4-070-01-1014 DC Gear Motor 16 V DC Spares for Homag Holzma Beam Saw Unit

When a Homag Holzma beam saw stops indexing or its movement becomes erratic, the cause is often the small DC gear motor that drives the mechanism. A motor with worn gears or a failing winding cannot hold the 0.25 Nm torque needed for repeatable positioning.

The 4-070-01-1014 is a DC gear motor rated at 0.25 Nm torque and 16 V DC. It is identified by part number 4-070-01-1014 (4070011014) and model number Nidec Valeo 127 P91 051. It fits Homag Holzma beam saws. Before ordering, compare the part number and model number on your existing motor with these numbers, and confirm the 16 V DC supply and 0.25 Nm torque rating.

Check the mounting flange and shaft coupling on the machine before installation. The motor must align with the driven component so the 0.25 Nm torque transfers without binding. A correct fit prevents premature gear wear and keeps movement smooth. During installation, verify the 16 V DC connection polarity and secure the motor to avoid vibration loosening the mounting.

This motor is a spare part for Homag Holzma beam saws. SHUNHONGYU supplies various woodworking machine parts. When enquiring, send the part number 4-070-01-1014 or 4070011014, the model number Nidec Valeo 127 P91 051, and the machine model to confirm compatibility. No packing or customisation details are specified; contact us for current supply information.

What the specification fixes, and what it leaves to the machine:

• Torque rating for controlled movement — The 0.25 Nm torque rating suits mechanisms that need controlled force without overloading the gear train.
• Voltage match for Homag saws — A 16 V DC supply matches the electrical system of Homag Holzma beam saws, avoiding voltage mismatch.
• Part number identification — The part number 4-070-01-1014 and alternate 4070011014 allow direct cross-reference with the existing motor.
• Model number cross-check — Model number Nidec Valeo 127 P91 051 provides an additional identifier for verifying the correct replacement.
• Gear motor for precise indexing — As a DC gear motor, it delivers controlled motion for indexing tasks that require repeatable positioning on the saw.
• Durable construction for wear points — The motor is built for durability, addressing wear on gears and windings that occurs in continuous beam saw operation.
• Efficient power transmission — Internal gearing is designed for efficient power transmission, reducing energy loss between the motor and driven component.
• Installation alignment check — Before mounting, check the flange and shaft coupling alignment to ensure the 0.25 Nm torque transfers without binding.
• Spare part for Homag Holzma — This motor is a spare part for Homag Holzma beam saws, fitting machines that use the 4-070-01-1014 part number.

What changes on the shop floor when the right part goes back in:

• Restores controlled movement. A failed motor stops the saw from indexing accurately. Replacing it with the 4-070-01-1014 unit brings back the 0.25 Nm torque needed for repeatable positioning.
• Reduces guesswork in ordering. The part number 4-070-01-1014 and model number Nidec Valeo 127 P91 051 give two identifiers to match against the old motor, lowering the risk of wrong parts.
• Matches the machine's electrical system. The 16 V DC rating is specified for Homag Holzma beam saws, so the motor works with the existing supply without voltage adaptation.
• Cuts downtime from misalignment. Checking the flange and shaft coupling before installation helps avoid binding that can wear gears prematurely and cause repeated failures.
• Simplifies spare part sourcing. SHUNHONGYU supplies various woodworking machine parts, so the motor can be ordered alongside other spares for the same machine.
• Supports efficient power use. The gear motor design transmits power efficiently to the driven component, reducing energy loss and heat buildup during operation.
• Provides a clear fitment check. Buyers can confirm compatibility by comparing the part number, model number, and 0.25 Nm torque rating with the existing motor before ordering.

Check the part number and model number on your existing motor. This motor is a spare for Homag Holzma beam saws and carries part number 4-070-01-1014 and model number Nidec Valeo 127 P91 051. Match both numbers to confirm fit.

The torque rating is 0.25 Nm. This figure is the specified torque for the 4-070-01-1014 DC gear motor and should match the requirement of the mechanism it drives.

It requires 16 V DC. Confirm that your machine's supply is 16 V DC before connecting, as the motor is rated for this voltage.

The model number is Nidec Valeo 127 P91 051. Use this along with the part number 4-070-01-1014 to verify the correct replacement.

Align the motor with the driven component and secure the mounting. Check the flange and shaft coupling for correct fit, and verify the 16 V DC connection polarity before operation.

Send the part number 4-070-01-1014 or 4070011014, the model number Nidec Valeo 127 P91 051, and your machine model. This helps confirm compatibility and current supply.

The motor is identified by the part number 4-070-01-1014 and model number Nidec Valeo 127 P91 051. Contact SHUNHONGYU with these numbers to confirm the part's origin and suitability for your machine.

Contact SHUNHONGYU for minimum order quantity and availability. Supply details are not specified here; the part number and model number will help with the enquiry.