28mm Thickness PSW035 65x12x28mm Rubber Press Roller For Edge Banding Machine

This is a cream rubber press roller with a bearing, sized φ65*φ12*28mm, for Cehisa edge banding machines. It presses edge banding against the workpiece after application, helping adhesion and a neat finish. The 65mm outer diameter, 12mm inner diameter and 28mm thickness match the PSW035 position. Before ordering, check your machine's roller bore, width and mounting to confirm the 12mm bore and 28mm width fit your spindle and arm.

When the press roller wears or flats, edge banding can lift or sit uneven along the workpiece edge. A worn roller no longer applies even pressure after the banding is applied, so adhesion becomes inconsistent. Replacing the worn PSW035 restores the pressure point that helps hold the banding flat while the glue sets.

The PSW035 is a rubber press roller with a bearing, measuring φ65*φ12*28mm: 65mm outer diameter, 12mm inner diameter and 28mm thickness. It fits Cehisa edge banding machines. To confirm fit, measure your old roller's outer diameter, bore and width, and check how it mounts on the machine arm before ordering.

Check the 12mm bore and 28mm width against the spindle and mounting arm, and confirm the 65mm outer diameter clears the pressure area. The bearing lets the roller turn as the workpiece passes. A correct fit means the roller applies pressure to the banding without rubbing or binding.

We supply various press wheels, so send your machine model and the old roller's 65mm outer diameter, 12mm bore and 28mm width with your enquiry. State the quantity you need. Packing and customisation details are not specified here, so ask if you need them. Photos of the old part help confirm the PSW035 match.

What the specification fixes, and what it leaves to the machine:

• Pressure point after banding application — The rubber roller presses the edge banding against the workpiece edge after application, helping the banding sit flat while the adhesive takes hold.
• Bore fit on the mounting spindle — A 12mm inner diameter fits the machine spindle; check your old roller's bore before ordering to confirm the PSW035 matches.
• Roller width against the banding line — The 28mm thickness sets how much of the banding line the roller covers; compare it with your old roller and the banding height you run.
• Outer diameter and pressure area — A 65mm outer diameter defines the contact area against the workpiece; measure your old roller to confirm the same size.
• Bearing and roller rotation — The bearing lets the roller turn as the workpiece moves through, so the rubber surface rolls instead of dragging on the banding.
• Rubber surface at the glue line — Rubber contacts the freshly applied banding; a worn or flat rubber surface is the usual reason to replace the roller.
• Wear check before replacement — Inspect the rubber for flats, cracks or a polished surface, and check the bearing for play, before ordering a replacement.

What changes on the shop floor when the right part goes back in:

• Restores even pressure at the banding line. A worn roller can let banding lift or sit uneven; fitting the PSW035 puts a 65mm rubber roller back against the workpiece edge.
• Size match cuts guesswork. With a 65mm outer diameter, 12mm bore and 28mm width, you can compare directly with the old roller before ordering.
• Bearing keeps the roller turning. The bearing lets the roller rotate with the workpiece instead of dragging, which helps the rubber surface run smoothly along the banding.
• Rubber contacts the glue line. Rubber is the surface that meets the freshly applied banding, so replacing a worn rubber roller addresses the usual cause of poor contact.
• One part number for reordering. The PSW035 model number makes repeat orders straightforward once you have confirmed the size against your Cehisa machine.
• Simple wear inspection. Check the rubber for flats or cracks and the bearing for play; these checks tell you when the roller needs replacing.
• Supply help for press wheels. We supply various press wheels, so send your machine model and old roller dimensions with your enquiry to confirm the right part.

Check the size against your old roller first: the PSW035 has a 65mm outer diameter, 12mm bore and 28mm width and is made for Cehisa edge banding machines. Compare those figures with your old part and mounting before ordering.

It measures φ65*φ12*28mm. That is a 65mm outer diameter, a 12mm inner diameter and a 28mm thickness, with a rubber body and a bearing.

Look for flats, cracks or a polished rubber surface, and check the bearing for play. If the banding no longer sits flat after application, a worn roller is a common cause to check.

The roller is supplied with a bearing as part of the assembly. Confirm the 12mm bore and 28mm width match your spindle and mounting arm before fitting.

It is specified for Cehisa edge banding machines. For another machine, compare the 65mm outer diameter, 12mm bore and 28mm width with your old roller before ordering.

Send your machine model, the old roller's 65mm outer diameter, 12mm bore and 28mm width, the quantity you need, and a photo of the old part if you have one.

We supply various press wheels. Send the dimensions and machine details of the wheel you need, and we can check it against the PSW035 and other options.

Packing details are not specified here. Tell us your quantity and any packing requirements in your enquiry so we can confirm what is possible.