3-014-11-1430 Drive Coupling For Edge Bander Machine 3014111430 Gear Wheels

When the gear wheel coupling wears on a Homag edgebander, the feed can hesitate or the edge finish can drift. The 3014111430 coupling sits in the gear system, so a worn part affects torque transmission. Replace it to restore consistent power flow through the machine.

This is a gear wheel coupling with Homag number 3014111430 or 3-014-11-1430. It fits Homag KAL, KFL, and Ambition series edgebanders and Brandt edge bander machines. Check your parts book for 3014111430 and compare the original coupling's gear teeth and bore to confirm fit.

Inspect the mating gear and shaft splines for wear before mounting. The coupling must seat fully and align with the gear train. Proper seating keeps torque transfer smooth and reduces strain on adjacent parts. A loose or misaligned coupling can cause noise and repeat failure.

SHUNHONGYU supplies various woodworking machine parts. Shipment is by DHL, FedEx, UPS, etc. When enquiring, send the part number 3014111430 and photos of the old coupling, including gear teeth and bore. Contact us now to confirm availability and shipping. Supply comes from the same range as the rest of the catalogue. Send the machine model with the enquiry so the fit is checked before dispatch.

What the specification fixes, and what it leaves to the machine:

• Torque transfer — The gear wheel coupling transmits mechanical power and torque through the edgebander's gear system, keeping feed and edge processing consistent under load.
• Machine fit — Fits Homag KAL, KFL, and Ambition series edgebanders and Brandt edge bander machines, covering common models in woodworking shops.
• Part identification — Homag number 3014111430 or 3-014-11-1430 appears on the coupling, so you can match it directly to your machine's parts book.
• Wear point — The coupling is a wear item in the gear train; replacing a worn unit restores torque transmission and reduces strain on adjacent gears.
• Installation check — Before mounting, check the mating gear and shaft splines for wear; a fully seated coupling aligns with the gear train for smooth operation.
• Durability — Durable construction is intended for continuous operation in industrial edgebanding, helping the coupling withstand the demands of daily production.
• Precision — Precise manufacturing supports proper fitment with the gear system, which helps maintain edge banding precision and efficiency.
• Spare part role — As an edgebanding machine spare part, it keeps a worn gear coupling from causing feed hesitation or inconsistent edge finish.
• Shipping options — Shipment by DHL, FedEx, UPS, etc., gives you flexible delivery choices for urgent spare part orders.

What changes on the shop floor when the right part goes back in:

• Restores torque flow. A worn coupling can slip or hesitate; fitting the 3014111430 gear wheel coupling brings torque transfer back to the gear system, so feed and edge processing stay consistent through the run.
• Covers common models. Because it fits Homag KAL, KFL, and Ambition series and Brandt edge bander machines, one part number 3014111430 can cover several machines in your shop, simplifying spare parts stock.
• Easy to identify. The Homag number 3014111430 or 3-014-11-1430 on the coupling lets you match it to your parts book without guessing, reducing wrong-part orders and downtime.
• Built for daily use. Durable construction is intended for continuous operation, so the coupling can withstand the demands of industrial edgebanding and help avoid premature wear in the gear train.
• Precise fitment. Precise manufacturing supports proper integration with the gear system, which helps maintain edge banding precision and efficiency after replacement.
• Simple fitment check. Checking the original coupling's gear teeth and bore against 3014111430 confirms fit before you order, so you avoid return shipping and waiting for the correct part.
• Flexible shipping. Shipment by DHL, FedEx, UPS, etc. means you can choose a carrier that suits your timeline, getting the spare part to your shop when you need it.

Yes, if your machine uses Homag number 3014111430 or 3-014-11-1430. Check your parts book for that number and compare the original coupling's gear teeth and bore to confirm.

It fits Homag KAL, KFL, and Ambition series edgebanders and Brandt edge bander machines. The part number 3014111430 is the key identifier.

Look for 3014111430 or 3-014-11-1430 on the old coupling or in your machine's parts book. A photo of the old part with the number visible helps us confirm.

Inspect the mating gear and shaft splines for wear, and make sure the coupling seats fully. Proper alignment with the gear train keeps torque transfer smooth.

A worn coupling can cause feed hesitation or inconsistent edge finish because torque transmission through the gear system is affected. Replacing it restores consistent power flow.

Shipment is by DHL, FedEx, UPS, etc. Contact us with your order details and we will confirm the shipping method for your location.

Yes, SHUNHONGYU supplies various woodworking machine parts. Send your list along with the 3014111430 coupling enquiry to confirm availability.

Send the part number 3014111430, photos of the old coupling showing gear teeth and bore, and your machine model. This helps us confirm the correct part and shipping.