PTFE Shovel Cleaning Tool For Edgebander Glue Pot Adhesive Removal Tool

Glue pot cleaning is where edgebander downtime hides. Adhesive cures on the pot walls and around the outlet, and a steel scraper can gouge the surface or drag sticky residue back into the melt. The PTFE Shovel gives the operator a 60 mm scraping head to lift that adhesive without the glue clinging to the tool itself.

This is a white PTFE scraper measuring 149 mm long, 39 mm wide, and 5 mm thick. The scraping head is 60 mm of that length. It is a hand tool for adhesive removal in edgebander glue pots.

Hold the 39 mm wide body and work the 60 mm scraping head along the pot wall. The 5 mm thickness gives the blade enough body to push against cured adhesive without folding. Because the material is non-stick, adhesive releases from the head instead of loading it up, so you spend time scraping the pot rather than cleaning the tool.

Supply is the bare tool. No packaging, customisation, MOQ, lead time, or price terms apply beyond what is stated here. When enquiring, send the glue pot model, the internal dimensions of the pot, and how much clearance you have around the outlet so the 149 mm length and 60 mm head can be checked against your machine.

What the specification fixes, and what it leaves to the machine:

• Pot wall scraping — A 60 mm scraping head reaches along the glue pot wall to lift cured adhesive before it hardens into a ridge.
• Non-stick blade face — PTFE releases adhesive from the 60 mm head instead of holding it, so the tool stays clean between passes.
• Overall reach — At 149 mm long, the scraper reaches into the pot while the hand stays clear of the heated body.
• Grip width — The 39 mm wide body gives enough surface for a gloved hand to hold and control the 60 mm head.
• Blade stiffness — A 5 mm thickness gives the scraping head enough body to push against adhesive without folding.
• Heat resistance — PTFE withstands the heat at the glue pot, so the scraper can work close to the melt without softening.
• Corner access — The 60 mm head is narrow enough to work into pot corners where adhesive collects and hardens.
• White colour — White PTFE shows adhesive residue clearly, so the operator can see when the head needs a wipe.
• Hand tool format — No mounting is required; the 149 mm scraper is held by hand and worked along the pot wall.

What changes on the shop floor once the unit is in place:

• Adhesive lets go of the blade. Because PTFE is non-stick, cured glue releases from the 60 mm scraping head instead of loading it up, so the operator spends time on the pot rather than on cleaning the tool.
• Fewer sharp-tool marks in the pot. A PTFE scraping head gives the operator a softer edge than steel for lifting adhesive, which matters when the pot surface must stay smooth for consistent melt.
• Reaches the corners of the pot. The 60 mm scraping head is narrow enough to work into corners and along walls where adhesive collects, so the whole pot gets cleared in one pass.
• Hand stays back from the heat. With 149 mm of length, the hand grips well behind the 60 mm head, keeping the operator clear of the heated pot body during scraping.
• Blade holds its shape under load. At 5 mm thick, the scraping head has enough body to push against hardened adhesive without folding, so each pass removes material instead of flexing.
• Works at glue pot temperature. PTFE is heat resistant, so the scraper can be used close to the melt without the head softening or losing its edge during the scrape.

Check the 60 mm scraping head against your pot corners and the 149 mm overall length against the pot opening; if both clear, it fits. Send the pot model and internal dimensions with your enquiry and the fit can be confirmed before you order.

No, PTFE is non-stick, so adhesive releases from the 60 mm scraping head instead of building up on it. That means you wipe the tool between passes rather than scraping glue off the tool itself.

Yes, PTFE is heat resistant, so the scraper can work close to the melt. Keep the hand behind the 149 mm length and away from the heated pot body.

The scraper is 5 mm thick overall. That gives the 60 mm scraping head enough body to push against cured adhesive without folding during the scrape.

White. The colour makes adhesive residue visible on the 60 mm head, so the operator can see when it needs a wipe.

149 mm long, 39 mm wide, and 5 mm thick, with a 60 mm scraping head. The 39 mm width is the grip area behind the head.

Wipe the non-stick PTFE head; adhesive releases from the 60 mm surface without solvent. No special storage is needed between uses.

Send the glue pot model, the internal pot dimensions, and the clearance around the outlet. That lets the 149 mm length and 60 mm head be checked against your machine before ordering.