04 09 Type Digital Position Indicator Electronic Position Indicator For Woodworking Machine

The 04 09 Type Digital Position Indicator is an electronic counter for woodworking machinery shaft bore holes, used on edge banding machines. It is made of polyamide with a glossy orange and black finish, counts clockwise or anti-clockwise, and comes individually packed. Two SKUs are shown: 0412-1.01-14-O-A and 0912-4.01-20-0-B. Before ordering, confirm your bore diameter, counting direction, axial pitch, and install model against the model code on your machine.

When a manual counter drifts or a handwheel scale is hard to read, operators lose track of position and parts come out short or long. The 04 09 Type Digital Position Indicator gives a direct digital readout on shaft bore hole adjustments, so the operator sets the number and works to it.

This is a digital position indicator in a polyamide shell with a glossy orange and black surface, counting clockwise or anti-clockwise. It fits woodworking machinery shaft bore holes.

Check the bore diameter and counting direction before mounting, because a clockwise unit will not read correctly where the shaft turns anti-clockwise. The polyamide body resists solvents, oils, greases, and other chemical agents, which suits shop floors where lubricants and cleaning agents are present.

Each indicator ships in an individual package. The 04 and 09 types are adjustable series, and other types are available on request. When enquiring, send the model code from your old indicator, the bore diameter, counting direction, axial pitch, and install model, plus the machine make and the quantity you need.

The 04 and 09 types are part of an adjustable series, and other types can be supplied on request. Each unit comes in an individual package.

What the specification fixes, and what it leaves to the machine:

• Shaft bore fit — Fits woodworking machinery shaft bore holes, so the indicator mounts where the existing counter or scale sat on the adjustment shaft.
• Edge banding use — Used as edge banding machine accessories, where the operator needs a readable position number for repeatable setup.
• Shell material — Polyamide shell with a glossy orange and black surface, giving a smooth face that wipes clean with a shop rag.
• Counting direction — Counts clockwise or anti-clockwise, so you can match the indicator to the direction your shaft actually turns.
• Chemical resistance — The polyamide body resists solvents, oils, greases and other chemical agents found around lubricated woodworking machinery.
• Readability — Glossy surface and digital display keep the count visible, so the operator reads position without leaning over the machine.
• Install model — Install model 12 is marked in the model code, letting you match the mounting pattern to the bracket on your machine.
• Axial pitch — Axial pitch is coded in the model number, so you can confirm the pitch matches the shaft before the unit is shipped.
• Individual package — Each indicator ships in an individual package, protecting the display face and shell until it is fitted.

What changes on the shop floor when the right part goes back in:

• Read the number, not the scale. A digital readout replaces counting marks by eye, so the operator sets a number and returns to it on the next run.
• Match the turn direction. Clockwise and anti-clockwise counting options mean the indicator reads up in the direction your shaft turns, not backwards.
• Survives shop fluids. Polyamide resists solvents, oils, greases and other chemical agents, so lubricant splash and cleaning wipes do not break down the shell.
• Confirm fit from the code. The model code carries bore diameter, counting direction, axial pitch and install model, so you can check the match before ordering.
• Glossy face stays readable. The glossy orange and black surface keeps the display legible, helping the operator read position under normal shop lighting.
• Two types to start from. 04 and 09 types are both covered, and other types are available on request, so a mixed machine floor can be equipped from one source.
• Protected in transit. Individual packaging keeps the display face and polyamide shell away from knocks and dust before the unit reaches the machine.
• It fits the machine you already run. The position indicator is made for Woodworking Machinery Shaft Bore Hole, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Match the model code on your old indicator to 0412-1.01-14-O-A or 0912-4.01-20-0-B. Check bore diameter, counting direction, axial pitch and install model against the code, and send the old code with your enquiry.

Choose clockwise or anti-clockwise to match your shaft rotation. The counting direction is coded in the model number, so confirm it before ordering.

The shell is polyamide with a glossy orange and black surface. Polyamide resists solvents, oils, greases and other chemical agents.

Yes, other types are available on request. Send the model code, bore diameter, counting direction, axial pitch and install model you need.

Each indicator ships in an individual package. That protects the display face and shell until it is fitted.

Send the old model code, bore diameter, counting direction, axial pitch, install model, machine make and the quantity you need. That lets the supplier match the SKU to your shaft.

It fits woodworking machinery shaft bore holes and is used as an edge banding machine accessory. Confirm the bore diameter against your shaft before mounting.

The glossy surface keeps the digits visible under normal shop lighting. Wipe the face with a rag to clear dust before reading.