as a spare when the original base cracks or loosens and the pot no longer sits flat. Before ordering, measure the pot seat and mounting holes on your edgebander and compare them to this base. The base is steel, so it resists the heat and glue that build up around the pot area. Send a photo of your current base with your enquiry.

When the glue pot base loosens or cracks, the pot sits unevenly. Glue flow becomes inconsistent, and the edge banding line may leave gaps or excess glue. Replacing the base restores a flat seat for the pot, so the machine can run without the pot shifting during heating and feeding.

This is a steel glue pot base for edge banding machines. It weighs 1 kg and carries the Shunhongyu brand. It is a spare part for the glue pot area, not a complete pot assembly. To confirm fit, remove your existing base and compare the mounting hole pattern, overall outline, and pot seat dimensions with this base.

Check the mounting holes on the machine frame and the seat where the pot rests. The base must sit flat so the pot stays level. A level pot keeps the glue at the correct depth around the roller, which helps maintain consistent glue pickup. Tighten the mounting bolts evenly to avoid distorting the base.

Each base is packed as one steel unit weighing 1 kg. Customisation is not stated, so order the standard part. When you enquire, send the machine make and model, a photo of the old base with a ruler across the mounting holes, and the quantity you need. That lets the supplier check the fit before you commit.

What the specification fixes, and what it leaves to the machine:

• Pot seating surface — The base provides a flat steel seat for the glue pot, so the pot stays level during heating and feeding.
• Mounting hole pattern — Holes in the base match the machine frame; check them against your old base before ordering.
• Steel construction — Steel resists the heat and glue buildup around the pot area better than softer materials.
• 1 kg weight — At 1 kg, the base adds steady mass under the pot without adding unnecessary load to the frame.
• Edgebander fit — This base is a spare for edge banding machines; confirm your model before purchase.
• Wear point — The pot seat is a wear point; replacing the base restores a flat surface when the old one distorts.
• Installation check — Compare the outline and hole spacing with the old base; a match means it mounts without modification.
• Glue depth control — A level pot seat helps keep glue depth consistent around the roller, reducing uneven pickup.
• Brand Shunhongyu — The base is marked Shunhongyu, so you can match it to existing Shunhongyu parts on your machine.
• Spare part role — Keep a spare base on hand so a cracked or loosened base does not stop the edge banding line.

What changes on the shop floor when the right part goes back in:

• Restores a level pot seat. A flat base keeps the glue pot level, so glue depth around the roller stays consistent and edge banding results are more even.
• Steel handles the heat. Steel construction resists the heat and glue buildup near the pot, so the base holds its shape through repeated heating cycles.
• Easy fit check before you buy. Compare the hole pattern and outline with your old base; a match means you can mount it without drilling or modification.
• 1 kg steady mass. The 1 kg weight gives the base enough mass to sit firmly under the pot without adding unnecessary load to the machine frame.
• Cuts downtime from a worn base. When the old base cracks or loosens, a replacement base gets the pot back to a flat seat and the line running again.
• Simple installation. Bolt the base to the frame and check that the pot sits level; even tightening avoids distorting the steel base.
• Spare-part availability. Keeping a Shunhongyu base in stock means a damaged base does not leave the edge bander idle while you wait for a part.

Check the mounting hole pattern and pot seat dimensions against your old base. Measure the hole spacing and outline, then compare with this base before ordering.

The base is steel. Steel resists heat and glue buildup around the pot area and holds its shape through repeated heating cycles.

The base weighs 1 kg. That weight gives it steady mass under the pot without adding unnecessary load to the machine frame.

No, this is the glue pot base only. It is a spare part that supports the pot; the pot and other components are not included.

Bolt the base to the machine frame and check that the pot sits level. Tighten the bolts evenly to avoid distorting the steel base.

Customisation is not stated for this part. Order the standard Shunhongyu base and confirm fit with your machine details before purchase.

Send the machine make and model, a photo of the old base with a ruler across the mounting holes, and the quantity you need.

Each base is packed as one steel unit weighing 1 kg. No other packaging details are stated, so ask the supplier if you need specifics.