4001380001 RESILIENT THRUST PADS KM 6 AUTOMATENST Machinery Accessories

When a Homag machine develops play at a thrust point, the usual cause is a worn pad that no longer holds its position. The 4001380001 pad takes up that thrust and keeps the moving part aligned. Left changed too late, the wear spreads to the screws and the bore.

Each pad is a metal resilient thrust pad with the mode number 4-001-38-0001 or 4001380001, made for Homag woodworking machines and marked KM 6 AUTOMATENST. Confirm the fit by finding that same number in your machine's parts manual and matching the pad to the mounting point shown there.

Mount the pad at the marked thrust point and secure it with the screws and fasteners that hold the original. Clean the area first so debris or oil does not sit under the pad. Correct seating keeps the thrust face flat against its mating surface, so the pad carries load evenly instead of rocking.

Pads ship by DHL, FedEx, UPS and other carriers. SHUNHONGYU supplies various woodworking machine parts; send the mode number 4-001-38-0001 or 4001380001, the machine model and the quantity you need with your enquiry so the correct pad is picked. Supply comes from the same range as the rest of the catalogue.

What the specification fixes, and what it leaves to the machine:

• Thrust-point wear control — The pad sits at the thrust point and takes the rubbing load, so the screw and bore see less wear over the machine's working life.
• Homag machine fit — Made for Homag woodworking machines, the pad carries the KM 6 AUTOMATENST marking that ties it to that thrust position.
• Metal construction — Metal construction gives the pad a firm thrust face that holds its shape under load instead of flattening out at the contact point.
• Original-part replacement — As an original accessory, the pad matches the form of the part it replaces, so it drops into the existing mounting point.
• Mode number check — The mode number 4-001-38-0001 or 4001380001 lets a buyer confirm the pad against the machine's parts manual before ordering.
• Secure screw mounting — The pad mounts with screws and fasteners at the designated point, keeping the thrust face flat against its mating surface in use.
• Clean-seat installation — Cleaning debris, oil and dust from the installation area before mounting lets the pad seat flat and carry thrust evenly.
• Carrier options — Shipment by DHL, FedEx, UPS and other carriers gives buyers a choice of delivery route for pad orders.

What changes on the shop floor when the right part goes back in:

• Catches wear before it spreads. Replacing the pad at the thrust point stops the rubbing load from reaching the screw and bore, which keeps the repair to one part instead of several.
• Fit confirmed by number. The mode number 4-001-38-0001 or 4001380001 can be checked against the parts manual, so the buyer orders the pad that matches the machine.
• Holds alignment in use. A flat-seated metal pad carries thrust evenly at the contact point, which helps the moving component stay aligned through woodworking operations.
• Original form for the job. Because the pad is an original accessory, it matches the mounting point it was made for, so installation follows the same steps as the part it replaces.
• Installation you can plan. Power off, protective gear and a clean installation area are the stated steps, so the pad change can be scheduled into a maintenance stop.
• Delivery options that suit. DHL, FedEx, UPS and other carriers are available, letting the buyer pick a shipping route that fits the workshop's schedule.
• One enquiry covers the order. Sending the mode number, machine model and quantity with the enquiry lets SHUNHONGYU pick the correct pad from the woodworking machine parts it supplies.

It fits Homag woodworking machines. The pad is marked KM 6 AUTOMATENST, and you should confirm the mounting point against your machine's parts manual before ordering.

Check the mode number 4-001-38-0001 or 4001380001 in your machine's parts manual. If that number appears for the thrust point you are repairing, the pad is the match.

It is metal. The metal face takes the thrust load at the contact point and holds its shape under the rubbing load of the moving component.

It mounts at the designated thrust point and is secured with screws and fasteners. Clean the area of debris, oil and dust first so the pad seats flat.

Yes, following the stated steps: power off and disconnect the machine, wear protective gloves and safety goggles, and read the machine manual and installation guide first.

Shipment is by DHL, FedEx, UPS and other carriers. The carrier choice is part of the order arrangement.

Send the mode number 4-001-38-0001 or 4001380001, your machine model and the quantity you need. That lets SHUNHONGYU match the pad to the thrust point you are repairing.

Yes. SHUNHONGYU supplies various woodworking machine parts, so you can include other part numbers for the same machine in the same enquiry.