3607112720 SPROCKET Z 15 06B-1 Woodworking Machinery Accessories For Homag

This 3-607-11-2720 sprocket, with 15 teeth (Z=15), is a 06B-1 chain sprocket for Homag woodworking machines. It replaces a worn sprocket that causes chain slip or uneven feed. The 15-tooth count sets the chain speed; confirm your old sprocket also has 15 teeth and fits 06B-1 chain before ordering. SHUNHONGYU supplies various woodworking machine parts; contact us with your machine model and part number to confirm fitment.

When a sprocket wears on a Homag machine, the chain starts to run loose or jump teeth. Feed becomes uneven, and the chain and sprocket wear faster. Replacing the sprocket at the first sign of hook-shaped teeth or a slack chain keeps the drive running smoothly and avoids a breakdown mid-shift.

The 3-607-11-2720 is a sprocket with 15 teeth (Z=15) for 06B-1 chain. It fits Homag woodworking machines that use this part number. To confirm fit, check the part number on the old sprocket or the machine's parts book, and count the teeth: it must be 15. Also check that the chain is 06B-1.

Before mounting, check the shaft and keyway for wear and make sure the chain is not stretched. A worn shaft or stretched chain will wear a new sprocket quickly. Align the sprocket with the drive sprocket so the chain runs straight. Correct alignment and a good chain reduce noise and extend sprocket life.

SHUNHONGYU supplies various woodworking machine parts. Shipment is by DHL, FedEx, UPS, etc. When you enquire, send the part number 3-607-11-2720, the machine model, and the number of teeth you need. Photos of the old sprocket and the shaft help confirm the fit. Contact us now to check availability.

What the specification fixes, and what it leaves to the machine:

• Tooth count for chain speed — 15 teeth (Z=15) sets the chain speed on the machine; confirm your old sprocket has the same tooth count before ordering.
• Chain size match — The sprocket is for 06B-1 chain; check the chain marking on your machine to confirm it matches.
• Part number identification — Homag part number 3-607-11-2720 and 3607112720 are marked for identification; use them to match your parts book.
• Machine fit — Fits Homag woodworking machines that use this part number; check your machine model and parts list before ordering.
• Wear check before fitting — Inspect the old sprocket for hooked teeth or a slack chain; replace it before the chain jumps or the feed becomes uneven.
• Shaft and keyway check — Check the shaft and keyway for wear before mounting; a worn shaft will wear a new sprocket quickly.
• Chain condition check — A stretched chain wears a new sprocket fast; check chain stretch and replace the chain if it is worn.
• Alignment at installation — Align the sprocket with the drive sprocket so the chain runs straight; misalignment causes noise and early wear.
• Shipping options — Shipment by DHL, FedEx, UPS, etc.; choose the carrier that suits your delivery address and schedule.

What changes on the shop floor once the unit is in place:

• Correct tooth count avoids chain slip. A 15-tooth sprocket (Z=15) matches the chain speed the machine was built for. Using the wrong tooth count causes uneven feed and rapid chain wear.
• Matched chain size keeps the drive smooth. The sprocket is made for 06B-1 chain. Matching the chain size prevents the chain from jumping or wearing the sprocket teeth unevenly.
• Part number match cuts ordering errors. The Homag part number 3-607-11-2720 and 3607112720 let you check against the parts book, so you order the right sprocket the first time.
• Early replacement prevents downtime. Replacing a worn sprocket before the chain jumps avoids a mid-shift stop. Check teeth for hooking and chain for slack at each service.
• Shaft check protects the new part. Checking the shaft and keyway before mounting stops a worn shaft from wearing the new sprocket. This simple check extends sprocket life.
• Alignment reduces noise and wear. Aligning the sprocket with the drive sprocket keeps the chain straight. Straight running cuts noise and slows wear on both sprocket and chain.
• Clear enquiry speeds up supply. Sending the part number, machine model, and tooth count with your enquiry helps confirm the fit. Shipment is by DHL, FedEx, UPS, etc.

Check the part number on your old sprocket or in the machine's parts book: it should be 3-607-11-2720 or 3607112720. Also count the teeth (15) and check that the chain is 06B-1.

Z=15 means the sprocket has 15 teeth. The tooth count sets the chain speed, so the replacement must have the same number of teeth as the old sprocket.

It is for 06B-1 chain. Check the marking on your chain or the machine's manual to confirm the chain size before ordering.

Replace the sprocket alone if the chain is still within wear limits. If the chain is stretched or the teeth are hooked, replace both to avoid rapid wear on the new sprocket.

Check the shaft and keyway for wear, check the chain for stretch, and align the sprocket with the drive sprocket so the chain runs straight. A worn shaft or misalignment shortens sprocket life.

Send your enquiry with the part number 3-607-11-2720, your machine model, and the tooth count. Shipment is by DHL, FedEx, UPS, etc.

SHUNHONGYU supplies various woodworking machine parts. Send the part numbers or photos of the parts you need, and we will check availability.

Include the part number, machine model, tooth count, and photos of the old sprocket and shaft. This helps confirm the fit and speeds up the quote.