3-801-26-8972 Drive Belt Wheel HTD-8M-8MGT3 Z 24 Woodworking Machinery Tool

When the drive-belt wheel wears or its teeth strip, the belt slips and the machine loses drive. You need the correct replacement, not a modified part. The 3-801-26-8972 wheel restores the HTD-8M-8MGT3 drive path on Homag equipment.

This is a new drive-belt wheel with an HTD-8M-8MGT3 profile and Z=24 teeth. It fits Homag woodworking machines as an accessory. Confirm the fit by matching the part number 3-801-26-8972 or 3801268972 and counting the teeth on your old wheel.

Check that the belt profile is HTD-8M-8MGT3 and that the shaft and mounting hardware match your existing wheel. The Z=24 tooth count sets the drive ratio; using the wrong count changes speed and torque. Mount it the same way as the original.

SHUNHONGYU supplies various woodworking machine parts. Shipment is by DHL, FedEx, UPS, or similar. When enquiring, send the part number 3-801-26-8972, the Z=24 tooth count, and your machine model so we can confirm the match. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch. The model number and the dimensions together identify the part. The part is supplied as a single replacement unit.

What the specification fixes, and what it leaves to the machine:

• Tooth count for drive ratio — Z=24 teeth on this wheel set the speed and torque balance, so the belt runs at the intended rate for the machine.
• Belt profile match — The HTD-8M-8MGT3 profile engages the matching belt without slipping, keeping power transfer steady during cutting cycles.
• Part number identification — 3-801-26-8972 and 3801268972 are the numbers to check against your old wheel before ordering a replacement.
• Machine fit — This wheel is an accessory for Homag woodworking machines, so it mounts on the same shaft as the original drive-belt wheel.
• Wear point to inspect — Teeth and belt contact surfaces wear over time; replacing the wheel when teeth show damage prevents belt slip and lost drive.
• Installation check — Before mounting, confirm the shaft and any mounting hardware match your existing wheel so the new part seats correctly.
• Condition — The wheel is new, so you are not fitting a used part with unknown wear or hidden damage from previous operation.
• Shipping method — Shipment is by DHL, FedEx, UPS, or similar, giving you a trackable delivery route for the replacement part.
• Accessory range — SHUNHONGYU supplies various woodworking machine parts, so you can source this wheel and other accessories in one enquiry.

What changes on the shop floor when the right part goes back in:

• Correct tooth count. With Z=24 teeth, the wheel keeps the original drive ratio, so machine speed and torque stay as designed instead of changing with a wrong-count part.
• Profile that grips. The HTD-8M-8MGT3 profile matches the belt groove, reducing slip at the pulley and keeping power delivery consistent through the cut.
• Identify by number. Using 3-801-26-8972 or 3801268972 to check your old wheel removes guesswork, so you order the wheel that matches your Homag machine.
• Fix the slip. When worn teeth cause the belt to slip, fitting this new wheel restores drive to the shaft and gets the machine back to production.
• Check before you fit. Confirming the shaft and mounting hardware match your existing wheel before installation avoids downtime from a part that will not seat.
• Trackable delivery. Shipment by DHL, FedEx, UPS, or similar means you can follow the parcel and plan the repair around its arrival.
• One enquiry, more parts. SHUNHONGYU supplies various woodworking machine parts, so you can ask about this wheel and other accessories together and save time.
• It fits the machine you already run. The drive-belt wheel is made for Homag machines, so it returns to the same shaft, bracket or spindle without re-machining the mounting.

Check the part number and tooth count against your old wheel. This wheel is an accessory for Homag machines with part number 3-801-26-8972 or 3801268972 and Z=24 teeth. If your old wheel matches those numbers, it is the intended replacement.

Z=24 is the number of teeth on the wheel. The tooth count sets the drive ratio between the belt and the shaft, so it must match the original to keep machine speed and torque correct.

The profile is HTD-8M-8MGT3. Your drive belt must have the same HTD-8M-8MGT3 profile for the teeth to engage correctly and transfer power without slipping.

It is new. You are fitting a wheel without previous wear, unlike a used part with unknown history. Inspect it on arrival as you would any new component.

Send us the part number 3-801-26-8972, the Z=24 tooth count, and your machine model. We can then check the details against your enquiry before you commit to the order.

Shipment is by DHL, FedEx, UPS, or similar. These carriers provide tracking, so you can follow the delivery and plan when to schedule the replacement.

Check that the shaft and mounting hardware match your existing wheel, and that the belt is HTD-8M-8MGT3. Mount it the same way as the original wheel so it seats correctly.

Yes. SHUNHONGYU supplies various woodworking machine parts. Include t