20X225 20X250 Stainless Steel Pneumatic Cylinder Woodworking Machinery Tools

A stainless steel pneumatic cylinder for woodworking machines, available in two stroke lengths: 20X225 and 20X250. The 20MM core and stainless body suit repeated rod movement on clamps, stops and feed units. Before ordering, measure your existing cylinder's bore, stroke and mounting pattern, then match it to 20X225 or 20X250. The 20X250 version is the longer stroke of the two. Confirm port size and thread on your machine before fitting.

When a clamp cylinder on a woodworking machine starts to stick or leak, the machine stops indexing correctly and parts come out of position. Replacing the cylinder with the correct stroke length restores repeatable clamping pressure. This cylinder is offered in 20X225 and 20X250 to cover two common stroke requirements on shop-floor equipment.

This is a stainless steel pneumatic cylinder with a 20MM core, sized 20X225 and 20X250. It is a machine spare part for woodworking machinery. To confirm fit, measure the bore, the stroke you need (225 or 250) and the mounting hole spacing on your existing cylinder before matching it to one of the two sizes.

Check the rod thread and port threads against your air line fittings, and confirm the mounting pattern lines up with the bracket on your machine. A cylinder that matches these details mounts without adapters. Once fitted, the stainless body resists the moisture and dust common around woodworking equipment.

Each cylinder ships in a standard export package. No customisation is offered beyond the two listed sizes, 20X225 and 20X250. When you enquire, send the stroke you need, the 20MM core size, your mounting hole spacing and a photo of the old cylinder so the correct size can be confirmed.

What the specification fixes, and what it leaves to the machine:

• Clamp and stop actuation — Use the 20X225 or 20X250 cylinder where a woodworking machine needs repeatable clamping or stopping movement on each cycle.
• Stroke choice for fixture travel — Two stroke lengths, 225 and 250, let you match rod travel to the fixture instead of adding spacers or adapters.
• Stainless body in dusty shops — The stainless steel body suits woodworking environments where dust and moisture are present around moving parts.
• 20MM core fit check — The 20MM core is the bore reference; measure your existing cylinder bore before ordering to confirm the match.
• Mounting pattern verification — Compare the mounting hole spacing on your bracket with the cylinder base before fitting to avoid rework.
• Rod thread and port match — Check rod thread and port threads against your clevis and air fittings so the cylinder connects without adaptation.
• Replacement for worn cylinders — Fit as a direct replacement when a clamp or stop cylinder on the machine no longer holds position or leaks.
• Standard export packing — Each cylinder is packed in a standard export package for shipment to your workshop or stores.
• Two-size stock reference — Order by the size code, 20X225 or 20X250, so the stroke length is clear on the purchase order.

What changes on the shop floor when the right part goes back in:

• Two strokes cover common fixtures. Having both 225 and 250 stroke options means you can match the cylinder to the fixture travel on your machine without modifying the bracket or adding spacers.
• Stainless body suits wood dust. Woodworking shops produce dust and moisture; a stainless steel body gives the cylinder a surface that stands up to that environment better than a painted body.
• Measure once, order the right size. Checking bore, stroke and mounting pattern before ordering prevents the downtime that comes from fitting a cylinder that does not line up with your bracket.
• Clear size code on the order. Using 20X225 or 20X250 on the purchase order removes ambiguity about stroke length and helps your stores team pick the correct spare.
• Fits maintenance stock planning. As a machine spare part, keeping one of each stroke on the shelf reduces waiting when a clamp cylinder fails during a production run.
• Direct replacement saves fitting time. When bore, stroke and mounting match, the cylinder mounts without adapters, so the machine is back in production sooner after a failure.
• Export packing protects the rod. Standard export package protects the cylinder and rod during transport, so it arrives ready to fit rather than needing straightening or cleaning.

Measure the stroke of your existing cylinder. If the rod extends about 225, order 20X225; if it extends about 250, order 20X250. Also confirm the 20MM core and mounting pattern match.

Check the bore, stroke, mounting hole spacing, rod thread and port threads against your machine before ordering. Matching these details is the only way to confirm fit, as machine brackets vary.

The core is 20MM. It is the bore reference for the cylinder; measure your existing cylinder bore to confirm it matches before you order.

The cylinder is stainless steel. This suits woodworking environments where dust and moisture are present around the machine.

Only the two sizes shown, 20X225 and 20X250, are offered. No other stroke lengths are stated for this cylinder.

It ships in a standard export package. No other packing details are specified.

Send the stroke you need, the 20MM core size, your mounting hole spacing and a photo of the old cylinder so the correct size can be confirmed.

It is a machine spare part for woodworking machinery. Confirm the dimensions against your machine before ordering, as fit depends on your specific bracket and air line.