4-014-02-0549 JOINT CUTTER WEPLA L155 NL2X40 D40 Z2 Homag Machine Tool

When a joint cutter wears, the cut quality drops and the machine may not hold tolerance. This 4-014-02-0549 cutter addresses that by providing a fresh 40mm diameter and 2-flute cutting edge. It restores the jointing cut on Homag machines without changing other settings.

The 4-014-02-0549 joint cutter is a 155mm long tool with a 40mm diameter and 2 flutes. It fits Homag machines as a joint cutter. To confirm fit, match the part number 4-014-02-0549 4014020549 and check the 40mm diameter and 155mm length against your spindle.

Mount the cutter on the spindle and check that the 2 flutes are clear and the 40mm diameter runs true. A 155mm length gives reach for jointing cuts. Confirm rotation and seating before running the machine.

Supply includes the joint cutter as described. For customisation or packing details, ask. Send your machine model and the part number 4-014-02-0549 4014020549 with your enquiry so the fit is checked before you order. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch. The model number and the dimensions together identify the part. The part is supplied as a single replacement unit.

What the specification fixes, and what it leaves to the machine:

• Jointing cut on Homag machines — The 4-014-02-0549 joint cutter is intended for jointing cuts on Homag machines, so buyers replace the worn cutter with a matching part number.
• Length for reach — A 155mm length gives the cutter reach for jointing operations on Homag machines, letting the tool sit at the required position in the spindle.
• Cutting diameter — The 40mm diameter sets the cut size, and buyers confirm this 40mm figure against their machine before ordering the joint cutter.
• Flute count for chip flow — With 2 flutes, the cutter has two cutting edges, which affects chip clearance and cut balance during jointing on the Homag machine.
• Part number check — The part number 4-014-02-0549 4014020549 appears on the cutter, so buyers can match it to the existing tool before replacement.
• Spindle fit check — Check the 40mm diameter and 155mm length against the spindle and tool holder to confirm the joint cutter fits the Homag machine.
• Wear point on flutes — The 2 flutes are the wear point; inspect both edges for dulling and replace the joint cutter when the cut quality drops on the Homag machine.

What changes on the shop floor when the right part goes back in:

• Restores jointing cut. A worn joint cutter affects cut quality; fitting the 4-014-02-0549 with its 40mm diameter and 2 flutes brings the jointing operation back to a fresh cutting edge on the Homag machine.
• Easy fit confirmation. The 155mm length and 40mm diameter give two dimensions to check against the spindle, so you can confirm the joint cutter fits before ordering the part.
• Clear replacement path. Using the part number 4-014-02-0549 4014020549 removes guesswork; the buyer matches the existing tool and orders the same joint cutter for the Homag machine.
• Two-flute chip handling. The 2-flute design gives two cutting edges for chip clearance, which matters when jointing cuts produce chips that must clear the cut on the Homag machine.
• Dimension-led ordering. Because the cutter is 155mm long with a 40mm diameter, you can measure the old tool and compare, reducing the chance of ordering a joint cutter that does not fit.
• Wear inspection point. The 2 flutes are easy to inspect for wear; checking both edges helps you decide when to replace the joint cutter before cut quality drops on the Homag machine.

It fits Homag machines. The 4-014-02-0549 joint cutter is intended for Homag woodworking machines, and you confirm fit by checking the 40mm diameter and 155mm length against your spindle.

The cutter is 155mm long with a 40mm diameter. It has 2 flutes, and these dimensions are the ones to check against your machine before ordering the joint cutter.

Match the part number 4-014-02-0549 4014020549 on the cutter. The same number appears as 4014020549, so check both forms against your existing tool before you order.

It has 2 flutes. The Z2 configuration means two cutting edges, so inspect both flutes for wear and confirm rotation after mounting on the Homag machine.

Mount it on the spindle and check that the 40mm diameter runs true. The 155mm length must clear the machine, and you should confirm rotation and seating before running.

Send your machine model and the part number 4-014-02-0549 4014020549. That lets the fit for the Homag machine be checked, and you can also ask about packing or customisation.

Ask about customisation with your enquiry. The standard joint cutter is the 4-014-02-0549 with 155mm length, 40mm diameter and 2 flutes, and any custom request should be confirmed first.

Replace it when the 2 flutes show wear or the jointing cut quality drops. A fresh 4-014-02-0549 cutter with its 40mm diameter restores the cutting edge on the Homag machine.