Carbide Radius Trimming Knives 15X13X2mm Profile Knife for Edgebanding Machine

A carbide radius trimming knife for edgebanding machines, 15X13X2mm, Shunhongyu model EB009. It cuts the radius profile on banded edges. The 2mm carbide body holds a sharp edge through production runs. Before ordering, check that your machine's profile knife seat takes a 15X13X2mm insert and that the radius matches your edge profile. Customization is supported, so send your profile drawing or sample with the enquiry.

When the radius trim station starts leaving a stepped or torn edge, the knife edge has worn or chipped. A dull profile knife no longer cuts cleanly on the curve, so the banded edge needs hand work. Replacing the 15X13X2mm carbide knife restores the cut at the radius station without changing machine settings.

This is a carbide insert, Shunhongyu model EB009, sized 15X13X2mm with a 2mm thickness. It serves as a profile knife for edgebanding machines, cutting the radius on the edge. To confirm fit, measure the old insert's length, width and thickness and compare with 15X13X2mm, then check that the cutting profile matches your edge radius.

Check the knife seat and clamp for wear before mounting the new insert. A 2mm carbide body seats in the cutterhead pocket, and the clamp must hold it flat against the seat. If the seat is worn, the knife can shift under load, so inspect and clean the pocket first. A properly seated 15X13X2mm knife cuts a consistent radius.

The knives ship as individual inserts; customisation is supported, so profile geometry can be made to your drawing. Buyers should send the machine make and model, the old knife dimensions, and a profile drawing or sample when enquiring. That lets the supplier match the 15X13X2mm insert to your edgebanding machine's radius station.

What the specification fixes, and what it leaves to the machine:

• Radius trimming cut — The knife is shaped as a profile knife for edgebanding machines, cutting the radius on banded edges at the trim station.
• Insert size — Each insert measures 15X13X2mm, a size that fits profile knife seats designed for this footprint.
• Carbide body — Made from carbide, the 2mm thick insert holds a cutting edge through repeated trimming cycles on edgebanding machines.
• Model reference — Shunhongyu model number EB009 identifies this profile knife when ordering replacements or checking against an existing knife.
• Profile knife role — As a profile knife, it shapes the radius on the edge, not just the flush trim, so the banded edge follows the panel profile.
• Thickness check — The 2mm thickness is the dimension to verify against the cutterhead pocket depth before mounting the insert.
• Customisation option — Customisation is supported, so buyers can request profile geometry that matches their edgebanding machine and edge profile.
• Replacement fit — Use the 15X13X2mm size to compare with the old knife; matching length, width and thickness confirms the insert seats correctly.
• Edgebanding machine use — The insert is intended for edgebanding machines, where it mounts in the profile trim station to cut the radius.

What changes on the shop floor when the right part goes back in:

• Restores a clean radius cut. When the old knife stops cutting cleanly, a new 15X13X2mm carbide insert brings the radius station back to a consistent cut, reducing hand rework on banded edges.
• Size check before ordering. The 15X13X2mm dimensions give a direct comparison with the old insert. Measure length, width and thickness, and confirm the profile matches before you commit.
• Carbide holds the edge. Carbide construction on the 2mm insert resists wear at the cutting edge, so the knife keeps cutting the radius through production runs instead of dulling quickly.
• One insert, one station. The EB009 profile knife fits the radius trim station on edgebanding machines. Keeping the model number on file makes reordering straightforward when a knife is worn.
• Custom profile support. Customisation is supported, so you can supply a profile drawing or sample and have the 15X13X2mm insert made to match your machine's radius geometry.
• Clamp and seat check. A 2mm carbide body needs a flat seat and firm clamp. Checking the pocket before mounting helps the knife stay put and cut a stable radius.
• Clear enquiry path. Send the machine make and model, old knife dimensions and a profile drawing. That information lets the supplier confirm the 15X13X2mm insert suits your edgebanding machine.

Check the old insert first. Measure its length, width and thickness; if they match 15X13X2mm, the EB009 profile knife is the correct size for that seat. Also compare the cutting profile to your edge radius.

It cuts the radius profile on the banded edge. The profile knife shapes the edge at the trim station, while the 15X13X2mm insert mounts in the cutterhead to make that cut on the edgebanding machine.

Look at the cut. A worn or chipped carbide edge leaves a rough or stepped radius, and the banded edge needs hand work. Replacing the 15X13X2mm insert restores the cut at the radius station.

Carbide. The insert is a 2mm thick carbide body, Shunhongyu model EB009, sized 15X13X2mm and intended as a profile knife for edgebanding machines.

Yes, customisation is supported. Send a profile drawing or a sample of the cut you need, along with the machine make and model, and the insert can be made to match.

Inspect the knife seat and clamp. The 2mm carbide body must sit flat in the pocket with a firm clamp. Clean the seat and check for wear so the knife does not shift during the cut.

Send the machine make and model, the old knife dimensions, and a profile drawing or sample. That lets the supplier confirm the 15X13X2mm EB009 insert matches your edgebanding machine.

The knife is supplied as an insert, Shunhongyu model EB009, sized 15X13X2mm. For quantity and customisation details, include your requirements in the enquiry so the supplier can respond to your order.