CEHISA Edgebander Buffing Wheel Buffing Pads For Edge Banding Machine 150mm

This is a CEHISA buffing wheel for edgebanding machines, size φ150Xφ14X20mm. It polishes the edge after trimming. The wheel is made of cotton and steel, with a 150mm outer diameter, 14mm inner diameter, and 20mm thickness. It fits CEHISA edgebanders. To confirm fit, check your machine's arbor size and that it accepts a 150mm wheel. The cotton material is for buffing, and the steel core mounts on the arbor. Use it as a direct replacement for worn buffing wheels on CEHISA edgebanders.

When edgebanding, the buffing wheel is the last step before the panel leaves the machine. A worn or loaded wheel leaves smears and dull edges, and the operator has to stop and clean or replace it. This wheel addresses that final polish stage on CEHISA edgebanders.

The wheel measures φ150Xφ14X20mm: 150mm outer diameter, 14mm inner diameter, and 20mm thickness. Cotton and steel are the materials. It fits CEHISA edgebanding machines. To confirm fit, check the arbor diameter on your machine and that the buffing station accepts a 150mm wheel.

Mounting is on the buffing station arbor. The 14mm inner diameter must match the arbor, and the 20mm thickness sets the wheel width in the station. Check that the wheel spins freely and that the cotton face contacts the edge evenly.

Supply comes as the wheel only. Customisation or OEM is supported; contact the supplier for details. When enquiring, send your machine model, the arbor diameter, and the size you need. That lets the supplier confirm the BW009 wheel suits your CEHISA edgebander. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Final polish step — The wheel mounts at the buffing station to polish the edge after trimming and scraping.
• Arbor fit check — The 14mm inner diameter must match your machine's buffing arbor before mounting.
• Wheel width in station — At 20mm thick, the wheel sets the buffing contact width in the station.
• Cotton buffing face — Cotton material provides the buffing action against the edgebanded panel surface.
• Steel core mounting — The steel core takes the arbor load and holds the wheel concentric during rotation.
• Machine compatibility — Fits CEHISA edgebanding machines; confirm your model before ordering.
• Outer diameter size — The 150mm outer diameter defines the wheel's working circumference at the buffing station.
• Wear replacement point — Replace the wheel when the cotton face loads up or the polish quality drops.
• Spin clearance check — Check the wheel spins freely on the arbor with no rub against guards or guides.
• Model identification — BW009 identifies this wheel; quote it when ordering replacements or spares.
• Size — Ø150 × Ø14 × 20 mm, the figure to check against the worn part before ordering.
• Fit — built for Cehisa Edgebanding Machine, in the position the original part occupied.

What changes on the shop floor when the right part goes back in:

• Keeps the polish step running. A fresh cotton wheel at the buffing station restores the final polish on edgebanded panels, so the operator is not stopping to clean a loaded wheel mid-run.
• Fit is checked before you buy. With a 14mm inner diameter and 150mm outer diameter, you can compare against your arbor and station before ordering, avoiding a wheel that will not mount.
• Width matches the station. The 20mm thickness sets the wheel width in the buffing station, so the cotton face contacts the edge across the intended band width.
• Cotton face for buffing. Cotton is the buffing material on this wheel, giving the contact face that works the edge after trimming and scraping operations.
• Steel core holds the arbor. The steel core carries the wheel on the 14mm arbor and keeps it running true, which matters when the wheel is spinning at the station.
• One model to reorder. BW009 is the model reference for this 150X14X20mm wheel, so reordering the same size for your CEHISA edgebander is straightforward.
• Customisation is available. Customisation or OEM is supported; contact the supplier with your requirements if the standard BW009 wheel does not match your setup.

Check the arbor diameter and buffing station size on your machine. The wheel has a 14mm inner diameter and 150mm outer diameter; if your arbor and station match those, it fits.

The wheel is φ150Xφ14X20mm: 150mm outer diameter, 14mm inner diameter, and 20mm thickness.

Cotton and steel. The cotton is the buffing face, and the steel core mounts on the arbor.

Replace it when the cotton face loads up or the edge polish drops off. A loaded wheel leaves smears, so swap it to restore the final polish.

Customisation or OEM is supported. Contact the supplier with your requirements, and they will confirm what can be done.

Send your machine model, the arbor diameter, and the wheel size you need. That lets the supplier confirm the BW009 wheel suits your CEHISA edgebander.

The wheel is for CEHISA edgebanding machines. For part-origin questions, ask the supplier directly when you enquire.

It mounts on the buffing station arbor. The 14mm inner diameter must match the arbor, and the wheel should spin freely without rubbing guards.